Development of novel nano-B 4 C and CNF reinforced aluminium matrix hybrid nanocomposite
Source abstract
Abstract
A novel hybrid aluminium-based nano-B 4 C and carbon nanofibers (CNF) reinforced nanocomposite has been developed using powder metallurgy. The microstructure and mechanical properties have been evaluated using field emission scanning electron microscopy, transmission electron microscopy, hardness, and compression testing. The microstructural analysis reveals that the nano-B 4 C and CNF are dispersed in the aluminium matrix, resulting fine-grained structure. The 2 vol% hybrid nanocomposite shows a 182.9% increase in compressive strength, while the 4 vol% nano-B 4 C composite achieves the highest hardness, 62.18% greater than pure aluminium. Tribological tests using a dry sliding pin-on-disc indicate a 53.2% reduction in wear rate for the 2 vol% hybrid nanocomposites. These findings highlight the potential application of this material in the automotive and aerospace industries, where enhanced strength and wear resistance are crucial.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Institute of Technology Durgapur
CSIR-Central Mechanical Engineering Research Institute
References (42)
Show source-provided references
1. Chow GM, Noskova NI (eds). Nanostructured materials: science & technology. St. Petersburg, Russia: Springer Science & Business Media, 2012.
2. 10.1080/02670836.2022.213794910.1080/02670836.2022.2137949 ↗
3. 10.1007/s12633-023-02347-010.1007/s12633-023-02347-0 ↗
4. 10.1016/j.polymdegradstab.2005.05.01810.1016/j.polymdegradstab.2005.05.018 ↗
5. 10.1016/j.compositesb.2015.03.01410.1016/j.compositesb.2015.03.014 ↗
6. 10.2320/matertrans1989.32.110.2320/matertrans1989.32.1 ↗
7. 10.1016/j.surfin.2017.05.00710.1016/j.surfin.2017.05.007 ↗
8. 10.1080/00084433.2024.230604710.1080/00084433.2024.2306047 ↗
9. 10.1016/j.jallcom.2012.07.02910.1016/j.jallcom.2012.07.029 ↗
10. 10.1179/imtr.1985.30.1.27510.1179/imtr.1985.30.1.275 ↗
11. 10.1016/j.jallcom.2017.06.30910.1016/j.jallcom.2017.06.309 ↗
12. 10.3390/met1208132910.3390/met12081329 ↗
13. 10.1088/2053-1591/ad301110.1088/2053-1591/ad3011 ↗
14. 10.1557/jmr.2019.24210.1557/jmr.2019.242 ↗
15. 10.4028/www.scientific.net/AMM.813-814.62010.4028/www.scientific.net/AMM.813-814.620 ↗
16. 10.1007/s40195-018-0811-810.1007/s40195-018-0811-8 ↗
17. 10.1016/j.jeurceramsoc.2011.05.01110.1016/j.jeurceramsoc.2011.05.011 ↗
18. 10.1016/j.msea.2015.01.02010.1016/j.msea.2015.01.020 ↗
19. 10.2298/SOS2202125O10.2298/SOS2202125O ↗
20. 10.1016/j.matpr.2017.01.13010.1016/j.matpr.2017.01.130 ↗
21. 10.1016/j.jallcom.2016.12.14610.1016/j.jallcom.2016.12.146 ↗
22. 10.1016/j.carbon.2018.01.03710.1016/j.carbon.2018.01.037 ↗
23. Panda A, Dobránsky J, Jančík M, et al. Advantages and effectiveness of the powder metallurgy in manufacturing technologies. Metalurgija 2018; 57: 353–356.
24. 10.1007/s11106-017-9896-210.1007/s11106-017-9896-2 ↗
25. 10.1016/j.powtec.2018.09.07510.1016/j.powtec.2018.09.075 ↗
26. 10.1016/j.apt.2021.08.03110.1016/j.apt.2021.08.031 ↗
27. Luecke WE Ma L Graham SM et al. Repeatability and reproducibility of compression strength measurements conducted according to ASTM E9. 2010 Sep 1.
28. Aksulu M, Palabiyik M. Uncertainty of wear rate and coefficient of friction for a polymer wear experiment in a pad-on disc tribotester. Eng Syst Des Anal 2008; 48371: 451–456.
29. Biswas P, Mondal MK. Evaluation of a cast Al-Mg2Si composite for automobile disk-brake rotor application. J Mater Eng Perform 2023: 1–26. https://doi.org/10.1007/s11665-023-08760-1
30. 10.1016/j.jmrt.2013.11.00210.1016/j.jmrt.2013.11.002 ↗
31. 10.1016/j.compositesb.2019.10696510.1016/j.compositesb.2019.106965 ↗
32. Kim KT, Eckert J, Menzel SB, et al. Grain refinement assisted strengthening of carbon nanotube reinforced copper matrix nanocomposites. Appl Phys Lett 2008; 92. https://doi.org/10.1063/1.2899939
33. 10.1016/j.pmatsci.2017.07.00710.1016/j.pmatsci.2017.07.007 ↗
34. 10.1088/2053-1591/ab70e110.1088/2053-1591/ab70e1 ↗
35. 10.1166/jnn.2011.386610.1166/jnn.2011.3866 ↗
36. 10.1111/j.1151-2916.2002.tb00260.x10.1111/j.1151-2916.2002.tb00260.x ↗
37. 10.25130/tjes.24.3.0710.25130/tjes.24.3.07 ↗
38. 10.1016/j.msea.2017.07.03110.1016/j.msea.2017.07.031 ↗
39. 10.1007/s11661-013-2044-910.1007/s11661-013-2044-9 ↗
40. 10.1016/0043-1648(94)90354-910.1016/0043-1648(94)90354-9 ↗
41. 10.1016/j.matpr.2018.04.10010.1016/j.matpr.2018.04.100 ↗
42. 10.1063/1.315836010.1063/1.3158360 ↗