journal article·2009-10

Inconsistent wear behaviour of cryotreated tool steels: Role of mode and mechanism

D. Das, A. K. Dutta, K. K. Ray

Materials Science and Technology· Volume 25· Issue 10
Publisher page

Abstract

This report aims to reveal the cause of wide variation in the reported degree of improvement in wear resistance of cryotreated tool steels. Sliding wear tests at different normal loads have been carried out on conventional and cryotreated AISI D2 steel specimens together with SEM examinations and EDX microanalyses of the surfaces and subsurfaces of the worn specimens and that of the generated debris. The obtained results reveal that when the modes and mechanisms of wear are similar for both types of specimens, mild oxidative at lower load or severe delaminative at higher load, the improvement in wear resistance is 1·6–2·2 times. At the intermediate load, the modes and mechanisms are dissimilar, and the observed improvement is as high as 53·2 times. The reported varied degree of improvement in wear resistance by cryotreatment has been attributed to the operating test conditions that govern the modes and mechanisms of wear.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, Howrah, India

Department of Mechanical Engineering, Bengal Engineering and Science University, Shibpur, Howrah, India

Department of Metallurgical and Materials EngineeringIndian Institute of Technology, Kharagpur, India

References (32)

Show source-provided references
1. 10.1016/j.jmatprotec.2006.12.04610.1016/j.jmatprotec.2006.12.046 ↗
2. 10.1080/1042691080193809810.1080/10426910801938098 ↗
3. 10.1016/S0924-0136(01)00973-610.1016/S0924-0136(01)00973-6 ↗
4. 10.1016/0011-2275(82)90085-610.1016/0011-2275(82)90085-6 ↗
5. Collins D. N. · Heat Treat. Met · 1997 · 3 · 71
6. Meng F., Tagashira K., Azuma R., and Sohma H.: ISIJ Int. 1994, 34, 205–210.10.2355/isijinternational.34.205 ↗
7. Pellizzari M., and Molinari A.: Proc. 6th Int. Tooling Conf. on ‘In the Use of Steels: Experience and Research’, (ed.Bergstrom J. et al), 657-669; 2002, Karlstad University, Sweden.
8. 10.1080/1042691070123593410.1080/10426910701235934 ↗
9. 10.1016/S0011-2275(01)00065-010.1016/S0011-2275(01)00065-0 ↗
10. 10.1016/j.vacuum.2005.08.02310.1016/j.vacuum.2005.08.023 ↗
11. Bourne G. R., Sawyer W. G., and Kaufman M. J.: STLE —Annual Meeting 2003, http://nersp.nerdc.ufl.edu/—wsawyer/presentations/cryoSTLE2003.swf; last accessed: July 4, 2008.
12. Zurecki Z.: Proc. 23rd ASM Heat Treating Society Conference, Pennsylvania, USA, September 2005, ASM Proceedings: Heat Treating, (ed.Herring D., and Hill R.), 106-113, 2006.
13. 10.1016/j.cryogenics.2007.10.00210.1016/j.cryogenics.2007.10.002 ↗
14. 10.1016/j.jmatprotec.2006.12.04610.1016/j.jmatprotec.2006.12.046 ↗
15. Yun D. · Heat Treat. Met · 1998 · 3 · 55
16. Rhyim Y. M., Han S. H., Na Y. S., and Lee J. H.: Solid State Phenom. 2006, 118, 9–14.10.4028/www.scientific.net/SSP.118.9 ↗
17. 10.1016/j.msea.2007.07.03510.1016/j.msea.2007.07.035 ↗
18. Mahmudi R. · Heat Treat. Met · 2000 · 69
19. Kelkar R., Nash P., and Thu Y.: Heat Treat Progr. 2007, 7, 57–60.
20. 10.1016/S0921-5093(02)00165-X10.1016/S0921-5093(02)00165-X ↗
21. Lim S. C. · Metall · 1987 · 8
22. 10.1016/S0043-1648(99)00115-510.1016/S0043-1648(99)00115-5 ↗
23. Underwood E. E. ‘Quantitative Stereology’, 1970, Addison-Wesley Publ. Co. Reading, MA.
24. ASTM E 975-00: Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation, ASTM Book of Standards, V 03.01, West Conshohocken, PA, United States, 2004.
25. 10.1007/s11661-000-0211-210.1007/s11661-000-0211-2 ↗
26. ASTM G 99-05: Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM Book of Standards, V 03.02, West Conshohocken, PA, United States, 2005.
27. 10.1007/s11661-004-0303-510.1007/s11661-004-0303-5 ↗
28. Rabinowicz E. ‘Friction and Wear of Materials’, 2nd ed., 124-136; 1995; John Wiley and Sons, New York.
29. 10.1146/annurev.ms.18.080188.00104110.1146/annurev.ms.18.080188.001041 ↗
30. 10.1016/0043-1648(80)90002-210.1016/0043-1648(80)90002-2 ↗
31. 10.1016/0043-1648(77)90081-310.1016/0043-1648(77)90081-3 ↗
32. 10.1002/srin.19980554410.1002/srin.199805544 ↗