journal article·2024-04Open access

Microstructure effect on sliding wear of 316L stainless steel selectively laser melted

Germán Omar Barrionuevo, Magdalena Walczak, Jorge Ramos-Grez, Patricio Mendez, Alexis Debut

Materials Science and Technology· Volume 40· Issue 6

Abstract

Due to varying thermal cycles, the resulting microstructure of metal additive manufacturing differs from the conventionally processed counterpart alloys. Since the mechanical properties depend on the microstructure, the wear resistance of components manufactured by laser powder bed fusion (LPBF) is determined by the processing parameters. This work focuses on microhardness and sliding wear of 316L stainless steel, evaluated nanoindentation and pin-on-disc, respectively, analysed through optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) and glow discharge emission spectrometry (GDOES). The results show that the LPBF-processed specimens have about 40% higher microhardness and ca. 30% lower wear rate than the wrought counterpart. The enhanced sliding wear resistance is associated with the higher density of dislocations at the cellular subgrain boundaries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Metallurgical Engineering, School of Engineering, Pontificia Universidad Católica de Chile, Santiago, Chile

Departamento de Ciencias de la Energía y Mecánica, Universidad de las Fuerzas Armadas ESPE, Sangolquí, Ecuador

Research Center for Nanotechnology and Advanced Materials (CIEN-UC), Macul Santiago, Chile

Chemical and Materials Engineering Department, University of Alberta, Edmonton, Alberta, Canada

Centro de Nanociencia y Nanotecnologia, Universidad de las Fuerzas Armadas ESPE, Sangolquí, Ecuador

References (51)

Show source-provided references
1. Bergström D. The absorptance of metallic alloys to Nd:YAG and Nd:YLF laser light . Thesis, 2005, p.149.
2. 10.1007/s10853-020-05109-010.1007/s10853-020-05109-0 ↗
3. 10.1016/j.jmapro.2019.07.01010.1016/j.jmapro.2019.07.010 ↗
4. 10.1016/j.jmrt.2020.06.09010.1016/j.jmrt.2020.06.090 ↗
5. 10.1631/jzus.A170032810.1631/jzus.A1700328 ↗
6. 10.1063/1.172144810.1063/1.1721448 ↗
7. 10.1016/j.cirpj.2023.03.00210.1016/j.cirpj.2023.03.002 ↗
8. 10.1007/s11665-013-0784-810.1007/s11665-013-0784-8 ↗
9. 10.1557/jmr.2016.13210.1557/jmr.2016.132 ↗
10. 10.1016/j.matlet.2020.12769910.1016/j.matlet.2020.127699 ↗
11. 10.1016/j.jallcom.2016.04.15610.1016/j.jallcom.2016.04.156 ↗
12. 10.1016/j.vacuum.2017.10.02710.1016/j.vacuum.2017.10.027 ↗
13. 10.1016/j.triboint.2019.04.03810.1016/j.triboint.2019.04.038 ↗
14. 10.1016/j.triboint.2018.07.02110.1016/j.triboint.2018.07.021 ↗
15. Yang Y · Addit Manuf · 2020 · 36
16. 10.1016/j.msea.2021.14118710.1016/j.msea.2021.141187 ↗
17. 10.1016/j.matchemphys.2020.12348710.1016/j.matchemphys.2020.123487 ↗
18. 10.1016/j.matlet.2019.01.01510.1016/j.matlet.2019.01.015 ↗
19. 10.1007/s11665-021-05730-310.1007/s11665-021-05730-3 ↗
20. 10.1016/j.matpr.2022.07.11210.1016/j.matpr.2022.07.112 ↗
21. 10.1016/j.wear.2021.20419310.1016/j.wear.2021.204193 ↗
22. García-León RA, Martínez-Trinidad J, Zepeda-Bautista R, et al. Dry sliding wear test on borided AISI 316L stainless steel under ball-on-flat configuration: a statistical analysis. Tribol Int 2021; 157. DOI: https://doi.org/10.1016/j.triboint.2021.106885.10.1016/j.triboint.2021.106885 ↗
23. 10.1016/j.actamat.2021.11686210.1016/j.actamat.2021.116862 ↗
24. Liu Y · Addit Manuf · 2021 · 48
25. 10.1016/j.matpr.2021.10.20910.1016/j.matpr.2021.10.209 ↗
26. 10.1016/j.jallcom.2019.03.08210.1016/j.jallcom.2019.03.082 ↗
27. 10.1016/j.scriptamat.2010.08.05810.1016/j.scriptamat.2010.08.058 ↗
28. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
29. 10.1007/s11663-014-0054-710.1007/s11663-014-0054-7 ↗
30. 10.2351/1.508520610.2351/1.5085206 ↗
31. Barrionuevo GO · Rapid Prototyp J · 2022
32. 10.1016/j.msea.2014.12.01810.1016/j.msea.2014.12.018 ↗
33. 10.1016/B978-0-12-824090-8.00026-310.1016/B978-0-12-824090-8.00026-3 ↗
34. 10.1016/j.msea.2020.14027910.1016/j.msea.2020.140279 ↗
35. 10.1016/j.jmatprotec.2020.11687810.1016/j.jmatprotec.2020.116878 ↗
36. 10.1016/j.surfcoat.2020.12617810.1016/j.surfcoat.2020.126178 ↗
37. 10.1016/j.msea.2019.13845510.1016/j.msea.2019.138455 ↗
38. 10.3390/ma1502055110.3390/ma15020551 ↗
39. 10.1016/j.jallcom.2016.09.12310.1016/j.jallcom.2016.09.123 ↗
40. 10.1016/j.wear.2020.20343710.1016/j.wear.2020.203437 ↗
41. 10.1016/j.wear.2020.20349310.1016/j.wear.2020.203493 ↗
42. 10.1016/j.matlet.2019.02.04710.1016/j.matlet.2019.02.047 ↗
43. 10.1016/j.addma.2021.10226310.1016/j.addma.2021.102263 ↗
44. 10.1007/s00170-019-04136-910.1007/s00170-019-04136-9 ↗
45. 10.1016/B978-0-08-096672-4.00003-710.1016/B978-0-08-096672-4.00003-7 ↗
46. 10.1016/j.mechmat.2020.10347810.1016/j.mechmat.2020.103478 ↗
47. 10.1016/j.msea.2010.06.02010.1016/j.msea.2010.06.020 ↗
48. 10.1016/j.actamat.2020.07.06310.1016/j.actamat.2020.07.063 ↗
49. 10.1557/s43578-020-00096-z10.1557/s43578-020-00096-z ↗
50. 10.1016/j.matchar.2021.11102010.1016/j.matchar.2021.111020 ↗
51. 10.1016/j.wear.2019.04.00110.1016/j.wear.2019.04.001 ↗