journal article·1988-03

Cast metal matrix composites

S. J. Harris

Publisher page

Abstract

Metal matrix composites have been available in certain forms for at least two decades, e.g. boron fibre reinforced aluminium and various dispersed phase alloys and cermets. Recently, a range of alumina and silicon carbide fibres, whiskers, and particles with diameters <20 μm have become available. The possibilities of incorporating these materials into metals to improve stiffness, wear resistance, and elevated temperature strength without incurring weight penalties have attracted the attention of design engineers in the aerospace and automobile industries. The aim of the present paper is to outline the manufacturing processes for such composites, in particular those based upon liquid metal technology, e.g. squeeze casting and spray forming. Some of the mechanical and physical properties which have been determined for these materials are described. An analysis of how matrix alloy selection may influence tensile and fracture behaviour of short fibre and particle reinforced composites is attempted. MST/770
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Composite Material Mechanics · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. KREIDER K. G. and PREWO K. M.: in ‘Composite materials’ Vol. 4 (ed. Broutman L. J. and Krock R. H. ) 400-480; 1974 New York Academic Press.
2. CHAMPION A. R. KRUEGER W. H. HARTMANN H. S. and DHINGRA A. K.: in Proc. Second Int. Conf. on ‘Composite materials’ ‘ICCM II’ (ed. Noton B. et al.) 882–904; 1978 New York AIME.
3. AM Y. HORIKIRI S. FUJIMURA K. and E. ICHIKE in Proc. Fourth Int. Conf. on ‘Composite materials’ ICCM IV’ (ed. T. Hayashi et al.) 1427-1484; 1982 Tokyo Japan Society for Composite Materials.
4. PAMINGTON D. (ed.): ‘Carbon fibre directory’: 1983 Slough Berks. Pammac Directories.
5. TANAKA J. ICHIKAWA H. HAYASE T. OKAMURA K. and MATSUZAWA T.: in Proc. Fourth Int. Conf. On ‘Composite materials’ (ICCM IV) (ed. Hayashi T. et al.) 1407–1413; 1982 Tokyo Japan Society for Composite Materials.
6. FITZER E. and JACOBSEN G.: in Proc. Fourth Int. Conf. On ‘Composite materials’ ICCM IV) (ed. Hayashi T. et al.) 1315–1322; 1982 Tokyo Japan Society for Composite Materials.
7. DINWOODIE J. MOORE E. LANGMAN C. A. J. and SYMES W. R.: in Proc. Fifth Int. Conf. on ‘Composite materials’ ICCM V’ (ed. W. C. Harrigan Jr et al.) 671-685; 1985 New York AIME.
8. 10.1179/imtr.1985.30.1.27510.1179/imtr.1985.30.1.275 ↗
9. WHITE J. HUGHES I. R. WILLIS T. C. and JORDAN R. M.: in ‘4th international Al—Li conference’ (ed. Champier G. et al.) 347-353; 1987 Paris Societe Franyaise de Metallurgic.
10. FEEST E. A. BALL M. J. BEGG A. R. and BIGGS D. A.: in ‘Metal matrix composites developments in Japan’; 1986 Harwell Oxon. UKAEA.
11. GODDARD D. M.: in Report No. ATR-77, 8162-3, The Aerospace Corporation, El Segundo, CA, 1977.
12. CLYNE T. W. and BADER M. G.: in Proc. Fifth Int. Conf. on ‘Composite materials’ ICCM V’ (ed. W. C. Harrigan Jr et al.) 755–771; 1985 Philadelphia PA AIME.
13. CLEGG A. J.: in ‘Aluminium technology ‘86’ (ed. Sheppard T. Paper 89 Synopsis p. 731; 1986 London The Institute of Metals.
14. CORNIE J. A. MORTENSEN A. GUNGOR M. and FLEMINGS M. C.: in Proc. Fifth Int. Conf. on ‘Composite materials’ ICCM V’ (ed. W. C. Harrigan Jr et al.) 809-823; 1985 New York AIME.
15. LEVI G. G. ABBASHCHIAN G. J. and MEHRABIAN R.: in Proc. Workshop on ‘Rheocasting’ 41-54; 1978 Columbus OH Battelle.
16. 10.1179/03063457579044444110.1179/030634575790444441 ↗
17. 10.1016/0015-0568(72)90017-610.1016/0015-0568(72)90017-6 ↗
18. HARRIS S. J. and MARSDEN A. L.: in Proc. Conf. on ‘Practical metallic composites’ B35—B42; 1974 London The Institution of Metallurgists.
19. DONOMOTO T. FUNATANI K. MIURA N. and MIYAKE N.: ‘Ceramic fibre reinforced piston for high performance diesel engines’ paper no. 830252 Society of Automotive Engineers Warrandale PA 1983.10.4271/830252 ↗
20. HACK J. E., , PAGE R. A., , and LEVERANT G. R.: Metall. Trans. A, 1984, 15, 1389-1396, 1397–1405.
21. WOLF E. G., , MIN B. K., , and KURAL M. H.: J. Mater. Sci., 20, 1985, 1141-1149.
22. HARRIS S. J. and WILKS T. E.: in ‘Developments in the science and technology of composite materials’ (ed. Bunsell A. R. et al.) 595–603; 1985 Bordeaux CODEMAC.
23. NOBLE B., , HARRIS S. J., , and DINSDALE K.: J. Mater. Sci., 1982, 17, 461.
24. CAPPLEMAN G. R., , WATTS J. F., , and CLYNE T. W.: J. Mater. Sci., 1985, 20, 2159-2168.
25. 10.1007/BF0281167910.1007/BF02811679 ↗
26. DOORBAR P. J.: personal communication, Rolls-Royce plc, Derby, 1986.
27. DAIMARU A. and TAVA M.: in Proc. Fourth Int. Conf. on ‘Composite materials’ ICCM IV) (ed. T. Hayashi et al.) 199; 1982 Tokyo Japan Society for Composite Materials.
28. ESHELBY J. D.: Proc. Roy. Soc., 1975, A241, 376.
29. HARRIS S. J. and WILKS T. E.: in ‘Fibre reinforced composites 1986’ 19-28; 1986 London The Institute of Mechanical Engineers.
30. HARRIS S. J. and wmics T. E.: in Proc. Sixth Int. Conf. on ‘Composite materials’ ICCM VI’ London July 1987 European Association for Composite Materials and Centre for Composite Materials Imperial College of Science and Technology.
31. WILLIAMS D. R. and FINE M. E.: in Proc. Fifth Int. Conf. on ‘Composite materials’ ICCM V’ (ed. W. C. Harrigan Jr et al.) 639–670; 1985 New York AIME.