journal article·2023-05

Surface roughness – the key for roll bonding aluminium

Akash Biradar, M. Rijesh

Materials Science and Technology· Volume 39· Issue 7
Publisher page

Abstract

In this study, the commercially pure aluminium is roll bonded at ambient temperatures. The effect of surface roughness and roll speed on the bond strength is evaluated by using the lap shear test. It is observed that the bond strength increased considerably with increasing surface roughness. The deformation caused owing to scratch brushing changed the surface roughness profile, which is the salient reason for the bond strength variation. Continuous striations with peaks and valleys of small-scale heights are observed at lower roughness values. Increasing roughness has reformed them into discrete profile asperities with sharp tips, influencing localised junction formation. On the other hand, the roll velocity has shown hardly any effect on the roll bonding of aluminium. With thorough investigation, it was conclusively explained that the effective change in the bond strength was not appreciable with varying the roll speed, provided the roll bonding takes place at optimised surface roughness conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Manufacturing Engineering, School of Mechanical Engineering, Vellore Institute of Technology, Vellore, India

Funding

Council of Scientific and Industrial Research · Central Mechanical Engineering Research Institute.

References (58)

Show source-provided references
1. 10.1080/00218464.2015.111606710.1080/00218464.2015.1116067 ↗
2. 10.1179/1743284712Y.000000009110.1179/1743284712Y.0000000091 ↗
3. 10.1016/j.jmapro.2020.02.04410.1016/j.jmapro.2020.02.044 ↗
4. 10.1016/j.jmapro.2019.08.02510.1016/j.jmapro.2019.08.025 ↗
5. 10.1179/mst.1989.5.9.93410.1179/mst.1989.5.9.934 ↗
6. 10.1016/S1359-6454(98)00365-610.1016/S1359-6454(98)00365-6 ↗
7. 10.1016/j.msea.2017.09.08510.1016/j.msea.2017.09.085 ↗
8. 10.1016/j.jallcom.2021.15951310.1016/j.jallcom.2021.159513 ↗
9. 10.1016/j.msea.2015.08.06410.1016/j.msea.2015.08.064 ↗
10. 10.1016/j.jmrt.2019.10.07710.1016/j.jmrt.2019.10.077 ↗
11. 10.1016/j.jallcom.2018.10.00710.1016/j.jallcom.2018.10.007 ↗
12. 10.1016/j.jmrt.2019.12.01610.1016/j.jmrt.2019.12.016 ↗
13. 10.1016/j.jmrt.2019.07.03910.1016/j.jmrt.2019.07.039 ↗
14. 10.1177/002199831769214110.1177/0021998317692141 ↗
15. 10.3139/146.11156610.3139/146.111566 ↗
16. 10.1177/002199831987668410.1177/0021998319876684 ↗
17. 10.1177/002199831878146210.1177/0021998318781462 ↗
18. 10.1016/j.matdes.2009.04.03610.1016/j.matdes.2009.04.036 ↗
19. Bay N. · Weld J (Miami, Fla) · 1983 · 62 · 137
20. 10.1179/136217108X32930410.1179/136217108X329304 ↗
21. 10.1186/s10033-020-00483-x10.1186/s10033-020-00483-x ↗
22. 10.1016/0143-7496(90)90099-J10.1016/0143-7496(90)90099-J ↗
23. 10.1016/j.promfg.2019.02.09810.1016/j.promfg.2019.02.098 ↗
24. Zhang W, Aps E, Bay N. Cold welding – Experimental investigation of the surface preparation methods. 1997.
25. 10.1016/S0007-8506(07)63050-910.1016/S0007-8506(07)63050-9 ↗
26. 10.1088/1468-6996/9/2/02300110.1088/1468-6996/9/2/023001 ↗
27. 10.1155/2014/61482110.1155/2014/614821 ↗
28. 10.1016/j.jmapro.2021.02.00610.1016/j.jmapro.2021.02.006 ↗
29. 10.1016/S0921-5093(04)00906-210.1016/S0921-5093(04)00906-2 ↗
30. Milner · Met Constr Br Weld J · 1960 · 7 · 1
31. Perspectives F. Roll bonding processes: state-of-the-art and future perspectives. 2021.
32. 10.1163/156856196X0035510.1163/156856196X00355 ↗
33. 10.1016/j.msea.2009.11.06910.1016/j.msea.2009.11.069 ↗
34. 10.1016/j.jmapro.2020.03.04210.1016/j.jmapro.2020.03.042 ↗
35. 10.1016/j.jmapro.2016.08.00810.1016/j.jmapro.2016.08.008 ↗
36. 10.1016/j.scriptamat.2008.01.02210.1016/j.scriptamat.2008.01.022 ↗
37. 10.1080/00084433.2017.140553910.1080/00084433.2017.1405539 ↗
38. 10.1080/0950711950954881710.1080/09507119509548817 ↗
39. 10.1007/s12289-008-0136-710.1007/s12289-008-0136-7 ↗
40. 10.1007/s11665-010-9664-710.1007/s11665-010-9664-7 ↗
41. 10.31399/asm.hb.v04e.a000628510.31399/asm.hb.v04e.a0006285 ↗
42. Milner · Mtlr · 1962 · 7 · 433
43. Mohamed HA · Weld J (Miami, Fla) · 1975 · 54 · 302
44. 10.1016/0022-3913(83)90201-910.1016/0022-3913(83)90201-9 ↗
45. 10.1179/mt.1978.5.1.2410.1179/mt.1978.5.1.24 ↗
46. 10.1080/1040778100361334910.1080/10407781003613349 ↗
47. 10.1080/01694243.2021.195201310.1080/01694243.2021.1952013 ↗
48. 10.1093/oso/9780198507772.001.000110.1093/oso/9780198507772.001.0001 ↗
49. 10.1007/s11223-015-9641-310.1007/s11223-015-9641-3 ↗
50. 10.1016/j.matdes.2016.05.11210.1016/j.matdes.2016.05.112 ↗
51. 10.1016/j.jmatprotec.2021.11717310.1016/j.jmatprotec.2021.117173 ↗
52. Reviewed P, Berkeley L, Cancer B. Lawrence Berkeley National Laboratory Lawrence Berkeley National Laboratory. 2010;35–43.
53. 10.1007/s11665-010-9664-710.1007/s11665-010-9664-7 ↗
54. 10.1016/0043-1648(94)07005-910.1016/0043-1648(94)07005-9 ↗
55. Bowden FP. · The Friction and Lubrication of Solids · 1950 · 19 · 428
56. 10.1098/rspa.1956.000110.1098/rspa.1956.0001 ↗
57. 10.1007/BF0302642310.1007/BF03026423 ↗
58. Bonfring Int J Ind Eng Manag Sci · 2012 · 2 · 35