journal article·1991-06

Synthesis of nitrogen ceramic povvders by carbothermal reduction and nitridation Part 3 Aluminium nitride

Y. W. Cho, J. A. Charles

Publisher page

Abstract

It has been found that the reaction rate between alumina and carbon in nitrogen can be considerably increased by using Al(OH)3–C mixtures instead of α Al2O3–C mixtures. The C/Al(OH)3 ratio in the starting mixtures should be greater than the stoichiometric ratio to complete the reaction. It was observed that alumina is reduced and nitrided to form aluminium nitride via spinel type aluminium oxynitride which is an intermediate compound. The overall reaction rate increased with decreasing Al(OH)3 particle size and increasing nitrogen flowrate. It is thought that the faster reaction rates obtained from Al(OH)3–C mixtures were derivedfrom the high specific surface area of transition aluminas, such as γ Al2O3, which formed during heating of the samples to the reaction temperature. The particle morphologies of the Al(OH)3 powders did not change during the reduction and nitridation reaction, an important attribute to the process.MST/1346c
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Catalytic Processes in Materials Science · Ammonia Synthesis and Nitrogen Reduction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. WERDECKER W. · Manuf. Technol. · 1984 · 7 · 399
2. KUROICAWA Y. · Manuf. Technol. · 1985 · 8 · 247
3. IWASE N. · Manuf. Technol. · 1985 · 8 · 253
4. KURAMOTO N. · Manuf. Technol. · 1986 · 9 · 386
5. KOLKER H. · Ceram. Forum Int., · 1988 · 65 · 75
6. CHANCHANE R. · Manuf. Technol. · 1988 · 11 · 427
7. KURAMOTO N. · Am. Ceram. Soc. Bull., · 1989 · 68 · 883
8. 10.1111/j.1151-2916.1988.tb05924.x10.1111/j.1151-2916.1988.tb05924.x ↗
9. 10.1149/1.242768610.1149/1.2427686 ↗
10. 10.2109/jcersj.96.73110.2109/jcersj.96.731 ↗
11. 10.1007/BF0072550510.1007/BF00725505 ↗
12. 10.1111/j.1151-2916.1959.tb14066.x10.1111/j.1151-2916.1959.tb14066.x ↗
13. 10.1007/BF0079193210.1007/BF00791932 ↗
14. VISSOKOV G. P. · J. Mater. Sc · 2011 · 1983, 18
15. COLLONGUES R. · Bull. Soc. Chim. Fr., · 1962 · 11/12
16. HOCH M. · Am. Ceram. Soc. Bull., · 1979 · 58 · 187
17. ROCHERULLE J. · Rev. Int. Hautes Temp. Refract., · 1985 · 22 · 83
18. 10.1111/j.1151-2916.1983.tb10021.x10.1111/j.1151-2916.1983.tb10021.x ↗
19. 10.1002/zaac.1959298010610.1002/zaac.19592980106 ↗
20. WIBERG E. · Naturforsch · 1955 · 106 · 229
21. 10.1063/1.165601710.1063/1.1656017 ↗
22. 10.1143/JJAP.24.L79510.1143/JJAP.24.L795 ↗
23. 10.1007/BF0172991810.1007/BF01729918 ↗
24. PARIS R. A. · (Pechiney): US Patent · 1963 · 3 · 455, 4
25. HUANG LI—PING · Res. Inorg. Mater. (Shangai Inst. Ceram · 1983 · 83 · 4
26. KOSOLAPOVA T. YA · Soy. Powder Metall. Met. Ceram., · 1984 · 23 · 82910.1007/BF00792179 ↗
27. SILVERMAN L. D. · Adv. Ceram. Mater., · 1988 · 3 · 41810.1111/j.1551-2916.1988.tb00248.x ↗
28. E. T. TURKDOGAN: ‘Physical chemistry of high temperature technology’, 5; 1980, New York, Academic Press.
29. 10.1007/BF0073094410.1007/BF00730944 ↗
30. 10.1111/j.1151-2916.1981.tb10232.x10.1111/j.1151-2916.1981.tb10232.x ↗
31. 10.1179/mst.1991.7.4.28910.1179/mst.1991.7.4.289 ↗
32. 10.1179/mst.1991.7.5.39910.1179/mst.1991.7.5.399 ↗
33. 10.1016/0022-3697(87)90153-310.1016/0022-3697(87)90153-3 ↗
34. Y. W. cm: PhD thesis, Univeristy of Cambridge, 1990.
35. 10.1021/ie50487a03910.1021/ie50487a039 ↗
36. TERTIAN R. · J. Chim. Phys., · 1958 · 55 · 34110.1051/jcp/1958550341 ↗
37. L. K. HUDSON: ‘Critical reports on applied chemistry’, Vol. 20, ‘Production of aluminium and alumina’, (ed. A. R. Burkin), 32-36; 1987, Chichester, John Wiley.
38. 10.1021/j150334a01610.1021/j150334a016 ↗