Study on copper precipitation during continuous heating and cooling of HSLA steels using electrical resistivity
Source abstract
Abstract
Electrical resistivity technique was used to study the phase transformation and copper precipitation during continuous heating and cooling of three Cu bearing high strength low alloy (HSLA) steels. Dilatation measurements were performed to compare the results with the resistivity. During heating, the dilatation plot revealed Ac1 and Ac3 temperature, while resistivity measurements indicated precipitation of copper in the range of 370–550°C. A method was demonstrated to estimate the amount of copper precipitation during continuous heating. During continuous cooling, the austenite transformation temperatures could be derived from resistivity, which compare well with dilatometry. A hysteresis between heating and cooling curve was noted possibly owing to formation of bainite during cooling. Non-isothermal kinetic analysis of dilatation data during continuous cooling yields an activation energy of 62 kJ mol−1, which could be related to the formation of bainite, whereas higher activation energy of 237 kJ mol−1 obtained from resistivity data may correspond to the diffusion of Cu in iron, associated with the copper precipitation during austenite transformation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Czyryca E. J.: Proc. Conf. on ‘Advances in low carbon high strength ferrous alloys’, (ed.Mohanty O. N. et al),Vol. 84-85, 491; 1993, Switzerland, Trans. Tech. Pub.
2. Mujahid M., Lis A. K., Gracia C. I., and DeArdo A. J.: Proc. Conf. on ‘Advances in low carbon high strength ferrous alloys’, (ed.Mohanty O. N. et al), Vol. 84-85, 209; 1993, Switzerland, Trans. Tech. Pub.
3. Hornbogen E. · Trans. ASM · 1964 · 57 · 120
4. 10.1007/BF0266937710.1007/BF02669377 ↗
5. 10.1016/0001-6160(72)90091-010.1016/0001-6160(72)90091-0 ↗
6. Deschamps A., Militzer M., and Poole W. J.: ISIJ Int. 2001, 41,196.10.2355/isijinternational.41.196 ↗
7. Osamura K., Okuda H., Takashima M., Asano K., and Furusaka M.: JIM. 1993, 34, 305.10.2320/matertrans1989.34.305 ↗
8. Hornbogen E. · Trans Met. Soc. AIME · 1960 · 218 · 1064
9. 10.1007/BF0264385410.1007/BF02643854 ↗
10. 10.1016/0956-716X(92)90436-I10.1016/0956-716X(92)90436-I ↗
11. Pande C. S., Imam M. A., Vold C. L., Dantsker E., and Rath B. B.: Proc. Conf. on ‘Advances in low carbon high strength ferrous alloys’, (ed.Mohanty O. N. et al), Vol. 84-85, 145; 1993, Switzerland, Trans. Tech. Pub.10.4028/www.scientific.net/KEM.84-85.145 ↗
12. 10.1007/BF0264981610.1007/BF02649816 ↗
13. Dunne D. P., Banadkouki Ghasemi S. S., and Yu D.: ISIJ Int. 1996, 36, 324.10.2355/isijinternational.36.324 ↗
14. Banadkouki Ghasemi S. S., Yu D., and Dunne D. P.: ISIJ Int. 1996, 36, 61.10.2355/isijinternational.36.61 ↗
15. 10.1016/1044-5803(93)90073-510.1016/1044-5803(93)90073-5 ↗
16. Thompson S. W.: Proc. 40th Conf. on ‘Mechanical working and steel processing’, Warrendale, PA, USA, October 1998, Iron and Steel Society, 663.
17. Peter D. T. · Trans. AIME · 1966 · 236 · 1420
18. Simoneau R. · Met. Set · 1978 · 12 · 381
19. Ahmad M., Farooque M., Hasmi F. H., Hussain S. W., and Khan A. Q. ‘Maraging steels, recent development and applications’, (ed.Wilson R. K.), 269; 1988, Warrendale, PA, TMS-AIME.
20. Mohanty O. N.: Mater. Sci. Eng. B, 1995, B22, 267.10.1016/0921-5107(95)03017-4 ↗
21. 10.1179/02670830322500975110.1179/026708303225009751 ↗
22. Norbury A. L. · JISI · 1920 · 101 · 627
23. Sisco F. T. ‘The alloy of iron and carbon, alloy of iron reserach’, 1st edn, 589; 1937, New York, McGraw Hill.
24. Bungardt V. K., and Spyra W.: Arechiv fiir das Eisenhuttenwesen, April 1965, 257.10.1002/srin.196504080 ↗
25. Kubaschewski O. ‘Iron-binary phase diagram’, 24, 32, 37, 75; 1982, Berlin, Heidelberg, Springer-Verlag.
26. Bhagat A. N. · 2002
27. 10.1016/S1359-6462(98)00138-910.1016/S1359-6462(98)00138-9 ↗
28. 10.2320/matertrans1960.17.29410.2320/matertrans1960.17.294 ↗
29. 10.1063/1.175087210.1063/1.1750872 ↗
30. Johnson W. A. · Trans. AIME · 1939 · 135 · 416
31. 10.1034/j.1600-0692.2001.d01-32.x10.1034/j.1600-0692.2001.d01-32.x ↗
32. Jena A. K., and Chatuvedi M. C. ‘The phase transformations in materials’, 103; 1992, New Jersey, Prentice Hall.
33. Wilson E. A. ‘Worked examples in the kinetics and thermo-dynamics of phase transformation’, 50; 1976, London, The Institution of Metallurgists.
34. Radcliffe S. V. · JISI · 1959 · 191 · 56
35. Braades E. A., and Brook G. B. ‘Smithells metal reference book’, 7th edn, 13-19; 1992, Oxford, Educational and Professional Publishing Ltd.