Modelling dissolution of low melting point phases during the homogenisation of AA7020 aluminium alloy
Source abstract
Abstract
The presence of low melting points (LMP) phases in the structure of 7XXX series aluminium alloys restricts the extrusion speed applicable and extrudate shape complexity. It is thus of great interest to understand and quantify the dissolution behaviour of the LMP phases during homogenisation at various temperatures and times before extrusion. In this research, an interface reaction limited (IRL) model was applied to predict the dissolution of the LMP phases in terms of the radius and volume fraction of the LMP phases as a function of homogenisation time and temperature. A value of 3·7 × 10−6 m s−1 was predicted for the kinetic coefficient of the interface reaction, which is in the typical range of kinetic coefficients for the interface reaction limited processes. The predictions of the volume fraction of the dissolved LMP phases from the model were verified experimentally using differential scanning calorimetry (DSC) and a good agreement was found.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Innovation InstituteMekelweg 2, 2628 CD Delft, The Netherlands; Department of Materials Science and Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands
Materials Innovation InstituteMekelweg 2, 2628 CD Delft, The Netherlands
Department of Materials Science and EngineeringDelft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands
References (22)
Show source-provided references
1. Nadella R. · Mater. Sc · 2008 · 421
2. Sheppard T. ‘Extrusion of aluminum alloys’, 227-252; 1999, Dordrecht, Kluwer Academic Publishers.10.1007/978-1-4757-3001-2 ↗
3. Jackson A., and Sheppard T.: Proc. 6th Int. Aluminum Extrusion Technology Sem., Chicago, IL, USA, May 1996, Aluminium Extruders Council,541–550.
4. 10.1007/BF0267258510.1007/BF02672585 ↗
5. 10.1016/j.msea.2004.09.01310.1016/j.msea.2004.09.013 ↗
6. 10.1007/BF0266332610.1007/BF02663326 ↗
7. 10.1179/msc.1969.3.1.9510.1179/msc.1969.3.1.95 ↗
8. Nolfi F. V. · Trans. Metall Soc. AIME · 1969 · 245 · 1427
9. Tanzilli R. A. · Trans. MetalL Soc. AIME · 1968 · 242 · 2313
10. 10.1007/BF0280116110.1007/BF02801161 ↗
11. 10.1007/BF0280116010.1007/BF02801160 ↗
12. 10.1016/S0377-0427(99)00355-610.1016/S0377-0427(99)00355-6 ↗
13. 10.1016/S0921-5093(96)10441-X10.1016/S0921-5093(96)10441-X ↗
14. 10.1016/0956-716X(95)91604-N10.1016/0956-716X(95)91604-N ↗
15. 10.1063/1.165847410.1063/1.1658474 ↗
16. 10.1007/s11661-000-0163-610.1007/s11661-000-0163-6 ↗
17. Eivani A. R., Ahmed H., Zhou J., and Duszczyk J.: MetalL Mater. Trans. A, 2008, In press.
18. Eivani A. R., Ahmed H., Thou J., and Duszczyk J.: Proc. 11th Int. Conf. on ‘Aluminium alloys’, Aachen, Germany, September 2008, DGM,993–999.
19. Ahmed H., Eivani A. R., Thou J., and Duszczyk J.: MetalL Mater. Trans. A, 2008, to be published.
20. Lim S. T. · Mater. Sci. Forum · 2006 · 519 · 1
21. International ASM: ‘ASM handbook’,Vol. 3, ‘Phase diagrams’, 10th edn; 1992, Materials Park, OH, ASM International.
22. 10.1080/1478643730822095810.1080/14786437308220958 ↗