Acceleration of regeneration treatment for nanostructured bainitic steel welding by static recrystallisation
Source abstract
Abstract
In order to accelerate bainite transformation during regeneration treatment following nanostructured bainite steel welding, static recrystallisation mechanism is adopted to refine the coarse grain size during two-pass welding. Large mechanical deformation was introduced into the coarse grain zone of the first weld pass, where static recrystallisation would occur with thermal effect of the second weld pass. Static recrystallisation kinetics of nanostructure bainite was studied by two-pass hot deformation experiments. The explicit temperature function of two-pass welding was presented, and effect of welding parameters on static recrystallisation of the deformed coarse grain zone was analysed. Experimental results showed that grains in original coarse grain zone were greatly refined and that nanostructured bainite regeneration was remarkably accelerated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Advanced Welding and Joining Harbin Institute of Technology, Harbin 150001, China
Institute of Process Equipment and Control Engineering Zhejiang University of Technology, Hangzhou 310032, China
References (22)
Show source-provided references
1. 10.1016/j.cossms.2004.09.00510.1016/j.cossms.2004.09.005 ↗
2. Bhadeshia HKDH · Proc. R. Soc. London A · 2010 · 4663
3. Garcia-Mateo C · J. Phys. D · 2003 · 112 · 285
4. 10.1016/j.msea.2006.11.18110.1016/j.msea.2006.11.181 ↗
5. 10.4028/www.scientific.net/AMR.482-484.240510.4028/www.scientific.net/AMR.482-484.2405 ↗
6. Hong SG, Cho MH and Lee JS: ‘AWST-10/99 Effects of post weld rapid heat treatment on microstructural evolution in high–carbon bainitic steel weld’, Int. Conf. Advances in Welding Science and Technology, Istanbul, Turkey, 2010, 47–54.
7. 10.1088/1468-6996/14/1/01420210.1088/1468-6996/14/1/014202 ↗
8. 10.1016/j.matdes.2013.02.01910.1016/j.matdes.2013.02.019 ↗
9. 10.1016/j.msea.2012.03.09810.1016/j.msea.2012.03.098 ↗
10. 10.1179/02670830122500072510.1179/026708301225000725 ↗
11. 10.1016/j.matdes.2011.10.00810.1016/j.matdes.2011.10.008 ↗
12. 10.2355/isijinternational.43.182110.2355/isijinternational.43.1821 ↗
13. 10.1016/j.scriptamat.2013.01.03310.1016/j.scriptamat.2013.01.033 ↗
14. 10.1016/j.matlet.2014.02.05110.1016/j.matlet.2014.02.051 ↗
15. 10.1179/mst.1992.8.11.98510.1179/mst.1992.8.11.985 ↗
16. Kimura T · JFE Tech. Rep. · 2005 · 5 · 45
17. Kojima A · Shinnittetsu Giho · 2004 · 380 · 33
18. 10.1016/j.jmatprotec.2013.12.01710.1016/j.jmatprotec.2013.12.017 ↗
19. 10.1016/B978-008044164-1/50011-610.1016/B978-008044164-1/50011-6 ↗
20. 10.1023/A:101790603017210.1023/A:1017906030172 ↗
21. Wang RZ · J. Iron. Steel Res. Int. · 2006 · 18 · 33
22. Fang HY: ‘The welding structure’; 2011, Beijing, China Machine Press.