journal article·2022-08

Effects of graphene on the mechanical properties of AlSi10Mg melted by SLM

Jiaqing Qiu, Changjun Chen, Min Zhang

Materials Science and Technology· Volume 38· Issue 12
Publisher page

Abstract

Graphene(GNPs) aluminum matrix composites have been widely used in transportation, aerospace, energy and power fields due to their high strength, good wear resistance and small thermal expansion coefficient. In this paper, AlSi10Mg-(0,0.5,1.0,2.0,4.0wt.%)graphene composite powders were prepared by vacuum mechanical milling, and then high quality composites were fabricated by selective laser melting(SLM). The SLM process of the composites was optimized, the microstructure and mechanical properties of AlSi10Mg-(0,0.5,1.0,2.0,4.0wt.%) graphene composites were analyzed. The results of scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy(EDS) and X-ray diffraction(XRD) showed, with the addition of graphene, the microstructure and mechanical properties of the samples are greatly affected. This benign change in the microscopic level has brought the improvement of mechanical properties to the sample.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laser Processing Research Center, School of Mechanical and Electric Engineering, Soochow University, Suzhou, People's Republic of China

Funding

Lanzhou University of Technology · Suzhou Science and Technology Bureau · Open Fund for Jiangsu Key Laboratory of Advanced Manufacturing Technology · Jiangsu Province 333 Talent Project

References (26)

Show source-provided references
1. 10.1016/j.matdes.2016.03.08110.1016/j.matdes.2016.03.081 ↗
2. 10.1016/j.phpro.2012.10.05910.1016/j.phpro.2012.10.059 ↗
3. 10.1016/j.actamat.2016.07.01210.1016/j.actamat.2016.07.012 ↗
4. Qing-wei G · J Mater Eng · 2019 · 47 · 32
5. 10.3390/met804026010.3390/met8040260 ↗
6. 10.1007/s12598-011-0224-610.1007/s12598-011-0224-6 ↗
7. 10.1016/j.matdes.2010.11.03710.1016/j.matdes.2010.11.037 ↗
8. 10.1016/j.jmrt.2013.11.00210.1016/j.jmrt.2013.11.002 ↗
9. 10.1002/adma.20100106810.1002/adma.201001068 ↗
10. Shin SE · Carbon (New York) · 2015 · 82 · 143
11. 10.1016/j.ijleo.2019.16384210.1016/j.ijleo.2019.163842 ↗
12. 10.1080/1745275100371862910.1080/17452751003718629 ↗
13. 10.1016/j.pmatsci.2015.03.00210.1016/j.pmatsci.2015.03.002 ↗
14. 10.1016/j.jmatprotec.2013.03.00910.1016/j.jmatprotec.2013.03.009 ↗
15. 10.1016/j.matpr.2017.11.68410.1016/j.matpr.2017.11.684 ↗
16. Zhao YH · Lasers Eng · 2021 · 48 · 183
17. 10.1016/j.matpr.2017.07.22110.1016/j.matpr.2017.07.221 ↗
18. Pourmand NS · Crit Rev Solid State Mater Sci · 2019 · 45 · 1
19. 10.3866/PKU.WHXB2010081210.3866/PKU.WHXB20100812 ↗
20. 10.1016/j.jallcom.2019.04.00710.1016/j.jallcom.2019.04.007 ↗
21. 10.3390/ma1303070210.3390/ma13030702 ↗
22. Tiwari JK · Addit Manuf · 2020 · 33 · 101095
23. 10.1016/j.apsusc.2019.14415610.1016/j.apsusc.2019.144156 ↗
24. 10.1088/2053-1591/ab3ef510.1088/2053-1591/ab3ef5 ↗
25. 10.3390/met909100010.3390/met9091000 ↗
26. 10.1038/ncomms1181610.1038/ncomms11816 ↗