journal article·2009-08

Study of fractional softening of AZ31 magnesium alloy under multistage hot deformation

M. Shamsi, M. Sanjari, A. Zarei Hanzaki

Materials Science and Technology· Volume 25· Issue 8
Publisher page

Abstract

In the present study flow softening behaviour of AZ31 magnesium alloy was investigated by double hit compression tests in the temperature range 250–400°C and strain rate range 10–3–10–1 s–1. The tests were conducted with delay times varying 4–250 s after achieving the critical strain ϵc in each deformation condition. It has been found that static restoration processes (recovery and recrystallisation) were intensely depended on strain rate and deformation temperature. Fractional softening values increased with increasing strain rate and deformation temperature. Accordingly the softening curves were divided into three regions. The softening in the short interpass times was attributed to the occurrence of static recovery and followed by static recrystallisation and grain growth as dominant softening mechanisms for the second and third regions respectively. In addition static recrystallisation kinetics was interpreted by Avrami equation. Analysis of the results indicated that Avrami constant was changed by varying temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Metallurgy and MaterialsUniversity of Tehran, Tehran, Iran

Materials and Energy Research CenterTehran, Iran;, Email: m.sanjari@gmail.com

References (27)

Show source-provided references
1. Avedisian M. M., and Baker H.: in ‘ASM specialty handbook’,Vol. 2, ‘Magnesium and Magnesium alloys’; 2000, Materials Park, OH, ASM.
2. 10.1016/S0924-0136(01)00779-810.1016/S0924-0136(01)00779-8 ↗
3. 10.1016/S0924-0136(01)00780-410.1016/S0924-0136(01)00780-4 ↗
4. Wang L. Y. · Trans. Nonferr. Met. Soc. Chn · 2003 · 13 · 335
5. 10.1016/j.jmatprotec.2005.02.02410.1016/j.jmatprotec.2005.02.024 ↗
6. 10.1016/S1471-5317(01)00010-410.1016/S1471-5317(01)00010-4 ↗
7. Meyeres M. A., Vohringer O., and Lubarda V. A.: Acta Mater. 2001, 49, 4025–4039.10.1016/S1359-6454(01)00300-7 ↗
8. 10.1016/S1359-6462(97)00344-810.1016/S1359-6462(97)00344-8 ↗
9. Barnett M. R: Mater. Trans., 2003, 44,571–577.10.2320/matertrans.44.571 ↗
10. 10.1007/s11661-006-0132-910.1007/s11661-006-0132-9 ↗
11. Yanagida A. · Mater. Sci. Eng. A
12. Humphreys F. J., and Hatherly M. ‘Recrystallization and related annealing phenomena'; 1996, Oxford, Pergamon.10.1016/B978-0-08-041884-1.50017-9 ↗
13. 10.1016/S0924-0136(97)00414-710.1016/S0924-0136(97)00414-7 ↗
14. Annual Book of ASTM Standards, Section 3: 03.01, E112-96, American Society of Testing and Materials, Philadelphia, PA, USA, 1998, 229.
15. Ryan N. D., and McQueen H. J.: Can Metall Q. 1990, 29, 147–162.10.1179/cmq.1990.29.2.147 ↗
16. 10.2355/isijinternational.32.44010.2355/isijinternational.32.440 ↗
17. 10.4028/www.scientific.net/MSF.426-432.51510.4028/www.scientific.net/MSF.426-432.515 ↗
18. Mecking H., and Kocks U. F.: Acta Metall. 1981, 29, 1865–75.10.1016/0001-6160(81)90112-7 ↗
19. Sang-hung C. · J. Mater. Sc
20. Amin R. K., and Pickering F. B. ‘Thermomechanical processing of microalloyed austenite’, (ed. A. J. Deardo, G. A. Ratz), 1; 1982, Warrendale, PA, TMS/AIME.
21. Roberts W.: Proc. 7th Int. Conf. on ‘Strength of metals and alloys’, (ed.McQueen H. J. et al.), 3; 1985, New York, Pergamon.
22. 10.1179/mst.1990.6.11.107210.1179/mst.1990.6.11.1072 ↗
23. 10.1002/adem.20040041810.1002/adem.200400418 ↗
24. Pentti Karjalainen L., and Perttula J.: ISIJ Int. 1996, 36, 729–736.10.2355/isijinternational.36.729 ↗
25. Ishikawa K. · J. Mater. Sc
26. 10.2320/matertrans.42.192810.2320/matertrans.42.1928 ↗
27. 10.4028/www.scientific.net/MSF.419-422.52110.4028/www.scientific.net/MSF.419-422.521 ↗