journal article·2023-03

Effect of cylinder liner cast iron microstructure on friction and wear process

Baofeng Zhang, Xuan Ma, Xiqun Lu, Yang Song, Yufeng Shi, Yudong Fu

Materials Science and Technology· Volume 39· Issue 5
Publisher page

Abstract

The diversified microstructure and complex composition of cast iron affect its friction and wear properties. In this work, three kinds of cylinder liner cast iron with different graphite morphologies were selected to analyse the friction and wear properties. Microstructure effects on tribological properties during friction were investigated by finite element simulation and pin-on-disc dry friction test. Wear mechanisms were studied using scanning electron microscopy and X-ray photoelectron spectroscopy. The results show that graphite bears a considerable strain value during the friction process, which is prone to wear and fall off, and the fallen graphite can reduce the friction coefficient. Ferrite around graphite can buffer stress, but it also can reduce wear resistance. And the more significant the lamellar spacing of pearlite, the more abrasive and adhesive effect.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Tribology and Wear Analysis · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Power and Energy Engineering, Harbin Engineering University, Harbin, People's Republic of China

College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin, People's Republic of China

Funding

Marine Low-Speed Engine Project-Phase I

References (57)

Show source-provided references
1. 10.1016/j.triboint.2004.01.01310.1016/j.triboint.2004.01.013 ↗
2. 10.1016/j.triboint.2011.11.02210.1016/j.triboint.2011.11.022 ↗
3. 10.1016/j.wear.2012.12.02810.1016/j.wear.2012.12.028 ↗
4. 10.4271/2010-01-152910.4271/2010-01-1529 ↗
5. 10.1080/1040200080244160310.1080/10402000802441603 ↗
6. 10.1108/ILT-07-2017-021810.1108/ILT-07-2017-0218 ↗
7. 10.1007/s11003-006-0048-y10.1007/s11003-006-0048-y ↗
8. 10.1016/j.ijsolstr.2004.07.02510.1016/j.ijsolstr.2004.07.025 ↗
9. 10.1080/02670836.2019.161304310.1080/02670836.2019.1613043 ↗
10. 10.1016/j.msea.2006.12.00910.1016/j.msea.2006.12.009 ↗
11. 10.1016/0043-1648(68)90558-910.1016/0043-1648(68)90558-9 ↗
12. 10.1016/0043-1648(81)90115-010.1016/0043-1648(81)90115-0 ↗
13. 10.1108/0036879051060172510.1108/00368790510601725 ↗
14. 10.1016/0043-1648(92)90303-P10.1016/0043-1648(92)90303-P ↗
15. 10.1007/s12666-012-0132-y10.1007/s12666-012-0132-y ↗
16. Ma Z · J Xi'an Technol Univ · 2016 · 36 · 522
17. 10.1016/S0043-1648(03)00156-X10.1016/S0043-1648(03)00156-X ↗
18. 10.1016/S0043-1648(01)00746-310.1016/S0043-1648(01)00746-3 ↗
19. 10.1016/j.wear.2009.10.01010.1016/j.wear.2009.10.010 ↗
20. 10.1016/0043-1648(93)90498-B10.1016/0043-1648(93)90498-B ↗
21. 10.1179/1743284714Y.000000075110.1179/1743284714Y.0000000751 ↗
22. 10.1007/s11249-018-1064-410.1007/s11249-018-1064-4 ↗
23. 10.1016/j.actamat.2018.12.04910.1016/j.actamat.2018.12.049 ↗
24. 10.1016/j.triboint.2020.10668510.1016/j.triboint.2020.106685 ↗
25. 10.1016/j.wear.2017.02.04610.1016/j.wear.2017.02.046 ↗
26. 10.1016/j.msea.2015.12.08210.1016/j.msea.2015.12.082 ↗
27. 10.1016/j.wear.2007.01.09110.1016/j.wear.2007.01.091 ↗
28. 10.1007/s11249-016-0683-x10.1007/s11249-016-0683-x ↗
29. 10.1007/s40544-020-0415-y10.1007/s40544-020-0415-y ↗
30. 10.1016/j.wear.2005.07.01010.1016/j.wear.2005.07.010 ↗
31. 10.1016/j.wear.2008.12.07110.1016/j.wear.2008.12.071 ↗
32. 10.1016/j.wear.2011.02.00910.1016/j.wear.2011.02.009 ↗
33. US-ASTM
34. 10.1016/j.msea.2021.14124410.1016/j.msea.2021.141244 ↗
35. 10.2355/isijinternational.40.117010.2355/isijinternational.40.1170 ↗
36. 10.1016/j.msea.2015.12.05610.1016/j.msea.2015.12.056 ↗
37. 10.1016/j.proeng.2016.01.17010.1016/j.proeng.2016.01.170 ↗
38. 10.1016/j.wear.2005.01.01410.1016/j.wear.2005.01.014 ↗
39. 10.1016/j.triboint.2009.10.00410.1016/j.triboint.2009.10.004 ↗
40. 10.1016/j.wear.2009.01.05810.1016/j.wear.2009.01.058 ↗
41. 10.1016/j.triboint.2019.05.03110.1016/j.triboint.2019.05.031 ↗
42. 10.1016/S0167-577X(02)00608-010.1016/S0167-577X(02)00608-0 ↗
43. 10.1504/IJSURFSE.2015.06703510.1504/IJSURFSE.2015.067035 ↗
44. 10.1016/j.apsusc.2007.09.06310.1016/j.apsusc.2007.09.063 ↗
45. 10.1016/0043-1648(71)90005-610.1016/0043-1648(71)90005-6 ↗
46. 10.1016/j.wear.2007.01.05710.1016/j.wear.2007.01.057 ↗
47. 10.1016/j.matpr.2017.11.06510.1016/j.matpr.2017.11.065 ↗
48. Gupta K, Maupi M, editors. A review on solid lubricant based machining of difficult-to-machine materials. 16th International Conference on Manufacturing Research ICMR 2018. 2018. Skovde (Sweden).
49. 10.1016/j.wear.2014.05.01510.1016/j.wear.2014.05.015 ↗
50. 10.1016/j.msea.2006.06.09010.1016/j.msea.2006.06.090 ↗
51. 10.1016/S0043-1648(01)00760-810.1016/S0043-1648(01)00760-8 ↗
52. 10.3221/IGF-ESIS.56.0610.3221/IGF-ESIS.56.06 ↗
53. 10.1016/j.cirpj.2012.03.00210.1016/j.cirpj.2012.03.002 ↗
54. Zhang Q · Tribology · 2017 · 37 · 823
55. 10.1016/j.triboint.2013.01.00310.1016/j.triboint.2013.01.003 ↗
56. 10.1016/j.mspro.2014.06.05110.1016/j.mspro.2014.06.051 ↗
57. 10.1016/j.wear.2014.11.01910.1016/j.wear.2014.11.019 ↗