journal article·1997-07

Fabrication, microstructures, and tensile properties of magnesium alloy AZ91/SiCpcomposites produced by powder metallurgy

D. M. Lee, B. K. Suh, B. G. Kim, J. S. Lee, C. H. Lee

Materials Science and Technology· Volume 13· Issue 7
Publisher page

Abstract

The tensile properties and microstructural evolution of hot extruded AZ91 magnesium alloy with and without reinforcement of SiC particles have been investigated in terms of extrusion parameters, such as extrusion ratio and extrusion temperature. Also, the effect of SiC particles on the grain size of the matrix in the composites was evaluated using the Hall-Petch equation. The AZ91 magnesium alloy powders prepared by wet attrition milling from magnesium machined chips were hot pressed with and without SiC particles, hot extruded, and then solution treated. Microstructural observation revealed that both the composites and the magnesium alloy have fine equiaxed grains due to the dynamic recrystallisation during hot extrusion. The tensile strength of both materials increased with increasing extrusion ratio, and the strengths of the composites were higher than that of the magnesium alloy without reinforcement. It was found that the tensile strength of both the materials decreased after solution treatment, and the decrease in tensile strength of the composites was considerably smaller than that of the magnesium alloy. From analyses of the microstructures and the mechanical properties, combined with examination of the H all–Petch relationship, the refinement of the matrix was primarily responsible for the improvement in the yield strength of the composites. The grain growth of the matrix was inhibited by the introduction of the SiC particles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. 10.1007/BF0072468410.1007/BF00724684 ↗
2. 10.2464/jilm.40.70310.2464/jilm.40.703 ↗
3. 10.1007/BF0322240710.1007/BF03222407 ↗
4. K. LAUE and H. STENGER: ‘Extrusion’, 30; 1981, Metals Park, OH, American Society for Metals.
5. KIM Y. W. · J. Met., · 1985 · 37 · 27
6. W. JOHNSON and R. MEHL: ‘Fundamentals of physical metal-lurgy’, 348; 1975, Verhoeven, NY, John Wiley and Sons.
7. 10.2464/jilm.45.39110.2464/jilm.45.391 ↗
8. MORIMOTO H. · J. Jpn Inst. Met., · 1994 · 58 · 97310.2320/jinstmet1952.58.8_973 ↗