journal article·2012-02

Assessment of intermetallic compound formation during solidification of Al–Si piston alloys through thermal analysis technique

S G Shabestari, R Gholizadeh

Materials Science and Technology· Volume 28· Issue 2
Publisher page

Abstract

Multicomponent Al–Si–Ni–Cu–Mg alloys are widely used as automotive piston materials. The aim of the present work is to study the complicated formation of different intermetallic compounds during the solidification of two types of piston alloys: LM13 alloy with 0·9Ni–0·9Cu–1Mg and 3HA alloy containing 2·6Ni–3Cu–0·2Mg. Solidification events were detected by three-thermocouple thermal analysis technique, and microstructure evaluations were carried out using optical microscopy, scanning electron microscopy, energy dispersive X-ray analysis and quantitative image analysis. In addition to the (Al)+(Si) eutectic reaction, the results show a complicated precipitation of different post-eutectic phases, the most important of which are Al9FeNi, Al3Ni, Al3CuNi and Mg2Si. Ni rich Al9FeNi and Al3Ni phases have the highest formation temperatures among other intermetallics, which are detected in the range of 553–558°C in 3HA alloy and 546–553°C in LM13 alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center of Excellence for Advanced Materials Processing (CEAMP), School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran 16846, Iran

References (23)

Show source-provided references
1. Yamagata H: ‘The science and technology of materialsin automotive engines’, 55–59; 2005, Cambridge, Woodhead Publishing Ltd.10.1533/9781845690854.1 ↗
2. Lee JA: ‘High-strength aluminum casting alloyfor high-temperature applications’, Reportno. 97-10, Marshall Space Flight Center, Huntsville,AL, USA, 1998.
3. Eady JA, Smith DM: Proc. Int. Cong. and Expo., SAETechnical Paper Series, Detroit, MI, USA, February–March 1984, SAE, Paper 840123.
4. 10.1016/j.actamat.2005.07.00310.1016/j.actamat.2005.07.003 ↗
5. Belov NA, Eskin DG, Aksenov AA: in ‘Multicomponentphase diagrams: applications for commercial aluminium alloys’, Chapter7, ‘Alloys with nickel’; 2005, Oxford, ElsevierLtd.10.1016/B978-008044537-3/50007-X ↗
6. 10.1016/j.jallcom.2009.09.18110.1016/j.jallcom.2009.09.181 ↗
7. 10.1016/j.intermet.2009.02.00310.1016/j.intermet.2009.02.003 ↗
8. 10.1016/j.jallcom.2005.07.07710.1016/j.jallcom.2005.07.077 ↗
9. 10.1016/j.msea.2007.12.03210.1016/j.msea.2007.12.032 ↗
10. 10.1007/s10853-009-4118-z10.1007/s10853-009-4118-z ↗
11. 10.1016/j.actamat.2009.05.01010.1016/j.actamat.2009.05.010 ↗
12. 10.1007/BF0264798910.1007/BF02647989 ↗
13. 10.1016/j.jallcom.2009.07.17110.1016/j.jallcom.2009.07.171 ↗
14. Backerud L, Chai G, Tamminen J: ‘Solidification characteristics of aluminumalloys: foundry alloys’, Vol. 2; 1990, Oslo, AFS/Skanaluminium.
15. Backerud L, Krol E, Tamminen J: ‘Solidification characteristics of aluminumalloys: wrought alloys’, Vol. 1; 1986, Oslo, AFS/Skanaluminium.
16. 10.1016/0261-3069(93)90076-810.1016/0261-3069(93)90076-8 ↗
17. 10.1016/j.msea.2007.05.02210.1016/j.msea.2007.05.022 ↗
18. 10.1007/s10973-010-1023-210.1007/s10973-010-1023-2 ↗
19. 10.1007/s11661-009-9978-y10.1007/s11661-009-9978-y ↗
20. 10.1016/B978-0-408-70932-3.50065-610.1016/B978-0-408-70932-3.50065-6 ↗
21. 10.1016/j.jallcom.2006.12.04210.1016/j.jallcom.2006.12.042 ↗
22. 10.1016/j.matlet.2007.11.03510.1016/j.matlet.2007.11.035 ↗
23. Kersker MM, Truckner WG, Granger DA, Rooy EL: ‘Aluminum alloy’, USPatent 4,681,736, 1987.