Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles
Source abstract
Abstract
The work aimed to develop surfaces that could resist wear at high temperatures, thus achieving a prolonged component life. Surface modification of a low-alloy steel by incorporating TiC particles has been undertaken by melting the surface using a tungsten inert gas torch. The dry sliding wear behaviour at 600°C of the original and modified surfaces was compared. Microscopic examination of both surfaces showed glazed layers across the wear tracks, with differing amounts of oxide and homogeneity. Extensive wear occurred on the steel surface, which showed deformation of the wear scar tracks and a steadily increased friction coefficient. The TiC addition reduced the wear loss, coinciding with a glazed layer 33% thinner than that on the low-alloy steel sample.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Advance Manufacturing and Surface Engineering Research Unit, Department of Manufacturing and Materials Engineering, International Islamic University Malaysia, Kuala Lumpur, Malaysia
School of Mechanical Engineering, Universiti Sains Malaysia, Nibong Tebal, Penang, Malaysia
Department of Mechanical and Aerospace Engineering, University of Strathclyde, Glasgow, UK
Funding
International Islamic University Malaysia
References (36)
Show source-provided references
1. Ayers JD. Particulate composite surfaces by laser processing. In: Mukherjee K, , Majumder J, editors. Laser in metallurgy. Warrendale ( PA): Metallugical Society of AIME; 1981. p. 115–125.
2. StephensJR. Intermetallic and ceramic matrix composites for 815 to 1370°C (1500 to 2500°F) gas turbine engine application. Tech. Memo. 102326. CA USA: NASA; 1990. p. 1–9.
3. 10.1179/02670839679016598410.1179/026708396790165984 ↗
4. 10.1016/0301-679X(87)90024-710.1016/0301-679X(87)90024-7 ↗
5. 10.1080/02670836.2016.117343510.1080/02670836.2016.1173435 ↗
6. 10.4028/www.scientific.net/AMR.445.65510.4028/www.scientific.net/AMR.445.655 ↗
7. 10.4028/www.scientific.net/AMR.576.46310.4028/www.scientific.net/AMR.576.463 ↗
8. 10.4028/www.scientific.net/AMR.576.46710.4028/www.scientific.net/AMR.576.467 ↗
9. Mridha S, , Md Idriss AN, , Maleque MA, Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding arc. Int J Mech Mater Eng. 2012;7:48–53.
10. 10.1179/1743284714Y.000000053010.1179/1743284714Y.0000000530 ↗
11. 10.1179/1743284714Y.000000071210.1179/1743284714Y.0000000712 ↗
12. Muñoz Escalona P, , Mridha S, , Baker TN. Effect of shielding gas on the properties and microstructure of melted steel surface using a TIG torch. Adv Mater Proc Technol. 2015;1:435–443.
13. 10.1016/j.surfcoat.2016.08.05610.1016/j.surfcoat.2016.08.056 ↗
14. 10.1016/S0257-8972(03)00821-110.1016/S0257-8972(03)00821-1 ↗
15. 10.1016/j.wear.2004.04.01410.1016/j.wear.2004.04.014 ↗
16. 10.1016/S0043-1648(01)00772-410.1016/S0043-1648(01)00772-4 ↗
17. 10.1016/j.triboint.2012.12.00510.1016/j.triboint.2012.12.005 ↗
18. 10.1016/S0043-1648(03)00134-010.1016/S0043-1648(03)00134-0 ↗
19. 10.1016/S0301-679X(98)00027-910.1016/S0301-679X(98)00027-9 ↗
20. 10.1016/S0301-679X(02)00032-410.1016/S0301-679X(02)00032-4 ↗
21. 10.1016/j.triboint.2014.02.00210.1016/j.triboint.2014.02.002 ↗
22. 10.1080/02670836.2016.114204910.1080/02670836.2016.1142049 ↗
23. Easterling KE. Introduction to physical metallurgy of welding. London: Butterworth-Heinemann; 1992.
24. Schneider MF. Laser cladding with powder, effect of some machining parameters on clad properties [PhD thesis]. Enschede (The Netherlands): University of Twente; 1998.
25. 10.2351/1.52188810.2351/1.521888 ↗
26. 10.1179/msc.1977.11.12.55110.1179/msc.1977.11.12.551 ↗
27. 10.1179/mst.1989.5.10.103410.1179/mst.1989.5.10.1034 ↗
28. 10.1016/0921-5093(96)10267-710.1016/0921-5093(96)10267-7 ↗
29. 10.1023/A:101862180198710.1023/A:1018621801987 ↗
30. Smithells CJ editor. Metals reference book. 5th ed. London: Butterworth & Co.; 1976. p. 945.
31. 10.1016/j.msea.2006.06.01510.1016/j.msea.2006.06.015 ↗
32. Bayer RG. Mechanical wear and fundamental testing. 2nd ed., revised and expanded. New York ( NY): Marcel Dekker; 2004.
33. 10.1016/j.wear.2010.12.00710.1016/j.wear.2010.12.007 ↗
34. 10.1016/0043-1648(84)90031-010.1016/0043-1648(84)90031-0 ↗
35. 10.1016/S0301-679X(02)00015-410.1016/S0301-679X(02)00015-4 ↗
36. Md Idriss AN. Unpublished work.