Low temperature aluminisation of alloy steels by pack cementation process
Source abstract
Abstract
The pack aluminisation process is normally applied at temperatures >973 K at which the mechanical properties of alloy steels would degrade. Thus, the present study was undertaken to apply this process to aluminising the alloy steels at temperatures <973 K in order to increase their high temperature oxidation resistance while maintaining their microstructure and hence mechanical strength and creep resistance. A type of commercial alloy steel P92 (9Cr–1Mo) was used for the present study. Pack powder mixtures consisting of Al, AlCl3 (anhydrous) or NH4Cl and Al2O3 were used to carry out the process. The aluminising temperature was varied from 773 to 973 K, pack Al content from 1 to 30 wt-% and aluminising time from 1 to 16 h to investigate their effects on the coating growth kinetics in the AlCl3 activated packs. It was observed that all the coatings formed in the AlCl3 activated packs were of a single layer structure with Fe2Al5 as the main coating phase. It was established that the interrelationship between the thickness h (in μm) of this coating layer and aluminising temperature T (in K), time t (in h) and pack Al content W (in wt-%) can be described by h=83005·9 W1/2 t1/2 e−73330/( RT). In the NH4Cl activated packs, it was found that coating formation and dissolution took place simultaneously at 923 K and stable growth of a coating layer was only possible when the pack Al content was sufficiently high. However, the coatings formed in these packs had highly uneven regions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. 10.1361/10599490177034539410.1361/105994901770345394 ↗
2. Thornton D. V., and Meyer K. H.: in ‘Advanced heat resistant steels for power generation’, (ed.Viswanathan R., and Nutting J. W.), 349-365; 1999, London, IOM Communications Ltd.
3. Aguero A., Garciade Blas J., Muelas R., Sanchez A., and Tripas S.: Mater. Sci. Forum, 2001, 369-372,939–946.10.4028/www.scientific.net/MSF.369-372.939 ↗
4. 10.7567/JJAPS.24S2.13410.7567/JJAPS.24S2.134 ↗
5. 10.1016/S0921-5093(98)00924-110.1016/S0921-5093(98)00924-1 ↗
6. 10.1179/mst.1986.2.3.20110.1179/mst.1986.2.3.201 ↗
7. 10.1023/A:102591581292810.1023/A:1025915812928 ↗
8. 10.1023/A:101253422016510.1023/A:1012534220165 ↗
9. 10.1179/02670840110151789010.1179/026708401101517890 ↗
10. 10.1007/BF0035444510.1007/BF00354445 ↗
11. Soliman H. M. · J. Mater. Sci. Technol · 1997 · 13 · 383
12. 10.1016/S0257-8972(98)00529-510.1016/S0257-8972(98)00529-5 ↗
13. 10.1149/1.209573210.1149/1.2095732 ↗
14. 10.1016/0956-7151(95)00022-N10.1016/0956-7151(95)00022-N ↗
15. 10.1016/S1359-6454(97)00176-610.1016/S1359-6454(97)00176-6 ↗
16. 10.1179/02670830422502223210.1179/026708304225022232 ↗
17. 10.1016/0040-6090(80)90501-510.1016/0040-6090(80)90501-5 ↗
18. 10.1016/j.surfcoat.2003.10.04610.1016/j.surfcoat.2003.10.046 ↗
19. 10.1149/1.240197610.1149/1.2401976 ↗
20. 10.1016/0921-5093(89)90428-010.1016/0921-5093(89)90428-0 ↗
21. 10.1179/02670830422501128910.1179/026708304225011289 ↗