Investigation on thermo-mechanical processing and intergranular corrosion of TP347H stainless steel
Source abstract
Abstract
The grain boundary character distributions of TP347H stainless steel after different thermo-mechanical processes in terms of grain boundary engineering (GBE) were investigated by EBSD. DL-EPR and electrolytic oxalic acid etch tests were carried out to evaluate the improvement of GBE treatment on intergranular corrosion. The low-Σ CSL grain boundary proportion of the TP347H can be increased to about 90% through a single-step thermo-mechanical treatment consisted of a slight tensile deformation (3%) and subsequent annealing process at 1150°C for 1 h. Compared with conventional TP347H, the optimum GBE microstructure suppressed intergranular corrosion due to the high proportion of low-Σ CSL grain boundaries, particularly the twin (Σ3) boundaries which is almost immune to intergranular corrosion.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing, People's Republic of China
Department of Civil Engineering, Mirpur University of Science and Technology, Mirpur AJK, Pakistan
Funding
Fundamental Research Funds for the Central Universities · National Key Research and Development Program of China
References (33)
Show source-provided references
1. Teranishi H · Sumitomo Search · 1989 · 38 · 63
2. 10.1016/j.engfailanal.2020.10515410.1016/j.engfailanal.2020.105154 ↗
3. 10.4028/www.scientific.net/KEM.727.2210.4028/www.scientific.net/KEM.727.22 ↗
4. 10.1179/02670830110150897210.1179/026708301101508972 ↗
5. 10.1021/acs.energyfuels.8b0123210.1021/acs.energyfuels.8b01232 ↗
6. 10.1002/maco.20140794810.1002/maco.201407948 ↗
7. 10.2355/isijinternational.ISIJINT-2015-72110.2355/isijinternational.ISIJINT-2015-721 ↗
8. 10.1016/j.matchar.2007.05.01710.1016/j.matchar.2007.05.017 ↗
9. 10.1016/S1044-5803(01)00125-510.1016/S1044-5803(01)00125-5 ↗
10. 10.1016/j.corsci.2014.03.01210.1016/j.corsci.2014.03.012 ↗
11. 10.1016/j.corsci.2016.02.01910.1016/j.corsci.2016.02.019 ↗
12. 10.1016/j.actamat.2015.08.07510.1016/j.actamat.2015.08.075 ↗
13. 10.1016/j.msea.2003.12.01710.1016/j.msea.2003.12.017 ↗
14. 10.1007/BF0265029210.1007/BF02650292 ↗
15. 10.1016/S1359-6454(98)00322-X10.1016/S1359-6454(98)00322-X ↗
16. 10.1023/A:100484441174410.1023/A:1004844411744 ↗
17. Watanabe T. · Res Mech · 1984 · 11 · 47
18. 10.1016/j.actamat.2004.05.03110.1016/j.actamat.2004.05.031 ↗
19. 10.1016/j.matlet.2014.06.16610.1016/j.matlet.2014.06.166 ↗
20. 10.1007/s11837-998-0248-z10.1007/s11837-998-0248-z ↗
21. 10.1016/j.jnucmat.2017.10.00410.1016/j.jnucmat.2017.10.004 ↗
22. 10.1016/j.actamat.2006.06.03010.1016/j.actamat.2006.06.030 ↗
23. 10.1016/j.matlet.2018.09.11110.1016/j.matlet.2018.09.111 ↗
24. 10.1016/j.msea.2007.09.07510.1016/j.msea.2007.09.075 ↗
25. 10.1016/j.actamat.2006.05.03510.1016/j.actamat.2006.05.035 ↗
26. 10.1016/j.jnucmat.2011.06.01710.1016/j.jnucmat.2011.06.017 ↗
27. 10.1016/j.jnucmat.2017.07.05310.1016/j.jnucmat.2017.07.053 ↗
28. 10.1016/0001-6160(66)90168-410.1016/0001-6160(66)90168-4 ↗
29. 10.1016/j.matchar.2017.09.02610.1016/j.matchar.2017.09.026 ↗
30. 10.1016/j.actamat.2016.03.00210.1016/j.actamat.2016.03.002 ↗
31. Xing XG. · 2015
32. 10.1016/S0378-7753(99)00015-410.1016/S0378-7753(99)00015-4 ↗
33. 10.1016/S1359-6454(01)00064-710.1016/S1359-6454(01)00064-7 ↗