journal article·2021-04

Effect of Ti addition on the microstructure and properties of Cu–Cr alloy

Hang Fang, Ping Liu, Xiaohong Chen, Honglei Zhou, Shaoli Fu, Kejie Liu, Hang Liu, Weichun Guo

Materials Science and Technology· Volume 37· Issue 6
Publisher page

Abstract

The Cu–Cr–Ti alloys with different Ti contents were prepared by vacuum induction melting, solid solution, cold deformation, and ageing treatment. The microstructures, mechanical, and electrical properties of Cu–Cr–Ti alloys were investigated under different Ti contents. The results indicate that the increase of Ti content can improve the mechanical properties of Cu–Cr–Ti alloys, whereas its conductivity decreases significantly. After cold rolling by 80% and ageing at 500°C for 60 min, the Cu-0.3Cr-0.05Ti alloy with the hardness, electrical conductivity, and tensile strength are 162.6 HV, 82.2% IACS, and 510 MPa, respectively. The strengthening mechanism of the studied alloys is mainly attributed to the Orowan precipitation and dislocation strengthening. The addition of Ti in the ageing process can retard the growth and coarsen Cr precipitates.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, University of Shanghai for Science and Technology, Shanghai, People's Republic of China

Xin Chengrui Technology Co., Ltd, Jiangsu, People's Republic of China

Funding

State Key Laboratory of Advanced Optical Communication Systems and Networks · Jiangsu Provincial Key Research and Development Program · Innovative Research Group Project of the National Natural Science Foundation of China

References (21)

Show source-provided references
1. 10.1557/jmr.2016.14010.1557/jmr.2016.140 ↗
2. 10.1557/jmr.2016.10410.1557/jmr.2016.104 ↗
3. 10.1016/j.msea.2018.04.07710.1016/j.msea.2018.04.077 ↗
4. 10.1016/j.vacuum.2017.12.01110.1016/j.vacuum.2017.12.011 ↗
5. 10.1016/j.matdes.2009.04.01710.1016/j.matdes.2009.04.017 ↗
6. 10.1016/j.msea.2017.05.11410.1016/j.msea.2017.05.114 ↗
7. 10.1007/s12540-011-0807-710.1007/s12540-011-0807-7 ↗
8. 10.1016/S1003-6326(07)60050-810.1016/S1003-6326(07)60050-8 ↗
9. 10.1016/j.jallcom.2003.10.08910.1016/j.jallcom.2003.10.089 ↗
10. 10.1016/j.jallcom.2018.03.23810.1016/j.jallcom.2018.03.238 ↗
11. 10.1007/s11665-011-0084-010.1007/s11665-011-0084-0 ↗
12. 10.1007/s13632-014-0147-310.1007/s13632-014-0147-3 ↗
13. 10.1016/j.msea.2016.07.06310.1016/j.msea.2016.07.063 ↗
14. 10.1016/1359-6454(96)00072-910.1016/1359-6454(96)00072-9 ↗
15. 10.1016/j.matlet.2007.03.08510.1016/j.matlet.2007.03.085 ↗
16. 10.1016/j.msea.2015.10.04610.1016/j.msea.2015.10.046 ↗
17. 10.1016/j.jnucmat.2020.15206310.1016/j.jnucmat.2020.152063 ↗
18. 10.1557/jmr.2017.1710.1557/jmr.2017.17 ↗
19. 10.1080/1478643560823807410.1080/14786435608238074 ↗
20. 10.1016/j.msea.2015.05.00310.1016/j.msea.2015.05.003 ↗
21. 10.1016/j.jallcom.2013.08.14610.1016/j.jallcom.2013.08.146 ↗