journal article·2003-10

Effect of annealing on corrosion behaviour of nitrogen S phase in austenitic stainless steel

X. Y. Li, H. Dong

Materials Science and Technology· Volume 19· Issue 10
Publisher page

Abstract

The corrosion behaviour of both as nitrided and nitrided then annealed 316 austenitic stainless steel has been investigated. Results show that low temperature plasma nitriding can, to some extent, enhance the corrosion resistance of 316 steel, and this can be attributed to the high nitrogen content in the nitrogen S phase layer. However, when annealed at certain conditions, the corrosion resistance of the S phase layer would be impaired. This is mainly because thermodynamically the S phase is a metastable phase, which will decompose into stable chromium nitride and the alpha phase if the kinetic conditions (temperature and time) are favourable. Clearly, the improved corrosion resistance conferred by low temperature plasma nitriding can be retained provided the S phase layer remains untransformed under service conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · GaN-based semiconductor devices and materials · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. BELL T. ZHANG Z. L. LANAGAN J. and STAINES A. M.: in ‘Coatings and surface treatments for corrosion and wear resistance’ (ed. Strafford K. N. et al) 164-177; 1984 Chichester Ellis Horwood.
2. COATES D. J., , MORTIMER B., and HENDRYA A.: COITOS. Sci., 1982, 15, 951 — 972.
3. FLIS J. MANKOWSKI J. and ROLINSKI E.: Surf Eng. 1989 5 151 — 157.10.1179/sur.1989.5.2.151 ↗
4. ZHANG Z. L. and BELL T.: Surf Eng. 1985 1 131–136.10.1179/sur.1985.1.2.131 ↗
5. DEARNLEY P. A. NAMVAR A. HIBBERD G. G. A. and BELL T.: in ‘Plasma surface engineering’ (ed. Broszeit E. et al) Vol. 1 219-226; 1989 Oberursel DGM Informationgesellschaft mbH.
6. ICHII K. FUJIMURA K. and TAKASE T.: Technical Report 27 Kansai University 1986 135–144.
7. LI X. Y. and SUN Y.: in ‘Stainless steel 2000 — thermochemical surface engineering of stainless steel’ (ed. Bell T. and Akamatsu K.) 215–228; 2001 Leeds Maney.
8. LI X. Y.: Surf Eng. 2001 17 147–152.10.1179/026708401101517746 ↗
9. LI X. Y. SUN Y. and BELL T.: Z Metallkd. 1999 90 901–907.10.1515/ijmr-1999-901111 ↗
10. LI X. Y.: PhD thesis, The University of Birmingham, 1999.
11. SEDRIKS A. J.: ‘Corrosion of stainless steels’ 1979 New York Wiley.
12. JACK K. H.: Proc. R. Soc. A, 1951, 208, 200–215.
13. 10.5006/1.329356710.5006/1.3293567 ↗
14. 10.1016/0010-938X(93)90137-610.1016/0010-938X(93)90137-6 ↗
15. R. F. A. JARGELIUS-PETTERSSON. COPTOS. Sci. 1999 41 1639–1664.10.1016/S0010-938X(99)00013-X ↗
16. 10.1016/0010-938X(87)90040-010.1016/0010-938X(87)90040-0 ↗
17. KOLSTER B. H.: HA RDifference, Vol. 1, May 1998, p.3.
18. 10.1023/A:100464742386010.1023/A:1004647423860 ↗
19. SUN Y. and YING C. L.: Proc. 4th Eur. ‘Stainless steel science and market congress’ Vol. 2 285–290; 2002 Paris ATS.
20. MUDALI U. K., , REYNDERS B., and STRATMANN M.: COPTOS. Sci., 1999, 41, 179–189.
21. DILLON C. P.: ‘Corrosion resistance of stainless steels’ 42; 1995 New York Marcel Dekker.