Effect of laser energy density on the microstructure and performance of homogeneous-material laser cladding repair layers for TA15 titanium alloy
Source abstract
Abstract
This study employs homogeneous material laser cladding to fabricate a metallurgically bonded repair layer compositionally identical to the TA15 substrate. The microstructure and phase composition were characterized using XRD, SEM, EBSD, and XPS, while electrochemical and wear tests were performed to evaluate performance. The results show that ultrafast solidification produces a fine acicular microstructure with refined grains and reduced BCC phase content. At the optimal energy density (S2, 31.3 J/mm 3 ), the repair layer exhibits a microhardness of 455 ± 6 HV, representing a 41% increase over the substrate, and achieves a wear rate as low as 2.61 × 10 − 4 mm 3 /N·m. XPS analysis confirms that grain refinement promotes the formation of a dense TiO 2 -based oxide film, which effectively suppresses Cl − ion penetration, leading to a low corrosion current density of 1.81 ± 0.06 × 10 − 2 μA/cm 2 . These findings demonstrate that compositionally matched laser cladding not only enhances wear and corrosion resistance but also provides a reliable strategy for additive remanufacturing of critical titanium alloy components.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shenyang University of Technology
Wuzhou University
Chinese Academy of Sciences
Shenyang Dalu Laser Technology Co, LTD, Shenyang, PR China
Funding
National Key Research and Development Program of China · Strategic Priority Research Program of the Chinese Academy of Science · General Project of Guangxi Natural Science Foundation · Natural Science Foundation of Liaoning Province
References (74)
Show source-provided references
1. 10.1016/j.msea.2019.13882610.1016/j.msea.2019.138826 ↗
2. 10.1016/j.vacuum.2022.11130310.1016/j.vacuum.2022.111303 ↗
3. 10.1016/j.msea.2015.01.07310.1016/j.msea.2015.01.073 ↗
4. Tao J, Ji L, Hu S. An investigation of the small fatigue crack growth behavior in Ti-6.5Al-2Zr-1Mo-1 V alloy. Elsevier 2017; 695: 2764–2772.
5. 10.1016/j.engfailanal.2015.11.00810.1016/j.engfailanal.2015.11.008 ↗
6. 10.1016/j.engfailanal.2019.01.05410.1016/j.engfailanal.2019.01.054 ↗
7. 10.3390/met1006070510.3390/met10060705 ↗
8. 10.1108/1355254061070701310.1108/13552540610707013 ↗
9. 10.1016/j.optlastec.2016.02.01310.1016/j.optlastec.2016.02.013 ↗
10. Aprilia A, Wu N, Zhou W. Repair and restoration of engineering components by laser directed energy deposition. Mater Today Proc 2022; 70: 6.
11. 10.1016/j.jmst.2016.09.02610.1016/j.jmst.2016.09.026 ↗
12. 10.1016/j.jclepro.2016.06.04910.1016/j.jclepro.2016.06.049 ↗
13. 10.1016/j.ceramint.2020.09.06310.1016/j.ceramint.2020.09.063 ↗
14. 10.1016/j.optlastec.2020.10661910.1016/j.optlastec.2020.106619 ↗
15. 10.1007/s00170-019-04851-310.1007/s00170-019-04851-3 ↗
16. 10.1016/j.optlastec.2016.12.03810.1016/j.optlastec.2016.12.038 ↗
17. 10.1016/j.jmatprotec.2021.11711710.1016/j.jmatprotec.2021.117117 ↗
18. 10.1016/j.phpro.2011.03.04110.1016/j.phpro.2011.03.041 ↗
19. 10.1016/j.jallcom.2020.15424310.1016/j.jallcom.2020.154243 ↗
20. 10.1016/j.jeurceramsoc.2019.10.03710.1016/j.jeurceramsoc.2019.10.037 ↗
21. 10.1080/17515831.2020.172038010.1080/17515831.2020.1720380 ↗
22. 10.1016/j.surfcoat.2020.12594410.1016/j.surfcoat.2020.125944 ↗
23. 10.1016/j.optlastec.2017.10.01510.1016/j.optlastec.2017.10.015 ↗
