Effect of processing conditions and heat treatments on mechanical properties of single-crystal superalloy CMSX-2
Source abstract
Abstract
It is shown that the mechanical properties of single-crystal superalloys can be optimized through appropriate solidification conditions and heat treatments. A comparison of the creep behaviour of low- and high-gradient processed single crystals of CMSX-2 alloy shows that minimizing porosity improves the creep strength at intermediate temperatures. The optimum creep resistance is achieved by aligned γ′-precipitates, about 0·5 μm in size. It is shown that in high-cycle fatigue the solidification conditions have a dramatic effect on the fatigue strength. The improvement in fatigue behaviour is attributed to the extremely low density and small size of pores achieved by using a very high-gradient process. The strain–controlled low–cycle fatigue properties of CMSX-2 at intermediate temperatures are also greatly improved by using the high-gradient process. Elimination of porosity in ‘industrial’ single crystals by hot isostatic pressing restores their creep and especially their fatigue performance to the level of the high-gradient solidified material.MST/224
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. HARRIS K. · Paper presented at Fall Meeting, Metallurgical Society of AIME, St Louis, Mo. · 1982
2. 10.1016/0025-5416(83)90199-410.1016/0025-5416(83)90199-4 ↗
3. KRIEGE O. H. · Trans. ASM · 1969 · 62 · 195
4. KEAR B. H. · Trans. AIME · 1967 · 239 · 1209
5. KEAR B. H. · Trans. ASM · 1969 · 62 · 639
6. 10.1016/0036-9748(83)90472-610.1016/0036-9748(83)90472-6 ↗
7. 10.1007/BF0264356910.1007/BF02643569 ↗