journal article·2023-11

Increasing thermal conductivity in aluminium-copper compound castings: Modelling and experiments

Hans Jürgen Maier, Richard Gawlytta, Andreas Fromm, Christian Klose

Materials Science and Technology· Volume 39· Issue 15
Publisher page

Abstract

Compound cast heat sinks have various advantages over conventionally manufactured ones, but oxides present on the metals and formation of a brittle intermetallic layer (IMC) make casting difficult. In the present study, a novel approach was used that employs a silane-doped argon environment to overcome these issues. Oxidation could be fully suppressed and thermal heat conductivities around 67 W/(m·K) were obtained for the compound zone. The microstructural analysis revealed that the thickness of the IMC layer could be kept below the critical value of 3 µm. Yet, the process window was found to be extremely tight. The modelling revealed that the critical time period for formation of the IMC layer is only on the order of a few 10 s.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institut für Werkstoffkunde (Materials Science), Leibniz Universität Hannover Garbsen, Germany

Funding

Deutsche Forschungsgemeinschaft · German Research Foundation

References (28)

Show source-provided references
1. Carver G. Best Thermal Paste for CPUs 2022: 90 Pastes tested and ranked: the right thermal paste will improve performance. [cited 2022 Aug 25]. Available from: https://www.tomshardware.com/best-picks/best-thermal-paste.
2. 10.1002/adem.20170102710.1002/adem.201701027 ↗
3. 10.1016/j.scriptamat.2005.02.00410.1016/j.scriptamat.2005.02.004 ↗
4. 10.1016/S0925-8388(01)00872-610.1016/S0925-8388(01)00872-6 ↗
5. 10.1002/adem.20180004810.1002/adem.201800048 ↗
6. Berski S, Stradomski Z, Dyja H. Quality of bimetal Al-Cu joint after explosive cladding. J Achievements Mater Manuf Eng. 2007;22:73–76.
7. 10.1179/1743284712Y.000000009610.1179/1743284712Y.0000000096 ↗
8. 10.1007/s40962-022-00910-w10.1007/s40962-022-00910-w ↗
9. 10.1007/s40684-019-00109-110.1007/s40684-019-00109-1 ↗
10. 10.3390/met1009116110.3390/met10091161 ↗
11. 10.1016/j.matdes.2016.06.07610.1016/j.matdes.2016.06.076 ↗
12. 10.1016/j.actamat.2011.05.04110.1016/j.actamat.2011.05.041 ↗
13. Massalski TB, Okamoto H, Subramanian PR , editors. Binary alloy phase diagrams. Materials Park, US: ASM International; 1996.
14. 10.1088/0965-0393/22/6/06501310.1088/0965-0393/22/6/065013 ↗
15. 10.3139/105.11036810.3139/105.110368 ↗
16. 10.2320/matertrans1960.12.14710.2320/matertrans1960.12.147 ↗
17. 10.1007/s11663-004-0085-610.1007/s11663-004-0085-6 ↗
18. 10.1007/s10853-012-6370-x10.1007/s10853-012-6370-x ↗
19. 10.4028/www.scientific.net/DDF.279.6310.4028/www.scientific.net/DDF.279.63 ↗
20. 10.1007/s41230-017-6057-710.1007/s41230-017-6057-7 ↗
21. 10.1080/10426914.2019.161508410.1080/10426914.2019.1615084 ↗
22. 10.1016/j.matdes.2015.10.07210.1016/j.matdes.2015.10.072 ↗
23. Pfeifer S. Einfluss intermetallischer Phasen der Systeme Al-Cu und Al-Ag auf den Widerstand stromtragender Verbindungen im Temperaturbereich von 90°C bis 200°C [dissertation]. Technische Universität Dresden; 2015.
24. 10.1016/j.actamat.2012.11.03010.1016/j.actamat.2012.11.030 ↗
25. LideDR editor. CRC handbook of chemistry and physics: internet version. Boca Raton (FL): CRC Press; 2005. Available from: http://www.hbcpnetbase.com.
26. 10.1088/2053-1591/ab2d8f10.1088/2053-1591/ab2d8f ↗
27. 10.1007/s41230-019-8171-110.1007/s41230-019-8171-1 ↗
28. 10.12691/ijml-1-1-410.12691/ijml-1-1-4 ↗