journal article·2021-03

Investigation of solidification modes of high Manganese steels

Yaozu Shen, Jianhua Liu, Hao Xu

Materials Science and Technology· Volume 37· Issue 4
Publisher page

Abstract

The solidification modes of high manganese steels were measured by experiments and comparatively calculated by different predicted methods. The DSC experiments indicate the same phase transformation sequence as the isothermal solidification experiments. It is demonstrated that the solidification modes of the Fe–0.028C–21.1Mn–5.72Al, Fe–0.28C–21.0Mn–5.80Al and Fe–0.64C–21.0Mn–5.80Al alloys are F mode, FA1 mode and FA2 mode. The change of heating/cooling rate influences the position and shape of the peaks in the DSC curves but has no effect on the solidification mode. By comparison with different calculation methods, the equilibrium model is shown to be a valuable tool to predict the solidification sequence of the high-Mn steel, from which the critical carbon range for the Fe–C–20Mn–5Al alloy is calculated to be 0.062∼0.427 wt-%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Engineering Technology, University of Science and Technology Beijing, Beijing, People's Republic of China

Funding

National Nature Science Foundation of China · China Scholarship Council · Fundamental Research Funds for the Central Universities

References (38)

Show source-provided references
1. 10.1016/S1044-5803(97)80024-110.1016/S1044-5803(97)80024-1 ↗
2. 10.1016/S1006-706X(08)60271-X10.1016/S1006-706X(08)60271-X ↗
3. 10.1179/174328109X44571410.1179/174328109X445714 ↗
4. 10.1007/s11663-008-9159-110.1007/s11663-008-9159-1 ↗
5. 10.1007/s12598-011-0418-y10.1007/s12598-011-0418-y ↗
6. 10.1002/srin.20060644010.1002/srin.200606440 ↗
7. 10.1016/j.msea.2017.10.00110.1016/j.msea.2017.10.001 ↗
8. 10.1016/j.jcrysgro.2019.01.02310.1016/j.jcrysgro.2019.01.023 ↗
9. 10.1016/S0749-6419(99)00078-910.1016/S0749-6419(99)00078-9 ↗
10. 10.1007/s12540-010-0001-310.1007/s12540-010-0001-3 ↗
11. 10.1179/mst.1998.14.12.121310.1179/mst.1998.14.12.1213 ↗
12. 10.1016/j.msea.2010.02.05810.1016/j.msea.2010.02.058 ↗
13. 10.1016/j.msea.2004.01.06010.1016/j.msea.2004.01.060 ↗
14. 10.1016/j.actamat.2011.07.00910.1016/j.actamat.2011.07.009 ↗
15. 10.1016/j.calphad.2015.08.00410.1016/j.calphad.2015.08.004 ↗
16. 10.2355/isijinternational.47.89810.2355/isijinternational.47.898 ↗
17. 10.1016/j.jallcom.2010.06.03210.1016/j.jallcom.2010.06.032 ↗
18. 10.2355/isijinternational.30.68010.2355/isijinternational.30.680 ↗
19. 10.1016/0956-716X(94)90610-610.1016/0956-716X(94)90610-6 ↗
20. 10.1016/S0254-0584(99)00026-710.1016/S0254-0584(99)00026-7 ↗
21. 10.1016/0036-9748(89)90483-310.1016/0036-9748(89)90483-3 ↗
22. 10.1007/BF0265670510.1007/BF02656705 ↗
23. 10.1007/s11661-013-2083-210.1007/s11661-013-2083-2 ↗
24. 10.1016/j.jallcom.2013.03.24110.1016/j.jallcom.2013.03.241 ↗
25. 10.1179/03019230422501923410.1179/030192304225019234 ↗
26. 10.1007/BF0041200610.1007/BF00412006 ↗
27. Wolf MM. in Continuous Casting: Initial Solidification Strand Surface Quality of Peritectic Steels. MM Wolf, ed, Iron and Steel Society/AIME, Warrendale, PA, 1997;9:61-65.
28. Blazek KE · Iron Steel Technol · 2008 · 5 · 80
29. 10.1007/s11837-014-1000-510.1007/s11837-014-1000-5 ↗
30. 10.1007/s11661-013-1671-510.1007/s11661-013-1671-5 ↗
31. 10.1023/B:JMSC.0000048736.86794.1210.1023/B:JMSC.0000048736.86794.12 ↗
32. 10.1007/BF0265029810.1007/BF02650298 ↗
33. 10.1016/j.jmatprotec.2004.07.06310.1016/j.jmatprotec.2004.07.063 ↗
34. 10.4028/www.scientific.net/SSP.116-117.68110.4028/www.scientific.net/SSP.116-117.681 ↗
35. 10.1002/srin.20180054610.1002/srin.201800546 ↗
36. 10.1007/s11663-020-01982-x10.1007/s11663-020-01982-x ↗
37. 10.1007/s11661-000-0285-x10.1007/s11661-000-0285-x ↗
38. 10.1007/s10973-014-4302-510.1007/s10973-014-4302-5 ↗