journal article·2014-02

Effect of high temperature aging on microstructure and mechanical properties of HR3C heat resistant steel

X. Bai, J. Pan, G. Chen, J. Liu, J. Wang, T. Zhang, W. Tang

Materials Science and Technology· Volume 30· Issue 2
Publisher page

Abstract

Microstructure and mechanical properties of the HR3C austenite heat resistant steel were investigated after artificial aging at 650°C for time up to 3000 h. The results show that as the aging time increased, the room temperature tensile and impact fracture mechanisms of the HR3C steel change from trans- to intergranular fracture. M23C6 type carbides and MX type carbonitrides continuously precipitate during aging, leading to the change of the mechanical properties and fracture mode of the steel. Moreover, the dissolution of the coherent twins and the transformation from the incoherent twins to the thermodynamically stable austenite subgrains have great effects on the mechanical properties of the aged steel, too. When increasing the aging time to ≥2000 h, the microstructure and mechanical properties of the steel are nearly constant, indicating a good thermal stability of the HR3C steel at elevated temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering Hefei University of Technology, Hefei 230009, China

Anhui Institute of Electric Power Science Hefei 230601, China

References (21)

Show source-provided references
1. Sawaragi Y. · Sumitomo Search · 1992 · 48 · 50
2. Sawaragi Y. · Mech. Behav. Mater. · 1991 · 4 · 589
3. Sawaragi Y. · Sumitomo Search · 1994 · 56 · 34
4. Igarashi M. ‘Creep properties of heat resistant steels and super alloys’; 2004, Heidelberg, Springer-Verlag.
5. 10.1016/j.msea.2004.03.00410.1016/j.msea.2004.03.004 ↗
6. 10.1016/j.matchar.2003.09.01210.1016/j.matchar.2003.09.012 ↗
7. 10.1179/174892408X38286010.1179/174892408X382860 ↗
8. 10.1016/j.msea.2009.12.03910.1016/j.msea.2009.12.039 ↗
9. Saito N., and Komai N.: 2007 Proc. ASME Pressure Vessels and Piping Conf.–Proc. 8th Int. Conf. on ‘Creep and fatigue at elevated temperatures–CREEP’, TX: San Antonio, USA, 2007.7, Pressure Vessels & Piping Div, ASME, 211–216.
10. ‘Petroleum and natural gas industries. Calculation of heater-tube thickness in petroleum refineries’, 6th edn, API STD 530:2008, BSI Standards, London, UK.
11. ‘Metallic materials – tensile testing at ambient temperature’, 2nd edn, ISO 6982:1998, ISO, Geneva, Switzerland.
12. ‘Metallic materials – Charpy pendulum impact test. Part 1. Test method’, ISO, Geneva, Switzerland, ISO 148-1:2006.
13. 10.1016/j.pnsc.2012.05.00210.1016/j.pnsc.2012.05.002 ↗
14. 10.3724/SP.J.1037.2010.0084410.3724/SP.J.1037.2010.00844 ↗
15. 10.1016/j.calphad.2010.01.00110.1016/j.calphad.2010.01.001 ↗
16. 10.1016/S0167-577X(02)01378-210.1016/S0167-577X(02)01378-2 ↗
17. 10.1016/S0921-5093(01)01254-010.1016/S0921-5093(01)01254-0 ↗
18. 10.1016/S0254-0584(00)00484-310.1016/S0254-0584(00)00484-3 ↗
19. Yong Q. L. ‘The second phase of steel materials’; 2006, Beijing, Metallurgy Industry Press.
20. Wagner C. · Electrochim. Acta · 1961 · 65 · 581
21. 10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