Effects of processing parameters on the LPBF-deposited AlSi10Mg/SiC p composite: microstructure and mechanical properties
Source abstract
Abstract
Adding SiC particle (SiC p ) to Al alloys to form Al/SiC p composite can increase the elastic modulus and reduce the thermal expansion coefficient of the material. In this study, the microstructure, porosity and thermal expansion coefficient, and mechanical properties of AlSi10Mg-10 vol.% SiC p composite fabricated by laser powder bed fusion (LPBF) were investigated. The ultimate tensile strength, compressive strength, compressive modulus, and the thermal expansion coefficient of LPBF-deposited AlSi10Mg/SiC p composite are 351, 861.9 MPa, 121.9 GPa and 18.23 × 10 −6 °C −1 , respectively. The results demonstrate that the use of the E v equation to evaluate the effect of LPBF parameters on mechanical properties and relative density of the composites is accurate when only one parameter changes in the E v equation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials and Chemical Engineering, Xi'an Technological University, Xi'an, People's Republic of China
Funding
National Natural Science Foundation of China · Natural Science Foundation of Shaanxi Province
References (35)
Show source-provided references
1. 10.1016/j.actamat.2003.08.02310.1016/j.actamat.2003.08.023 ↗
2. 10.1016/j.actamat.2012.11.05210.1016/j.actamat.2012.11.052 ↗
3. 10.1016/j.pmatsci.2019.04.00610.1016/j.pmatsci.2019.04.006 ↗
4. 10.1016/j.jallcom.2020.15626010.1016/j.jallcom.2020.156260 ↗
5. 10.1016/j.jmapro.2015.04.00410.1016/j.jmapro.2015.04.004 ↗
6. 10.1007/s00170-018-1601-110.1007/s00170-018-1601-1 ↗
7. 10.1038/nature2389410.1038/nature23894 ↗
8. 10.1016/j.msea.2021.14086410.1016/j.msea.2021.140864 ↗
9. 10.1016/j.surfcoat.2015.04.02910.1016/j.surfcoat.2015.04.029 ↗
10. 10.1016/j.jmapro.2020.08.07310.1016/j.jmapro.2020.08.073 ↗
11. 10.1016/j.msea.2019.13815510.1016/j.msea.2019.138155 ↗
12. 10.1007/978-3-662-46089-410.1007/978-3-662-46089-4 ↗
13. 10.1016/j.vacuum.2018.11.02210.1016/j.vacuum.2018.11.022 ↗
14. 10.1016/j.matchar.2022.11220610.1016/j.matchar.2022.112206 ↗
15. 10.1016/j.jallcom.2022.16408110.1016/j.jallcom.2022.164081 ↗
16. 10.1016/j.matdes.2014.09.04410.1016/j.matdes.2014.09.044 ↗
17. 10.1016/j.jmapro.2018.09.00710.1016/j.jmapro.2018.09.007 ↗
18. 10.1016/j.actamat.2017.04.02610.1016/j.actamat.2017.04.026 ↗
19. 10.1016/j.jallcom.2021.16236510.1016/j.jallcom.2021.162365 ↗
20. 10.1002/adem.20160083510.1002/adem.201600835 ↗
21. 10.1016/j.ijfatigue.2020.10579710.1016/j.ijfatigue.2020.105797 ↗
22. 10.1016/j.msea.2020.14010910.1016/j.msea.2020.140109 ↗
23. 10.1016/j.jmst.2019.08.04910.1016/j.jmst.2019.08.049 ↗
24. 10.1016/j.actamat.2021.11686910.1016/j.actamat.2021.116869 ↗
25. 10.1016/S0927-796X(00)00024-310.1016/S0927-796X(00)00024-3 ↗
26. 10.1016/j.jmatprotec.2020.11669910.1016/j.jmatprotec.2020.116699 ↗
27. 10.1016/j.actamat.2005.08.03610.1016/j.actamat.2005.08.036 ↗
28. 10.1016/j.actamat.2016.07.01210.1016/j.actamat.2016.07.012 ↗
29. 10.1016/j.pmatsci.2015.03.00210.1016/j.pmatsci.2015.03.002 ↗
30. 10.3788/LOP202158.131400110.3788/LOP202158.1314001 ↗
31. 10.1016/S1359-6454(97)00265-610.1016/S1359-6454(97)00265-6 ↗
32. 10.1126/science.abg148710.1126/science.abg1487 ↗
33. 10.1016/j.scriptamat.2014.10.01110.1016/j.scriptamat.2014.10.011 ↗
34. 10.1016/j.addma.2019.10080110.1016/j.addma.2019.100801 ↗
35. 10.1007/s11465-018-0521-y10.1007/s11465-018-0521-y ↗