Effects of processing parameters on direct laser sintering of multicomponent Cu based metal powder
Source abstract
Abstract
Direct laser sintering of a multicomponent Cu based metal powder was successfully processed through the mechanism of liquid phase sintering with partial melting of the powder. The effects of processing parameters such as laser power, scan speed, scan line spacing and layer thickness on the densification and microstructural evolution of the laser sintered powder were investigated. It was found that with increasing laser power or decreasing scan speed, the density of the sintered parts increased and the microstructures became denser. However, the combination of higher laser powers (>400 W) and higher scan speeds (≥0·06 ms−1) gave rise to ‘balling’ effect. A successive transition from discontinuous scan tracks to coherently joined ones occurs with decreasing scan line spacing. Lowering the thickness of the powder layer promises an improvement in bonding coherence between sintered layers. A single factor termed ‘energy density by volume’ is defined to evaluate the combined effect of various processing parameters on the density of laser sintered powder. With increasing the energy density by volume up to ∼0·16 kJ mm−3, the densification rate is relatively high. However, with intensifying the energy density over ∼0·23 kJ mm−3, the mechanism of particle bonding may change into full melting/solidification, leading to a decrease in the sintered density.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Agarwala M. · I · 1995 · 1 · 26
2. Das S. · I · 1998 · 4 · 112
3. Simchi A., and Pohl H.: Mater. Set Eng. A, 2003, A359,119–128.10.1016/S0921-5093(03)00341-1 ↗
4. Gu D. D., and Shen Y. F.: Key Eng. Mater., 2006, 315-316, 344.347.10.4028/www.scientific.net/KEM.315-316.344 ↗
5. Simchi A., and Pohl H.: Mater. Set Eng. A, 2004, A383,191–200.10.1016/j.msea.2004.05.070 ↗
6. 10.1016/S0007-8506(07)60790-210.1016/S0007-8506(07)60790-2 ↗
7. Katz Z. · Proc. Inst. Mech. Eng. B · 2001 · B215
8. 10.1023/A:100472001167110.1023/A:1004720011671 ↗
9. 10.1016/S0924-0136(03)00132-810.1016/S0924-0136(03)00132-8 ↗
10. 10.1361/10599490277034371910.1361/105994902770343719 ↗
11. 10.1016/S0924-0136(03)00283-810.1016/S0924-0136(03)00283-8 ↗
12. 10.1243/09544060376255468610.1243/095440603762554686 ↗
13. Tolochko N. · I · 2003 · 9 · 68
14. Zhu H. H., Lu L., and Fuh J. Y. H.: Mater. Set Eng. A, 2004, A371,170–177.10.1016/j.msea.2003.11.048 ↗
15. 10.1016/S0924-0136(03)00766-010.1016/S0924-0136(03)00766-0 ↗
16. Niu H. J. · Ser. Mater · 1999 · 41 · 1229
17. Niu H. J. · Ser. Mater · 1999 · 41 · 25
18. 10.1243/09544050377268058710.1243/095440503772680587 ↗