Model for grain boundary sliding and its relevance to optimal structural superplasticity Part 1—Theory
Source abstract
Abstract
An assessment of the experimental findings leads to the conclusion that optimal structural superplasticity results from grain/interphase boundary sliding—diffusion coupled flow. An analysis of the boundary sliding process is presented first. By suggesting that both regions I and IIa (lower stress range of region II) of superplastic flow result from sliding—diffusion coupled flow, and—treating mesoscopic (cooperative) boundary sliding as the rate controlling mechanism for optimal superplasticity, the stress, temperature, and grain size dependences of the strain rate of deformation are predicted. The above equation is then related to the stress exponent n (the inverse of the strain rate sensitivity index m). An analysis for determining the true activation energy for the rate controlling process is presented. Expressions for the distribution of internal stresses arising from sliding and the boundary viscosity are derived, and the presence of an initial unsteady region, predicted in an earlier analysis, is shown to be a natural consequence of this approach.MST/3074
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. P. M. HAZZLEDINE: in Proc. 4th Risø Int. Symp. on ‘Metallurgy and materials science’ (ed. J. B. Bilde-Sorensen et al.), Roskilde, Denmark, September 1983, Risø National Laboratory, 27.
2. H. J. FROST and M. F. ASHBY: ‘Deformation mechanism maps: the plasticity and creep of metals and ceramics’, 117–132; 1982, Oxford, Pergamon.
3. K. A. PADMANABHAN: PhD thesis, Cambridge University, 1971.
4. 10.1016/0025-5416(77)90140-910.1016/0025-5416(77)90140-9 ↗
5. 10.1007/BF0056198410.1007/BF00561984 ↗
6. D. S. WILKINSON: in ‘Superplasticity’, (ed. B. Baudelet and M. Suery), 6.1; 1985, Paris, Editions du Centre National de la Recherche Scientifique.
7. P. R. HOWELL, L. K. L. FALK, and G. L. DUNLOP: in Proc. 6th Int. Conf. on ‘Strength of metals and alloys’, (ed. R. C. Gifkins), Melbourne, Australia, August 1982, Australasian Institute of Metals, 695.10.1016/B978-1-4832-8423-1.50114-0 ↗
8. 10.1016/0001-6160(86)90007-610.1016/0001-6160(86)90007-6 ↗
9. 10.1007/978-3-642-81456-310.1007/978-3-642-81456-3 ↗
10. R. C. GIFKINS: in ‘Superplastic forming of structural alloys’, (ed. N. E. Paton and C. H. Hamilton), 3; 1982, Warrendale, PA, TMS AIME.
11. 10.1016/0079-6425(76)90005-010.1016/0079-6425(76)90005-0 ↗
12. 10.1007/BF0055302810.1007/BF00553028 ↗
13. 10.1179/03063458079042613910.1179/030634580790426139 ↗
14. 10.1179/03063458379042072710.1179/030634583790420727 ↗
15. 10.1179/msc.1982.16.10.48310.1179/msc.1982.16.10.483 ↗
16. 10.1016/0001-6160(76)90132-210.1016/0001-6160(76)90132-2 ↗
17. K. A. PADMANABHAN: in Proc. Indo—US Workshop on ‘Interfaces: structure and properties’, (ed. S. Ranganathan et al.), 219; 1993, New Delhi, Oxford and IBH Publishing Co.
18. R. W. CAHN: in ‘Physical metallurgy’, (ed. R. W. Cahn and P. Haasen), 3rd edn, 1596; 1983, Amsterdam, Elsevier.
19. P. R. HOWELL and G. L. DUNLOP: in ‘Creep and fracture of engineering materials and structures’, (ed. B. Wilshire and D. R. J. Owen), 127; 1981, Swansea, Pineridge Press.
20. 10.1016/0036-9748(80)90021-610.1016/0036-9748(80)90021-6 ↗
21. V. S. LEVCHENKO, V. K. PORTNOY, and I. I. NOVIKOV: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 39; 1991, Osaka, The Japan Society of Research on Superplasticity.
22. S. HANADA: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 289; 1991, Osaka, The Japan Society of Research on Superplasticity.
23. T. G. NIEH and J. WADSWORTH: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 339; 1991, Osaka, The Japan Society of Research on Superplasticity.
24. M. MUBUCHI, K. HIGASHI, Y. OKADA, S. TANIMURA, T. IMAI, and K. KUBO: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 385; 1991, Osaka, The Japan Society of Research on Superplasticity.
25. F. WAKAI, Y. KODAMA, N. MURAYAMA, S. SAKAGUCHI, T. ROUXEL, S. SATO, and T. NONAMI: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 205; 1991, Osaka, The Japan Society of Research on Superplasticity.
26. N. FURUSHIRO, T. TANIZAWA, K. AKASHIRO, and S. TAKESHITA: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 245; 1991, Osaka, The Japan Society of Research on Superplasticity.
27. T. G. NIEH and J. WADSWORTH: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 257; 1991, Osaka, The Japan Society of Research on Superplasticity.
