journal article·2026-01Open access

Tensile and shear behavior of recycled AA 6060 aluminium chips by direct hot extrusion

Thomas Corre, Jason Perrin, Johannes Gebhard, Théo Duchateau, Lola Lilensten, Mathilde Laurent-Brocq, A. Erman Tekkaya, Bertrand Huneau

Materials Science and Technology· Volume 42· Issue 1

Abstract

Solid state recycling of aluminium chips is a promising technique to reduce environmental impacts of secondary production. As the recycling process induces a highly oriented microstructure, this study aims to quantify the mechanical properties of extrudates and identify the role of chip boundaries in the fracture behavior. Tensile and shear tests are performed on heat treated AA 6060 alloy and analyzed using digital image correlation. The tensile behavior of the chip-based material is similar to its cast-based counterpart, reaching a yield strength of 230 MPa. Shear properties are close for small deformations, although the chip-based material have lower ductility due to the early onset of damage at the chip boundary. These results confirm the industrial relevance of this process for large scale recycling of aluminium.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bauxite Residue and Utilization · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nantes Université, Ecole Centrale Nantes, CNRS, GeM, UMR 6183, Nantes, France

Institute of Forming Technology and Lightweight Components, TU Dortmund University, Dortmund, Germany

Univ. Paris Est Creteil, CNRS, ICMPE, UMR 7182, Thiais, France

Chimie ParisTech, PSL University, CNRS, Institut de Recherche de Chimie Paris, Paris, France

References (25)

Show source-provided references
1. 10.1016/j.pmatsci.2022.10094710.1016/j.pmatsci.2022.100947 ↗
2. IEA. Co2 emissions in 2022. IEA Paris France 2022.
3. 10.1007/s11837-010-0026-610.1007/s11837-010-0026-6 ↗
4. 10.1016/j.cirp.2015.04.05110.1016/j.cirp.2015.04.051 ↗
5. 10.1016/S0924-0136(00)00634-810.1016/S0924-0136(00)00634-8 ↗
6. 10.3390/su15141143410.3390/su151411434 ↗
7. 10.1016/j.jmatprotec.2023.11808010.1016/j.jmatprotec.2023.118080 ↗
8. 10.1016/j.mtla.2023.10193810.1016/j.mtla.2023.101938 ↗
9. 10.1016/j.jmatprotec.2008.07.04710.1016/j.jmatprotec.2008.07.047 ↗
10. 10.1016/j.msea.2013.03.01010.1016/j.msea.2013.03.010 ↗
11. 10.1016/j.jmatprotec.2019.11629410.1016/j.jmatprotec.2019.116294 ↗
12. Rady MH, Mustapa MS, Wagiman A, et al. Effect of the heat treatment on mechanical and physical properties of direct recycled aluminium alloy (aa6061). Int J Integr Eng 2020; 12: 82–89.
13. 10.1007/s40684-021-00395-810.1007/s40684-021-00395-8 ↗
14. 10.1016/j.jmatprotec.2014.04.01810.1016/j.jmatprotec.2014.04.018 ↗
15. 10.1016/j.mtla.2023.10186410.1016/j.mtla.2023.101864 ↗
16. 10.3390/ma1215237210.3390/ma12152372 ↗
17. Develay R. Traitements thermiques des alliages d’aluminium. 1986. DOI: 10.51257/a-v1-m1290.10.51257/a-v1-m1290 ↗
18. 10.1016/j.actamat.2012.07.04710.1016/j.actamat.2012.07.047 ↗
19. 10.3390/met805030910.3390/met8050309 ↗
20. Réthoré J. Ufreckles. 2018. DOI:https://doi.org/10.5281/zenodo.1433776. https://doi.org/10.5281/zenodo.1433776.
21. 10.1007/s11340-006-9824-810.1007/s11340-006-9824-8 ↗
22. 10.1016/S0022-5096(02)00102-310.1016/S0022-5096(02)00102-3 ↗
23. 10.1016/0001-6160(79)90209-810.1016/0001-6160(79)90209-8 ↗
24. 10.1016/j.ijmecsci.2021.10666010.1016/j.ijmecsci.2021.106660 ↗
25. 10.1179/imtlr.1972.17.1.110.1179/imtlr.1972.17.1.1 ↗