Deformation and fracture in (0001) and (10-10) GaN single crystals
Source abstract
Abstract
Indentation techniques were utilised to induce deformation on polar (0001) c-plane and non-polar [Formula: see text] m-plane GaN single crystal. Cracking was more sensitively dependent on the orientation of the indenter tip, compared to hardness. The indentation-induced plastic deformation and fracture sequences were studied by cathodoluminescence imaging and optical microscopy, respectively. Polar GaN was harder than non-polar, while pop-in discontinuities occurred at lower loads in polar than non-polar GaN. Dislocation arrangements were more isotropic at the polar than the non-polar orientation. Polar GaN was more susceptible to cracking compared to non-polar. Indentation at the high load regime fostered radial and lateral crack formation at both indenter orientations in polar GaN. Post-indentation lateral crack propagation was observed in situ in polar GaN. This is part of a thematic issue on Nanoscale Materials Characterisation and Modeling by Advances Microscopy Methods - EUROMAT.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · GaN-based semiconductor devices and materials · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Applied Sciences, Technological Educational Institute of Thessaloniki, Thessaloniki, Greece
Department of Physics, Aristotle University of Thessaloniki, Thessaloniki, Greece
Institut für Nichtmetallische Werkstoffe, Technische Universität Clausthal, Clausthal-Zellerfeld, Germany
Interdisziplinäres Zentrum für Materialwissenschaften, Martin-Luther-Universität Halle-Wittenberg, Halle, Germany
Freiberger Compound Materials GmbH, Freiberg, Germany
References (39)
Show source-provided references
1. 10.1063/1.165284510.1063/1.1652845 ↗
2. 10.1063/1.12004410.1063/1.120044 ↗
3. 10.1063/1.11786510.1063/1.117865 ↗
4. 10.1007/s11664-003-0132-010.1007/s11664-003-0132-0 ↗
5. 10.1080/0141861020823573210.1080/01418610208235732 ↗
6. 10.1002/pssa.20120054210.1002/pssa.201200542 ↗
7. 10.1063/1.12491910.1063/1.124919 ↗
8. 10.1016/S0022-0248(98)00262-010.1016/S0022-0248(98)00262-0 ↗
9. Kuramata A · Fujitsu Sci Techn J · 1998 · 34 · 192
10. 10.1063/1.143628010.1063/1.1436280 ↗
11. 10.1016/j.apsusc.2008.04.07810.1016/j.apsusc.2008.04.078 ↗
12. 10.1063/1.359338110.1063/1.3593381 ↗
13. 10.1016/j.apsusc.2009.12.05410.1016/j.apsusc.2009.12.054 ↗
14. 10.1002/pssc.20108402010.1002/pssc.201084020 ↗
15. 10.1088/1742-6596/281/1/01200710.1088/1742-6596/281/1/012007 ↗
16. 10.1002/pssc.20120038810.1002/pssc.201200388 ↗
17. 10.1016/S0921-5107(00)00656-510.1016/S0921-5107(00)00656-5 ↗
18. 10.1063/1.151879310.1063/1.1518793 ↗
19. 10.1186/1556-276X-7-15010.1186/1556-276X-7-150 ↗
20. 10.1007/s11671-009-9310-110.1007/s11671-009-9310-1 ↗
21. Yokogawa T · Mechan Behav Fail Mater · 2016 · 1 · 3847
22. 10.1016/j.jcrysgro.2011.12.04310.1016/j.jcrysgro.2011.12.043 ↗
23. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
24. Metallic materials – Instrumented indentation test for hardness and materials parameters. ISO 14577–1: International Organization for Standardization; 2002.
25. 10.1016/S0022-5096(97)00086-010.1016/S0022-5096(97)00086-0 ↗
26. 10.1520/MNL46-EB10.1520/MNL46-EB ↗
27. 10.1111/j.1151-2916.2003.tb03319.x10.1111/j.1151-2916.2003.tb03319.x ↗
28. 10.1023/A:101867182305910.1023/A:1018671823059 ↗
29. Garfinkle M · Trans TMS-AIME · 1968 · 242 · 809
30. 10.1088/0953-8984/12/49/32410.1088/0953-8984/12/49/324 ↗
31. 10.1063/1.473741610.1063/1.4737416 ↗
32. Fujikura H, Yoshida T, Shibata M, Recent progress of high-quality GaN substrates by HVPE method. SPIE Proc. 1010403; 2017.10.1117/12.2257202 ↗
33. 10.1016/j.tsf.2006.08.03210.1016/j.tsf.2006.08.032 ↗
34. 10.1088/0022-3727/40/13/01110.1088/0022-3727/40/13/011 ↗
35. 10.1007/s11671-008-9130-810.1007/s11671-008-9130-8 ↗
36. 10.1016/j.optmat.2013.08.01110.1016/j.optmat.2013.08.011 ↗
37. 10.1016/j.jeurceramsoc.2011.04.01210.1016/j.jeurceramsoc.2011.04.012 ↗
38. 10.1063/1.476737210.1063/1.4767372 ↗
39. 10.1016/0956-7151(94)00392-U10.1016/0956-7151(94)00392-U ↗