journal article·2016-11

Investigation of High-strength Lead-free Machinable Cu40Zn Duplex Graphite Brasses by Powder Metallurgy

S. Li, H. Imai, J. Umeda, Y. Fu, K. Kondoh

Materials Science and Technology· Volume 32· Issue 17
Publisher page

Abstract

Graphite was proposed as candidate to substitute lead for increasing machinability of Cu40Zn brass in this study. Cr, Fe, Ti and Sn were used as trace alloying elements to improve the mechanical properties and strengthen graphite/brass boundary bonding. The brass powder prepared by water atomisation process were premixed with graphite particles and consolidated by warm compact. The sintered billet was hot extruded to increase density and improve microstructure. The super-saturated solid solution of alloying elements precipitated in form of nano/micro scale particles in the subsequent hot working. Graphite particles with appreciate content can improve machinability effectively without deteriorating the mechanical properties. Graphite content and hot working temperatures are essential parameters which affect machinability and mechanical properties of the graphite brasses. This paper is part of a Themed Issue on Brass Alloys.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Science · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Xian University of Technology, No. 5 Jinhua South Road, Xian 710048, China

Joining and Welding Research Institute, Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 5670047, Japan

School of Physics and Electronic Engineering, Taizhou University, Taizhou 318000, China

References (30)

Show source-provided references
1. European restriction of the use of certain hazardous substances in electrical and electronic equipment, Official Journal L 037, 13/02/2003 P. 0019–0023, http://eur-lex.europa.eu/legal content/EN/TXT/?uri=CELEX:32002L0095.
2. 10.1016/j.jallcom.2009.12.12610.1016/j.jallcom.2009.12.126 ↗
3. Whiting L. · AFS Trans. · 1995 · 103 · 683
4. Peter D. · Mod. Cast. · 1997 · 87
5. Kondoh K., Kosaka Y., Okuyama M., and Kojima A.: Collected Abstracts of 46th technology conference of Japan Copper and Brass Association, 2006, 153–154.
6. Sigal A. · AFS Trans. · 1996 · 104 · 225
7. 10.1016/j.jmatprotec.2005.05.03510.1016/j.jmatprotec.2005.05.035 ↗
8. 10.1016/j.diamond.2006.03.00710.1016/j.diamond.2006.03.007 ↗
9. 10.1016/j.wear.2009.01.02610.1016/j.wear.2009.01.026 ↗
10. 10.1016/j.compscitech.2006.05.01310.1016/j.compscitech.2006.05.013 ↗
11. Kobayashi T. · J. JRICu · 2003 · 42 · 217
12. 10.1016/j.powtec.2009.12.01010.1016/j.powtec.2009.12.010 ↗
13. ASM: ‘Metals handbook, alloy phase diagrams, ASM handbook’, 10th edn, Vol. 3, 1990, OH, ASM.
14. 10.1023/A:101241460516310.1023/A:1012414605163 ↗
15. 10.1016/j.msea.2006.01.06810.1016/j.msea.2006.01.068 ↗
16. 10.1016/0025-5416(76)90104-X10.1016/0025-5416(76)90104-X ↗
17. Liu P. · J. Mater. Sci. Technol. · 2005 · 21 · 475
18. 10.1023/A:101791693045910.1023/A:1017916930459 ↗
19. Artens A. · Mater. Forum · 1997 · 21 · 57
20. 10.1016/0001-6160(75)90125-X10.1016/0001-6160(75)90125-X ↗
21. 10.1016/0036-9748(84)90102-910.1016/0036-9748(84)90102-9 ↗
22. Kumar K. C. H. · Z. Metall. · 1996 · 87 · 666
23. 10.31399/asm.tb.aub.978162708297610.31399/asm.tb.aub.9781627082976 ↗
24. 10.2320/matertrans.M201105110.2320/matertrans.M2011051 ↗
25. Mao W. · Front. Mater. Sci. China · 2008 · 2
26. 10.1016/S1006-706X(10)60050-710.1016/S1006-706X(10)60050-7 ↗
27. 10.1007/BF0267555910.1007/BF02675559 ↗
28. 10.1016/j.matchemphys.2012.05.03910.1016/j.matchemphys.2012.05.039 ↗
29. 10.1016/j.msea.2012.08.06210.1016/j.msea.2012.08.062 ↗
30. Katsuyoshi K., Hisashi I., Li S., and Kosaka Y. ‘Study of lead-free and machinable high-strength P/M brass alloys (In Japanese)’, Proceedings of Spring Meeting of JSMP.111, Tokyo, May 27–29, 2013.