journal article·2023-11

Rotary friction welding of Inconel 718 – AISI 304 stainless steel dissimilar joint

V. Ajay, M. Naveen Kumar, N. Kishore Babu, T. Mahesh Kumar, K. Vamshi Krishna, G. Madhusudan Reddy

Materials Science and Technology· Volume 39· Issue 15
Publisher page

Abstract

Nickel-based superalloy Inconel 718 and austenitic stainless steel AISI 304 are joined by rotary friction welding. The changes in microstructure and mechanical properties of the dissimilar joint for solutionising, solutionising + aging, and post-weld aging treatment, with a prior solution heat treatment, are studied. Two distinct microstructural zones, the FDZ (fully deformed zone) and the TMAZ (thermo-mechanically affected zone) are observed in all weldments. The post-weld aged joint sample shows the highest tensile strength and hardness due to the precipitation of γ′ (Ni 3 (Ti, Al)) and γ ″ (Ni 3 Nb) strengthening precipitates. The solution-treated sample shows the highest yield strength, while the solutionising + aging treatment is found to deteriorate the mechanical properties of the dissimilar joint. The observed changes in the mechanical properties are investigated based on microstructure and electron dispersive spectroscopy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical and Materials Engineering, National Institute of Technology - Warangal, Hanamkonda, India

Defence Metallurgical Research Laboratory, Hyderabad, India

References (35)

Show source-provided references
1. Roder O, Albrecht J, Lütjering G. Microstructure and mechanical properties of an inertia friction welded INCOLOY alloy 909 - INCONEL alloy 718 joint for rotating applications. Mater High Temp. 2006;23:171–177.
2. Lingenfelter A. Welding of Inconel alloy 718: a historical overview. A lingenfelter: ‘welding of IN 718: A historical overview’. In: Loria EA, editor. Conference proceedings on superalloy 718 – metallurgy and applications; warrendale, TMSAIME, 1989 673-683. Warrendale, PA: TMS; 1989, p. 673–683.
3. 10.1081/AMP-12003865710.1081/AMP-120038657 ↗
4. 10.1007/s12666-021-02345-z10.1007/s12666-021-02345-z ↗
5. 10.1179/13621710422502178810.1179/136217104225021788 ↗
6. 10.1007/s11661-018-4469-710.1007/s11661-018-4469-7 ↗
7. 10.1007/s11661-001-0350-010.1007/s11661-001-0350-0 ↗
8. 10.1179/13621710110153881110.1179/136217101101538811 ↗
9. 10.1007/s11661-019-05226-910.1007/s11661-019-05226-9 ↗
10. 10.3390/met811086310.3390/met8110863 ↗
11. Kearns WH. Diffusion welding and brazing. Welding handbook; 1980.10.1007/978-1-349-04961-5 ↗
12. Sassani R, NeelamJR Friction welding of incompatible materials. Weld J. 1988;67:264–270.
13. 10.1016/j.jmatprotec.2006.11.12310.1016/j.jmatprotec.2006.11.123 ↗
14. Nunn ME. Aeroengine improvements through linear friction welding Proceedings of 1st International Conference on ‘Innovation and integration in aerospace sciences’ Paper no 2005–0040 Belfast UK August 2005 CEIAT. ME Nunn.pdf.
15. 10.1002/adem.20070036110.1002/adem.200700361 ↗
16. 10.1016/j.jmrt.2013.12.00110.1016/j.jmrt.2013.12.001 ↗
17. 10.1179/174328407X17977310.1179/174328407X179773 ↗
18. 10.1016/j.jmatprotec.2011.08.00510.1016/j.jmatprotec.2011.08.005 ↗
19. 10.1007/s11661-015-2752-410.1007/s11661-015-2752-4 ↗
20. 10.4028/www.scientific.net/KEM.345-346.142910.4028/www.scientific.net/KEM.345-346.1429 ↗
21. 10.1007/s13632-018-0447-010.1007/s13632-018-0447-0 ↗
22. 10.1016/j.matpr.2020.03.04010.1016/j.matpr.2020.03.040 ↗
23. 10.1007/s00170-019-03611-710.1007/s00170-019-03611-7 ↗
24. Gobu N, Mahadevan K. Evaluation of mechanical and metallurgical properties of friction welded Inconel 600 and AISI 304L austenitic stainless steel dissimilar joints. J Manuf Eng. 2016;11:171–177.
25. Shik KS, Kong YS, Kim SJ On dissimilar friction welded joints (STS316L/IN X-750) of turning vane bolt. Proc Korean Soc Ocean Resour Eng Conf. 2004: 331–336.
26. 10.1007/s10853-009-3691-510.1007/s10853-009-3691-5 ↗
27. 10.1016/j.matdes.2013.07.09110.1016/j.matdes.2013.07.091 ↗
28. 10.1179/174328408X36938410.1179/174328408X369384 ↗
29. Kim NY, Kim JH, Kong YS The effect of post weld heat treatment on mechanical properties of friction-welded alloy 718 and SNCRW stainless steel. Adv Mat Res. 2007;26–28:511–514.
30. 10.1179/174329307X24933310.1179/174329307X249333 ↗
31. 10.1007/s11661-014-2480-110.1007/s11661-014-2480-1 ↗
32. 10.3390/met1101010910.3390/met11010109 ↗
33. 10.1016/j.cirpj.2022.12.00610.1016/j.cirpj.2022.12.006 ↗
34. 10.1007/s12666-020-01921-z10.1007/s12666-020-01921-z ↗
35. Tamang S Pandey A Aravindan S. Dissimilar joining of stainless steel (SS304) and Inconel 718. 2020;09:13–19.