Austenite–ferrite transformation in enhanced niobium, low carbon steel
Source abstract
Abstract
The austenite to ferrite transformation characteristics of a commercial high strength line pipe steel containing 0·05 wt- carbon and 0·095 wt- niobium have been rigorously studied by continuous cooling experiments in the range between 960 and 1260°C. A significant delay in the austenite to allotriomorphic ferrite transformation has been demonstrated to occur under practically relevant thermal processing conditions. The effects of prior austenite grain size and soluble niobium have been carefully evaluated and isolated and it has been concluded that the amount of niobium in solution in the austenite is primarily responsible for the retardation. Alternative hypotheses to explain the mechanism whereby niobium exerts this effect on the hardenability of steel are discussed in detail. Soluble niobium reducing the austenite grain boundary energy is argued to be the most convincing explanation of the phenomenon and a reduction of grain boundary energy of 0·286 J m−2 per wt- of soluble niobium content has been proposed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Cambridge Materials Science and Metallurgy, 27 Charles Babbage Road, Cambridge CB3 0FS, UK
References (55)
Show source-provided references
1. Gladman T: ‘The physical metallurgy of microalloyed steels’; 1996, London, IOM Communications.
2. 10.1179/174328409X45329910.1179/174328409X453299 ↗
3. Gray JM · 1973 · 19
4. Rönn L: Niobs inverkan på TTT-diagrammet av ett mjukt stå l, 1963.
5. de Kazinczy F · J. Annaler · 1963 · 147 · 408
6. Fisher GL · Trans. Metall. Soc. AIME · 1969 · 245 · 2405
7. Gray JM: ‘Metallurgy of high-strength low-alloy pipeline steels: present and future possibilities’, Technical Report 7201, Molycorp, 1972.
8. Tanaka T · Int. Met. Rev. · 1981 · 4 · 185
9. Eldis GT · 1977 · 397
10. 10.1179/mst.1992.8.12.105710.1179/mst.1992.8.12.1057 ↗
11. Okaguchi S · 1988 · 1 · 330
12. 10.1007/BF0266979110.1007/BF02669791 ↗
13. Wang L, Parker S, Rose A, West G and Thomson R: ‘Effect of niobium on transformations from austenite to ferrite in low carbon steels’, Proc. 6th Int. Conf. on ‘High strength low alloy steels’, Beijing, China, May–June 2011, The Chinese Society for Metals, 208–212.
14. 10.1016/S0921-5093(99)00325-110.1016/S0921-5093(99)00325-1 ↗
15. 10.1179/03063458279042721710.1179/030634582790427217 ↗
16. 10.1016/0079-6425(85)90004-010.1016/0079-6425(85)90004-0 ↗
17. 10.1016/0921-5093(94)09673-210.1016/0921-5093(94)09673-2 ↗
18. 10.1007/s11661-013-1907-410.1007/s11661-013-1907-4 ↗
19. 10.1007/s11661-997-0197-010.1007/s11661-997-0197-0 ↗
20. 10.2355/isijinternational.41.4610.2355/isijinternational.41.46 ↗
21. DeArdo AJ: ‘Fundamental metallurgy of niobium in steel’, Proc. International Symposium Niobium, 427–500; 2001, Warrendale, PA, AIME-TMS.
22. Yamamoto S · 1981 · 613
23. Kirkwood PR: ‘Niobium and heat-affected zone mythology’, Technical report, http://www.apia.net.au/, 2011.
24. 10.1016/j.actamat.2012.06.01310.1016/j.actamat.2012.06.013 ↗
25. Thomas MH and Michal GM: ‘The influence of niobium and Nb(C,N) precipitation on the formation of proeutectoid ferrite in low alloy steels’, Proc. Int. Conf. on ‘Solid–solid phase transformation’, (ed. Aaronson H I et al.), 469–473; 1981, Farmington, PA, TMS–AIME.
26. 10.1007/BF0111196710.1007/BF01111967 ↗
27. 10.2355/isijinternational1966.22.21410.2355/isijinternational1966.22.214 ↗
28. 10.2320/matertrans1989.35.85910.2320/matertrans1989.35.859 ↗
29. Abe K, Shimizu M, Takashima S and Kaji H: ‘Metallurgical meanings of niobium addition in the formation of acicular ferrite in low carbon steel manufactured by accelerated cooling process’, Proc. Int. Conf. on ‘Physical metallurgy of thermomechanical processing of steels and other metals’, (ed. Tamura I), Vol. 1, 322–329; 1988, Tokyo, Iron and Steel Institute of Japan.
30. Abe T · 1985 · 103
31. Amin RK · 1981 · 377
32. Watanabe H · 1977 · 140
33. Yeo RBG · Trans. Metall. Soc. AIME · 1963 · 227 · 884
34. Tamehiro H, Nishioka K, Murata M, Habu R and Kawada Y: ‘Properties of high toughness X80 line pipe steels’, Proc. Int. Symp. on ‘Accelerated cooling of rolled steel’, 1–8; 1987, Winnipeg, Canada, Canadian Institute of Metals.10.1016/B978-0-08-035770-6.50024-6 ↗
35. Matsuda F · Weld. World · 1996 · 37 · 134
36. 10.1016/S0364-5916(02)00037-810.1016/S0364-5916(02)00037-8 ↗
37. Bhadeshia HKDH · 2013 · 99
38. 10.1016/S1359-6462(99)00025-110.1016/S1359-6462(99)00025-1 ↗
39. 10.1016/0001-6160(62)90092-510.1016/0001-6160(62)90092-5 ↗
40. Hillert M · 1970 · 231
41. 10.1007/BF0264375510.1007/BF02643755 ↗
42. Deardo AJ · 1981 · 685
43. 10.1007/BF0264497910.1007/BF02644979 ↗
44. Stalheim D · Proc. 5th HSLA Steels Conf. Iron Steel Suppl. · 2005 · 40 · 699
45. Day MJ · Trans. ASM · 1940 · 28 · 354
46. 10.1179/174328407X17685710.1179/174328407X176857 ↗
47. 10.1007/BF0280118210.1007/BF02801182 ↗
48. Nordberg H · J. Iron Steel Inst. · 1968 · 206 · 1263
49. NPL: MTDATA. Software, National Physical Laboratory, Teddington, UK, 2006.
50. Christian JW: ‘Theory of transformations in metals and alloys, Part I’, 3rd ed. 2003, Oxford, Pergamon Press.10.1016/S1369-7021(03)00335-3 ↗
51. 10.1016/S1359-6454(96)00392-810.1016/S1359-6454(96)00392-8 ↗
52. Hillert M · J. Annaler · 1957 · 141 · 757
53. 10.1016/0001-6160(56)90041-410.1016/0001-6160(56)90041-4 ↗
54. Bhadeshia HKDH, Svensson L.E and Gretoft B: ‘Theory for allotriomorphic ferrite formation in steel weld deposits’, In, editor, in ‘Welding metallurgy of structural steels’, (ed. Koo J Y), 517–530; 1987, Warrendale, PA, TMS-AIME.
55. University of Cambridge and NPL: Materials Algorithms Project, www.msm.cam.ac.uk/map/mapmain.html, 2013.