28. R. LAPPALAINEN and R. RAJ: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 195; 1991, Osaka, The Japan Society of Research on Superplasticity.
29. R. Z. VALIEV and M. G. ZELIN: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 95; 1991, Osaka, Japan, The Japan Society of Research on Superplasticity.
30. A. W. BOWEN: in ‘Theoretical methods in texture analysis’, (ed. H. J. Bunge), 197; 1987, Oberursel, Germany, Deutsche Gesellschaft fuer Metallkunde.
31. A. W. BOWEN and J. HIRSCH: in Proc. ‘Int. conf. on texture of materials—8’, (ed. J. S. Kallend and G. Gottstein), 549; 1988, Warrendale, PA, TMS.
32. BOWEN A. W. · Wassermann Memorial Conf. · 1988 · 233 · 8
33. J. HIRSCH, K. A. PADMANABHAN, and K. LÜCKE: in Proc. Int. Conf. on Texture of Materials—8, (ed. J. S. Kallend and G. Gottstein), 555; 1988, Warrendale, PA, TMS.10.1155/TSM.8-9.131 ↗
34. 10.1007/BF0114322610.1007/BF01143226 ↗
35. 10.1016/0001-6160(75)90060-710.1016/0001-6160(75)90060-7 ↗
36. 10.1016/0036-9748(76)90141-110.1016/0036-9748(76)90141-1 ↗
37. 10.1016/0001-6160(73)90057-610.1016/0001-6160(73)90057-6 ↗
38. BHATTACHARYA S. S. · Trans. Indian Inst. Met. · 1989 · 42 · S123
39. W. D. NIX: in ‘Superplastic forming’, (ed. S. P. Agrawal), 3; 1985, Materials Park, OH, ASM International.
40. 10.1016/0956-7151(93)90176-S10.1016/0956-7151(93)90176-S ↗
41. K. A. PADMANABHAN and J. SCHLIPF: in Proc. 1st Int. Conf. on ‘Transport phenomena in processing’, (ed. S. I. Guceri), 491; 1993, Lancaster, PA, Technomic Publishing Co.
42. 10.1016/0001-6160(64)90175-010.1016/0001-6160(64)90175-0 ↗
43. 10.1016/0036-9748(78)90162-X10.1016/0036-9748(78)90162-X ↗
44. 10.1016/0001-6160(78)90075-510.1016/0001-6160(78)90075-5 ↗
45. 10.1016/0001-6160(77)90187-010.1016/0001-6160(77)90187-0 ↗
46. 10.1080/1478643770824493910.1080/14786437708244939 ↗
47. 10.1016/0036-9748(78)90311-310.1016/0036-9748(78)90311-3 ↗
48. 10.1016/0036-9748(80)90140-410.1016/0036-9748(80)90140-4 ↗
49. A. P. SUTTON and V. VITEK: in ‘Dislocation modelling of physical systems’, (ed. M. F. Ashby et al.), 549; 1980, Oxford, Pergamon.10.1016/B978-0-08-026724-1.50063-7 ↗
50. 10.1098/rsta.1983.002110.1098/rsta.1983.0021 ↗
51. 10.1016/0036-9748(81)90240-410.1016/0036-9748(81)90240-4 ↗
52. 10.1080/0141861820823621610.1080/01418618208236216 ↗
53. 10.1080/0141861850823757310.1080/01418618508237573 ↗
54. 10.1016/0956-7151(90)90030-K10.1016/0956-7151(90)90030-K ↗
55. P. H. PUMPHREY: in ‘Grain boundary structure and properties’, (ed. G. A. Chadwick and D. A. Smith), 146; 1976, London, Academic Press.
56. 10.1098/rspa.1957.013310.1098/rspa.1957.0133 ↗
57. 10.1016/0001-6160(79)90055-510.1016/0001-6160(79)90055-5 ↗
58. 10.1016/0956-7151(92)90066-N10.1016/0956-7151(92)90066-N ↗
59. S. GLASSTONE, K. J. LAIDLER, and H. EYRING: ‘The theory of rate processes’, 516; 1941, New York, McGraw-Hill.
60. P. SHEWMON: ‘Diffusion in solids’, 2nd edn, 74, 75, 79; 1989, Warrendale, PA, The Minerals, Metals and Materials Society.
61. 10.1016/0025-5416(79)90076-410.1016/0025-5416(79)90076-4 ↗
62. 10.1016/0001-6160(79)90103-210.1016/0001-6160(79)90103-2 ↗
63. 10.1016/0025-5416(78)90192-110.1016/0025-5416(78)90192-1 ↗
64. 10.1016/0025-5416(79)90200-310.1016/0025-5416(79)90200-3 ↗
65. 10.1016/0025-5416(79)90201-510.1016/0025-5416(79)90201-5 ↗
66. 10.1016/0036-9748(81)90334-310.1016/0036-9748(81)90334-3 ↗
67. 10.1007/BF0264547610.1007/BF02645476 ↗
68. 10.1016/0956-7151(93)90029-R10.1016/0956-7151(93)90029-R ↗
69. 10.1016/0921-5093(94)91092-810.1016/0921-5093(94)91092-8 ↗