Structure and properties of solid state diffusion bonding of 17-4PH stainless steel and titanium
Source abstract
Abstract
Solid state diffusion bonded joint between titanium and 17-4 precipitation hardening stainless steel was carried out in the temperature range of 800–1050°C in steps of 50°C for 30 min and also at 950°C for 30–180 min in steps of 30 min under a uniaxial pressure of 3·5 MPa in vacuum. Bonded samples were characterised using light microscopy, field emission scanning electron microscopy and X-ray diffraction technique. Up to 850°C for 30 min, FeTi phase was formed at the diffusion interface; however, α-Fe+ λ, χ, Fe2Ti and FeTi phases and phase mixtures were formed above 850°C for 30 min and at 950°C for all bonding times. Maximum tensile strength of ∼326 MPa, shear strength of ∼254 MPa and impact toughness of ∼24 J were obtained for the diffusion couple processed at 1000°C for 30 min and 30–180 min time interval at 950°C, and maximum tensile strength ∼323 MPa, shear strength ∼243 MPa and impact toughness of ∼22 J were achieved when bonding was processed for 120 min. The residual stress of the bonded joints increases with the increase in bonding temperatures and times.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, Howrah 711103, India
Department of Metallurgical and Materials Engineering, Colorado School of Mines, Golden, CO 80401, USA
References (32)
Show source-provided references
1. 10.1016/S0022-3115(98)00179-210.1016/S0022-3115(98)00179-2 ↗
2. 10.1016/j.msea.2007.10.07510.1016/j.msea.2007.10.075 ↗
3. 10.1007/BF0258614010.1007/BF02586140 ↗
4. 10.1116/1.58112310.1116/1.581123 ↗
5. 10.1016/j.msea.2009.12.04210.1016/j.msea.2009.12.042 ↗
6. 10.1179/02670830110151111210.1179/026708301101511112 ↗
7. 10.1016/j.matdes.2008.04.00310.1016/j.matdes.2008.04.003 ↗
8. 10.1179/imr.1998.43.1.110.1179/imr.1998.43.1.1 ↗
9. 10.1179/174328407X15861310.1179/174328407X158613 ↗
10. 10.1016/j.msea.2007.08.07610.1016/j.msea.2007.08.076 ↗
11. 10.1179/mst.1986.2.4.40510.1179/mst.1986.2.4.405 ↗
12. Calvo F. A. · J. Mater. Sci. · 1992 · 391 · 74
13. 10.1016/0022-5088(90)90347-M10.1016/0022-5088(90)90347-M ↗
14. 10.1016/j.ijhydene.2008.10.07110.1016/j.ijhydene.2008.10.071 ↗
15. 10.1179/174328406X11835710.1179/174328406X118357 ↗
16. 10.1179/02670830112500023010.1179/026708301125000230 ↗
17. 10.1179/174328408X31110710.1179/174328408X311107 ↗
18. 10.1023/A:101535693047610.1023/A:1015356930476 ↗
19. 10.1023/A:101584582262910.1023/A:1015845822629 ↗
20. 10.1007/s10853-005-1629-010.1007/s10853-005-1629-0 ↗
21. 10.1016/S1359-6462(01)01041-710.1016/S1359-6462(01)01041-7 ↗
22. 10.1016/j.matlet.2006.07.12310.1016/j.matlet.2006.07.123 ↗
23. 10.1016/j.matchar.2005.09.01510.1016/j.matchar.2005.09.015 ↗
24. ASTM, Philadelphia, PA, USA · 1997 · 03 · 87
25. 10.1179/mst.1993.9.8.63310.1179/mst.1993.9.8.633 ↗
26. Massalski T. B. ‘Binary alloy phase diagrams’, 2nd edn, Vol. 2, 1735; 1996, Materials Park, OH, ASM International.
27. Villars P., Prince A., and Okamoto H. ‘Handbook of ternary phase alloys’, 7; 1995, Materials Park, OH, ASM International.
28. 10.1016/j.msea.2006.08.01910.1016/j.msea.2006.08.019 ↗
29. 10.1016/j.msea.2007.07.03310.1016/j.msea.2007.07.033 ↗
30. 10.1016/j.matdes.2011.10.04110.1016/j.matdes.2011.10.041 ↗
31. 10.1016/j.msea.2005.07.01010.1016/j.msea.2005.07.010 ↗
32. 10.1007/s11661-007-9457-210.1007/s11661-007-9457-2 ↗