journal article·1994-06

Design of surfacein situmetal–ceramic composite formation via laser treatment

T. N. Baker, H. Xin, C. Hu, S. Mridha

Materials Science and Technology· Volume 10· Issue 6
Publisher page

Abstract

The creation of wear resistant surface metal matrix composites in both aluminium alloys and titanium via the incorporation of preplaced SiCp has been successfully undertaken by using a 5 kW CO2 laser. The problems associated with the production of a metal matrix composite layer freefrom porosity, cavities, and cracks, with a satisfactory distribution of ceramic were considered. Optimum laser processing conditionsfor Al–SiCp gave a well distributed ceramic withfew defects, but limited to 35 μm thickness. This was increased to 250 μm using a preplaced mixture of Al powder and SiCp. A prep laced SiCp layer on commercially pure Ti resulted in a dissolution of SiCp and precipitation of TiC, or the partial dissolution of SiCp and agglomeration into a hard layer (1400 HV). Pin on disc wear tests indicated that surfaces could be produced via laser surface melting associated with preplaced SiCp which showed a similar wear resistance to bulk metal matrix composite Al alloy–SiCp, and an improvement of an order of magnitude for commercially pure Ti–SiCp surface metal matrix composites, over a commercially pure Ti laser treated surface.MST/3003
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. 10.1016/0043-1648(84)90069-310.1016/0043-1648(84)90069-3 ↗
2. AYERS J. D. · J. Met. · 1981 · 33 · 19
3. J. D. AYERS: in 'Lasers in metallurgy' (Proc. Conf.), (ed. K. Mukheijee and J. Mazumder), 115; 1981, Warrendale, PA. The Metallurgical Society of AIME.
4. 10.1007/BF0074411010.1007/BF00744110 ↗
5. S. MRTHDA, H. S. UBHI, P. HOLDWAY, T. N. BAKER, and A. W. BOWEN: in 'Proc. of the 7th World Conference on Titanium, Titanium 92', (ed. F. H. Froes and I. Caplan, Science and Technology Vol. III, 2641–2649; 1993, Warrendale, PA, The Minerals, Metals and Materials Society.
6. 10.1016/0001-6160(84)90175-510.1016/0001-6160(84)90175-5 ↗
7. 10.1063/1.35116110.1063/1.351161 ↗
8. 10.1063/1.34318310.1063/1.343183 ↗
9. CROOK A. G. · Metall. · 1989 · 43 · 957
10. 10.1016/0956-7151(93)90369-410.1016/0956-7151(93)90369-4 ↗
11. 10.1016/0956-716X(93)90566-B10.1016/0956-716X(93)90566-B ↗
12. 10.1016/0043-1648(91)90106-510.1016/0043-1648(91)90106-5 ↗
13. HU C. · Adv. Mater. Process.
14. 10.1179/sur.1988.4.2.14110.1179/sur.1988.4.2.141 ↗
15. HU C. · J. Mater. Sci.
16. 10.1007/BF0059148310.1007/BF00591483 ↗
17. BHANSALI K. J. · J. Met. · 1982 · 30
18. 10.1016/0043-1648(88)90026-910.1016/0043-1648(88)90026-9 ↗
19. S. TURENNE, S. CARON, O. WEISS, and J. MASOUNAVE: in 'Fabrication of particulates reinforced metal composites', (ed. J. Masounave and F. G. Hamel), 271; 1990, Materials Park, OH, ASM.
20. A. WANG and H.J. RACK: in 'Metal and ceramic matrix composites: processing, modelling and mechanical behaviour', (ed. R. B. Bhagat et al.), 487; 1990, Warrendale, PA, TMS.
21. 10.1016/0043-1648(91)90073-410.1016/0043-1648(91)90073-4 ↗
22. 10.1179/mst.1994.10.6.51310.1179/mst.1994.10.6.513 ↗
23. 10.2320/matertrans1960.29.92010.2320/matertrans1960.29.920 ↗
24. 10.1016/0043-1648(91)90290-B10.1016/0043-1648(91)90290-B ↗
25. 10.1007/BF0265176110.1007/BF02651761 ↗