Microstructure characterisation of Fe–21Cr–15Ni–Nb–V non-magnetic austenitic stainless steel during hot deformation
Source abstract
Abstract
Hot deformation behaviour of Fe–21Cr–15Ni–Nb–V stainless steel was investigated by isothermal compression in the temperature range of 950–1150°C with a strain rate of 0.01–10 s −1 . The results showed that complete recrystallisation occurred beyond 1050°C, resulting from the pinning effect of (Nb, V)(C, N). The nucleation of dynamic recrystallisation (DRX) was performed by the bulging, sub-grain swallowing and twinning mechanism. With increasing strain rate, new twinning was transformed into the Σ3 regeneration mechanism in the partial DRX region, while an opposite transformation was observed in the complete DRX region. In the partial recrystallisation region, grain rotation resulted in the formation of 110 orientation. In the complete recrystallisation region, the texture tended to distribute randomly at a high strain rate, and the grain growth was accompanied by the emergence of stable 100 orientation. GRAPHICAL ABSTRACT
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang, People's Republic of China
Funding
Fundamental Research Funds for the Central Universities · The financial support of National Natural Science Foundation of China · Research Fund for the Doctoral Program of Higher Education of China
References (38)
Show source-provided references
1. 10.1016/j.matdes.2014.12.04910.1016/j.matdes.2014.12.049 ↗
2. 10.1016/j.msea.2013.09.03610.1016/j.msea.2013.09.036 ↗
3. 10.1016/j.msea.2012.12.04310.1016/j.msea.2012.12.043 ↗
4. 10.1016/j.matdes.2015.12.03810.1016/j.matdes.2015.12.038 ↗
5. 10.1016/j.msea.2006.03.00310.1016/j.msea.2006.03.003 ↗
6. 10.1016/j.matchar.2015.07.00310.1016/j.matchar.2015.07.003 ↗
7. 10.1016/j.matchar.2016.05.01510.1016/j.matchar.2016.05.015 ↗
8. 10.1179/026708306X8147810.1179/026708306X81478 ↗
9. 10.1016/j.msea.2008.11.03510.1016/j.msea.2008.11.035 ↗
10. 10.1016/j.jnucmat.2015.05.01410.1016/j.jnucmat.2015.05.014 ↗
11. 10.1016/j.msea.2017.05.10910.1016/j.msea.2017.05.109 ↗
12. 10.1016/j.msea.2013.06.03710.1016/j.msea.2013.06.037 ↗
13. 10.1016/j.jallcom.2014.08.12910.1016/j.jallcom.2014.08.129 ↗
14. 10.1016/j.actamat.2010.10.03710.1016/j.actamat.2010.10.037 ↗
15. 10.1016/1359-6454(95)00146-710.1016/1359-6454(95)00146-7 ↗
16. 10.2355/isijinternational.43.68410.2355/isijinternational.43.684 ↗
17. 10.1016/j.scriptamat.2006.10.00710.1016/j.scriptamat.2006.10.007 ↗
18. 10.1016/j.msea.2014.04.06510.1016/j.msea.2014.04.065 ↗
19. 10.1016/j.msea.2012.06.01110.1016/j.msea.2012.06.011 ↗
20. 10.1007/s11661-011-0836-310.1007/s11661-011-0836-3 ↗
21. 10.1016/j.jallcom.2017.02.28410.1016/j.jallcom.2017.02.284 ↗
22. 10.1361/10599490177034459310.1361/105994901770344593 ↗
23. 10.1007/BF0264724510.1007/BF02647245 ↗
24. 10.1016/j.jnucmat.2014.09.03010.1016/j.jnucmat.2014.09.030 ↗
25. 10.1016/j.actamat.2009.02.03310.1016/j.actamat.2009.02.033 ↗
26. 10.1016/j.actamat.2006.06.03010.1016/j.actamat.2006.06.030 ↗
27. 10.1016/j.msea.2014.12.04610.1016/j.msea.2014.12.046 ↗
28. 10.1016/j.actamat.2013.11.06010.1016/j.actamat.2013.11.060 ↗
29. 10.1016/S1359-6462(02)00072-610.1016/S1359-6462(02)00072-6 ↗
30. 10.1016/j.jallcom.2017.07.02710.1016/j.jallcom.2017.07.027 ↗
31. 10.1016/j.msea.2014.12.04610.1016/j.msea.2014.12.046 ↗
32. 10.1016/j.actamat.2004.05.03110.1016/j.actamat.2004.05.031 ↗
33. 10.1016/S0921-5093(02)00919-X10.1016/S0921-5093(02)00919-X ↗
34. 10.1016/1359-6462(96)00234-510.1016/1359-6462(96)00234-5 ↗
35. 10.1016/j.actamat.2006.03.04810.1016/j.actamat.2006.03.048 ↗
36. Tsuji N. · Presented at the J.J. Jonas symposium on thermomechanical processing, texture and formability of steel · 2000
37. 10.1016/0956-716X(92)90143-310.1016/0956-716X(92)90143-3 ↗
38. 10.1590/S1516-1439201300500017010.1590/S1516-14392013005000170 ↗