journal article·2006-01

Effects of post-weld heat treatment on microstructure and mechanical properties of friction stir welded joints of 2219-O aluminium alloy

J. C. Feng, Y. C. Chen, H. J. Liu

Materials Science and Technology· Volume 22· Issue 1
Publisher page

Abstract

Post-weld heat treatment (PWHT) of 2219-O aluminium alloy friction stir welding joints was carried out at solution temperatures of 480, 500 and 540°C for 32 min followed by aging at 130°C for 9 h. The effects of PWHT on the microstructure and mechanical properties of the joints were investigated. Experimental results show that PWHT causes coarsening of the grains in the weld, and the coarsening degree increases with increasing solution temperature. The tensile strength of the heat treated joints increases with increasing solution temperature. The maximum tensile strength can reach 260% that of the base material at the solution temperature of 540°C. PWHT has a significant effect on the fracture locations of the joints. When the solution temperature is lower than 500°C, the joints fracture in the base material; when the temperature is higher than 500°C, the joints fracture in the weld. The change of the fracture locations of joints is attributed to the presence of precipitate free zones beside the grain boundaries and coarsening equiaxed grain structures in the weld.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Dawes C. J., and Thomas W. M.: Weld. 1, 1996, 75,41–45.10.1080/00050336.1996.10558599 ↗
2. Dawes M. G., Karger S. A., Dickerson T. L., and Przyoatek J.: Proc. 2nd Int. Symp. on ‘Friction stir welding’, Gothenburg, Sweden, June 2000, TWI Ltd, Paper S2-P1.
3. 10.1016/S0924-0136(03)00806-910.1016/S0924-0136(03)00806-9 ↗
4. 10.1016/S1359-6462(99)00226-210.1016/S1359-6462(99)00226-2 ↗
5. Hashimoto T., Jyogan S., Nakada K., Kim Y. G., and Ushio M.: Proc. 1st Int. Symp. on ‘Friction stir welding’, CA, USA, June 1999, TWI Ltd, Paper 59-P3.
6. 10.1007/s11661-001-1038-110.1007/s11661-001-1038-1 ↗
7. Pao P. S., Lee E., Feng C. R., Jones H. N., and Moon D. W.: Proc. 4th Int. Symp. on ‘Friction stir welding’, UT, USA, May 2003, TWI Ltd, 8.
8. 10.1023/A:102497042108210.1023/A:1024970421082 ↗
9. 10.1016/S1359-6462(97)00093-610.1016/S1359-6462(97)00093-6 ↗
10. 10.1007/s11661-999-0251-110.1007/s11661-999-0251-1 ↗
11. 10.1007/s11661-998-0021-510.1007/s11661-998-0021-5 ↗
12. 10.1016/S0254-0584(02)00604-110.1016/S0254-0584(02)00604-1 ↗
13. Hori H., Makita S., Minamida T., Watanabe S., Anzai E., and Hino H.: Proc. 3rd Int. Symp. on ‘Friction stir welding’, Kobe, Japan, September 2001, TWI Ltd, Paper 55-P2.
14. Juricic C., Donne C. D., and Drebler U.: Proc. 3rd Int. Symp. on ‘Friction stir welding’, Kobe, Japan, September 2001, TWI Ltd, 5.
15. 10.1007/s11661-000-0136-910.1007/s11661-000-0136-9 ↗
16. 10.1007/s11661-998-0021-510.1007/s11661-998-0021-5 ↗
17. Backlund J.: Proc. Conf. TWI, NALCO-7, Cambridge, April 1998, 171.
18. Lindner K., Khandkar Z., Khan J., Tang W., and Reynolds A. P.: Proc. 4th Int. Symp. on ‘Friction stir welding’, UT, USA, May 2003, TWI Ltd, Paper 509A-P2.
19. Kumagai M., Tanaka S., Hatta H., Yoshida H., and Sato H.: Proc. 3rd Int. Symp. on ‘Friction stir welding’, Kobe, Japan, September 2001, Paper 56-P2.
20. 10.1023/A:101370110402910.1023/A:1013701104029 ↗
21. Frigaard Ø., Grong Ø., Hjelen J., Gulbrandsen-dahl S., and Midling O. T.: Proc. 1st Int. Symp. on ‘Friction stir welding’, CA, USA, June 1999, TWI Ltd, Paper S11-P2.
22. 10.1016/S1359-6454(02)00598-010.1016/S1359-6454(02)00598-0 ↗
23. Arbegast W. J., and Hartley P. J.: Proc. 5th Int. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, June 1998, ASM International,541–546.
24. Arbegast W. J.: 13th Annual ‘Advanced aerospace materials and processes’ Conf. and Symp., Orlando, FL, USA, June 2002, ASM International.
25. 10.1016/S1359-6462(02)00257-910.1016/S1359-6462(02)00257-9 ↗
26. Sato Y. S., Watanabe H., Park S. H. C., and Kokawa H.: Proc. 5th Int. Symp. on ‘Friction stir welding’, Metz, France, September 2004, TWI Ltd, Paper 504A-P1.
27. 10.1016/S0921-5093(96)10546-310.1016/S0921-5093(96)10546-3 ↗
28. Nunes A. C.: Weld 1, 1984, 63,27–35.10.1080/05775132.1984.11470914 ↗
29. 10.1179/13621710322500559810.1179/136217103225005598 ↗