journal article·1994-06

Hot deformation, dynamic recovery, and recrystallisation behaviour of aluminium 6061–SiCpcomposite

Xiaoxin Xia, P. Sakaris, H. J. McQueen

Materials Science and Technology· Volume 10· Issue 6
Publisher page

Abstract

Hot working and microstructural behaviour of a 15 vol.-%SiC particle reinforced Al 6061 composite is discussed in this paper. The average size of the SiC particles is 18 μm. The hot torsion test temperatures range from 200 to 500°C with strain rates of 0·1, 1·0, and 4 s−1. The equivalent stress versus strain curves show that the Al 6061–SiCp composite has great strengthening behaviour compared with the Al–Mg–Si bulk alloy below 500°C. It is mainly due to the high dislocation density from differential thermal contraction between SiCp and the matrix during cooling and to geometrical constraints around SiC particles during theplastic deformation. The logarithmic maximum stress and reciprocal temperature relationship is non-linear in the temperature range 200–500°C which indicates a complex mechanism. Transmission electron microscopy confirms that the dislocation densityis increased and subgrain size is decreased with an increase in strain rate and decrease of the test temperature. Transmissionelectron microscopy reveals that a number of grains in the matrix of approximately 2–3 μm are highly misoriented, indicatingthat dynamic recrystallisation occurred during deformation. Highly misoriented 200–600 nm crystallites have also beenfound atvarious test temperatures. These are dynamic recrystallisation nuclei. The dynamic recrystallised grains nucleate both in the Almatrix between the SiC particles and at the SiCp/matrix interfaces. Experimental investigations are performed to examine astrain hardening model. The distribution of dynamic recrystallised grains in metal matrix composites fits the computer simulationresults well.MST/2095
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. 10.1007/BF0054444810.1007/BF00544448 ↗
2. H. J. McQUEEN and P. SAKARIS: in 'Composite structures and materials', (ed. S. Hoa and R. Gauvin), 297–306; 1992, London, Elsevier.
3. EDELSON B. I. · Trans. ASM · 1962 · 55 · 230
4. P. SAKARIS and H.J. McQUEEN: in 'Advances in production and fabrication of light metals-CIM', (ed. M. M. Avedesian et al.), 605–617, 1992, Montreal, Canadian Institute of Mining and Metallurgy.
5. H. J. McQUEEN, P. SAICAIUS, and J. BOWLES: in 'Advanced composite materials', (ed. T. Chandra and A. K. Dhingra), 1193–1198; 1993, Warrendale, PA, TMS-AIME.
6. MINORO TAYA and R. J. ARSENAULT: 'Metal matrix composites - thermomechanical behaviour', 1989, Oxford, Pergamon.10.1016/B978-0-08-036984-6.50008-9 ↗
7. P. SAKARIS and H.J. McQUEEN: in 'Aluminium alloys: their physical and mechanical properties (ICAA3)', Vol. 1, (ed. L. Arnberg et al.), 554–559; 1992, Trondheim, Norway, NTH-Sinteff.
8. R. J. ARSENAULT: in 'Strength of metals and alloys', Vol. 2, (ed. D. G. Brandon et al.), 31–46; 1990, London, Freund.
9. D. YU, S. BANDYOPADHYAY, A. P. MOURITZ, and P. R. MUNROE: in 'Composite materials (ICCM9)', (ed. A. Miravete, 363–368; 1993, Madrid, Woodhead Publishing.
10. X. XIA, P. SAKARIS, and H. J. McQUEEN: in 'New materials and ceramics - CIM', (ed. R. A. L. Drew and H. Mostaghaci), 134–145; 1993, Montreal, Canadian Institute of Mining and Metallurgy.
11. X. XIA, P. SAKARIS, and H. J. McQUEEN: in 'Composite materials', (ed. A. Miravete, 157–162; 1993, Madrid, Woodhead Publishing.
12. 10.1520/JTE10554J10.1520/JTE10554J ↗
13. Operators Manual Material Testing System No. 910.30, 1972, Minneapolis, MN, MTS System Corporation.
14. 10.1007/BF0282571110.1007/BF02825711 ↗
15. G. AVRAMOVIC-CINGARA, I. C. SMITH, and H. J. McQUEEN: in 'Dispersion strengthened Al alloys', (ed. Y.W. Kim), 437–450; 1988, Warrendale, PA, TMS-AIME.
16. D. YU and T. CHANDRA: in 'Advanced composites', (ed. T. Chandra and A. K. Dhingra), 1073–1077; 1993, Wollongong, Australia, TMS.
17. 10.1016/0749-6419(91)90035-W10.1016/0749-6419(91)90035-W ↗
18. H. J. McQUEEN and R SAKAIUS: in 'Aluminium alloys: their physical and mechanical properties (ICAA3)', Vol. 2, (ed. L. Arnberg et al.), 179–184; 1992, Trondheim, Norway, NTH-Sinteff.
19. H. J. McQUEEN: in 'Hot deformation of aluminium alloys', (ed. T. G. Langdon and H. D. Merchant), 31–54; 1991, Warrendale, PA, TMS-AIME.
20. H. J. McQUEEN and K. CONROD: in ‘Microstructural control in Al alloy processing', (ed. H. Chia and H. J. McQueen) 197–219; 1991, Warrendale, PA, TMS-AIME.
21. F. R. TIMER, J. T. BEALS, C. DEMETRY, and D. ZHAO: in 'Cast reinforced metal matrix composite', (ed. S. G. Fishman and A. K. Dhingra), 321–325; 1988, Chicago, IL, ASM.