24. 10.1016/j.jmst.2020.10.04410.1016/j.jmst.2020.10.044 ↗
25. 10.1016/j.corsci.2019.03.02710.1016/j.corsci.2019.03.027 ↗
26. 10.1016/j.ceramint.2023.08.03110.1016/j.ceramint.2023.08.031 ↗
27. 10.1016/j.ceramint.2024.04.39910.1016/j.ceramint.2024.04.399 ↗
28. 10.1016/j.triboint.2007.11.00310.1016/j.triboint.2007.11.003 ↗
29. 10.1016/S0043-1648(01)00818-310.1016/S0043-1648(01)00818-3 ↗
30. 10.1016/j.jmapro.2024.11.03910.1016/j.jmapro.2024.11.039 ↗
31. 10.1016/j.matdes.2020.10884610.1016/j.matdes.2020.108846 ↗
32. 10.1016/j.addma.2018.02.00910.1016/j.addma.2018.02.009 ↗
33. 10.3390/met909097210.3390/met9090972 ↗
34. 10.1016/j.ceramint.2021.11.29910.1016/j.ceramint.2021.11.299 ↗
35. 10.1016/j.optlastec.2018.10.02510.1016/j.optlastec.2018.10.025 ↗
36. 10.1016/j.jallcom.2012.07.02210.1016/j.jallcom.2012.07.022 ↗
37. 10.3390/met1206098610.3390/met12060986 ↗
38. 10.1016/j.ultramic.2009.04.00710.1016/j.ultramic.2009.04.007 ↗
39. 10.1016/j.msea.2019.06.00110.1016/j.msea.2019.06.001 ↗
40. 10.1016/j.corsci.2024.11254210.1016/j.corsci.2024.112542 ↗
41. 10.1016/j.matdes.2016.06.11710.1016/j.matdes.2016.06.117 ↗
42. 10.1016/j.msea.2014.07.08610.1016/j.msea.2014.07.086 ↗
43. 10.1016/j.actamat.2014.11.02810.1016/j.actamat.2014.11.028 ↗
44. Koepf JA, Gotterbarm MR, Kumara C, et al. Alternative approach to modeling of nucleation and remelting in powder bed fusion additive manufacturing. Addit Eng Mater 2023; 25(12).
45. 10.1016/j.mtcomm.2025.11258810.1016/j.mtcomm.2025.112588 ↗
46. 10.1016/j.optlastec.2019.05.00610.1016/j.optlastec.2019.05.006 ↗
47. 10.1016/j.jmrt.2024.05.04910.1016/j.jmrt.2024.05.049 ↗
48. 10.1016/j.ijrmhm.2025.10704810.1016/j.ijrmhm.2025.107048 ↗
49. Wu H, Wang MS, Zhang S, et al. Cavitation erosion performance and damage mechanism of FeNiCoCrMo0.3Nb0.5 hypoeutectic high entropy alloy coatings. Wear 2025; 572: 572–573.
50. 10.1016/j.ceramint.2022.03.01010.1016/j.ceramint.2022.03.010 ↗
51. 10.1016/j.jallcom.2018.02.25110.1016/j.jallcom.2018.02.251 ↗
52. 10.1016/j.addma.2019.05.01510.1016/j.addma.2019.05.015 ↗
53. 10.1016/j.ijfatigue.2025.10930310.1016/j.ijfatigue.2025.109303 ↗
54. 10.1016/j.surfcoat.2025.13235810.1016/j.surfcoat.2025.132358 ↗
55. 10.1016/j.corsci.2017.05.00310.1016/j.corsci.2017.05.003 ↗
56. 10.1002/slct.20250095110.1002/slct.202500951 ↗
57. 10.1177/0267084425133691310.1177/02670844251336913 ↗
58. 10.1016/j.istruc.2025.11018410.1016/j.istruc.2025.110184 ↗
59. 10.1016/j.wear.2010.09.00410.1016/j.wear.2010.09.004 ↗
60. 10.1016/j.mtcomm.2020.10142910.1016/j.mtcomm.2020.101429 ↗
61. 10.1016/j.corsci.2022.11033310.1016/j.corsci.2022.110333 ↗
62. 10.1016/j.ijleo.2023.17105510.1016/j.ijleo.2023.171055 ↗
63. 10.1016/j.matchar.2025.11556210.1016/j.matchar.2025.115562 ↗
64. 10.1088/1402-4896/ad710510.1088/1402-4896/ad7105 ↗
65. 10.1016/j.actamat.2023.11952610.1016/j.actamat.2023.119526 ↗
66. 10.1016/j.matchemphys.2025.13155010.1016/j.matchemphys.2025.131550 ↗
67. 10.1016/j.mtcomm.2025.11160410.1016/j.mtcomm.2025.111604 ↗
68. 10.1016/j.jallcom.2022.16388610.1016/j.jallcom.2022.163886 ↗
69. 10.1016/S0043-1648(03)00524-610.1016/S0043-1648(03)00524-6 ↗
70. 10.1016/j.matpr.2021.03.47510.1016/j.matpr.2021.03.475 ↗
71. 10.1016/j.vacuum.2020.10920610.1016/j.vacuum.2020.109206 ↗
72. 10.1016/j.surfcoat.2010.08.07910.1016/j.surfcoat.2010.08.079 ↗
73. 10.1016/j.mtcomm.2025.11180210.1016/j.mtcomm.2025.111802 ↗
74. 10.1016/j.mtcomm.2024.11135310.1016/j.mtcomm.2024.111353 ↗