An overview on the microstructure and properties of Fe/Ti based dissimilar joints
Source abstract
Abstract
Joining of Ti and Fe-based alloys is challenging due to the formation of deleterious phases at the interface. Since fusion welding is unsuitable for the purpose, over the years, many solid-state welding techniques have been tried. This review provides a comparison of different solid-state joining methods used for Fe/Ti alloys with focus on the structural transformations in base materials, effect of process parameters on interface microstructure, its evolution and kinetics with thermal aging and structure–property correlation. Structural transformations in diffusion couples (near-equilibrium condition) are compared with those in weldments and a perspective is provided on the role of defects and alloying additions in enhancing/retarding reaction zone formation under both equilibrium and non-equilibrium conditions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, India
Homi Bhabha National Institute (HBNI), Kalpakkam, India
References (100+)
Show source-provided references
1. 10.1016/j.pnucene.2005.07.00110.1016/j.pnucene.2005.07.001 ↗
2. Natarajan R. Challenges in fast reactor fuel reprocessing. IANCAS Bull. 1998;14:27–32. https://www.iancas.org.in/bulletins/8.pdf
3. Rajamani N, , Baldev R. Technology development of fast reactor fuel reprocessing in India. Current Sci. 2015;108:30–38.
4. 10.1007/BF0270350510.1007/BF02703505 ↗
5. 10.1016/S0022-3115(03)00194-610.1016/S0022-3115(03)00194-6 ↗
6. 10.1007/BF0286828610.1007/BF02868286 ↗
7. Schutz RW, , Thomas DE. Corrosion of titanium and titanium alloys. USA: ASM Handbook.
8. 10.1016/j.jnucmat.2007.03.21610.1016/j.jnucmat.2007.03.216 ↗
9. 10.1016/0010-938X(90)90119-P10.1016/0010-938X(90)90119-P ↗
10. 10.1016/0022-3115(93)90432-X10.1016/0022-3115(93)90432-X ↗
11. Takeuchi M Sano Y Nakajima Y . Corrosion study of titanium-5% tantalum alloy in hot nitric acid condensate. Proceeding of 20th National Conference on Nuclear Engineering 2012 July 30th-August 3rd; ICONE20-POWER2012-54850.
12. 10.1016/S0022-3115(03)00302-710.1016/S0022-3115(03)00302-7 ↗
13. 10.1016/j.jnucmat.2005.05.00710.1016/j.jnucmat.2005.05.007 ↗
14. 10.1179/02670830422501208010.1179/026708304225012080 ↗
15. 10.1016/j.calphad.2016.12.00710.1016/j.calphad.2016.12.007 ↗
16. 10.1016/j.intermet.2009.08.00810.1016/j.intermet.2009.08.008 ↗
17. 10.1016/j.jallcom.2004.12.01710.1016/j.jallcom.2004.12.017 ↗
18. 10.1179/mst.1993.9.8.63310.1179/mst.1993.9.8.633 ↗
19. 10.1016/S1359-6462(96)00414-910.1016/S1359-6462(96)00414-9 ↗
20. 10.2320/matertrans.44.8310.2320/matertrans.44.83 ↗
21. 10.1016/S0022-3115(98)00179-210.1016/S0022-3115(98)00179-2 ↗
22. 10.1016/j.jallcom.2019.15172610.1016/j.jallcom.2019.151726 ↗
23. Raghavan V. Phase diagrams of ternary iron alloys. Part I. Delhi: IIT; 1987.
24. 10.1016/0001-6160(69)90131-X10.1016/0001-6160(69)90131-X ↗
25. Sudha C. Study of mass transport across microstructural and microchemical gradients in Fe, Ni and Ti based alloys [Ph.D thesis]. 2010, IIT Madras.
26. 10.1016/j.intermet.2005.11.02810.1016/j.intermet.2005.11.028 ↗
27. 10.1016/S0921-5093(97)00783-110.1016/S0921-5093(97)00783-1 ↗
28. Bania PJ. In: Eylon D, , Boyer RR, , Koss DA, editors. Beta titanium alloys in the 1990s. USA: The Minerals, Metals and Materials Society; 1993. p. 3. ISBN: 0-87339-200-0.
29. 10.1016/j.jmatprotec.2018.02.02010.1016/j.jmatprotec.2018.02.020 ↗
30. 10.1016/j.jmapro.2018.12.01610.1016/j.jmapro.2018.12.016 ↗
31. 10.1016/j.procir.2018.08.13810.1016/j.procir.2018.08.138 ↗
32. 10.1016/j.matdes.2013.07.04410.1016/j.matdes.2013.07.044 ↗
33. 10.1016/j.matlet.2018.08.01410.1016/j.matlet.2018.08.014 ↗
34. 10.1016/j.intermet.2011.05.01610.1016/j.intermet.2011.05.016 ↗
35. 10.1179/1362171812Y.000000000210.1179/1362171812Y.0000000002 ↗
36. 10.1016/j.msea.2018.07.01510.1016/j.msea.2018.07.015 ↗
37. 10.1016/j.matlet.2016.08.13810.1016/j.matlet.2016.08.138 ↗
38. 10.1016/j.matlet.2017.10.05710.1016/j.matlet.2017.10.057 ↗
39. 10.1016/j.vacuum.2013.01.01510.1016/j.vacuum.2013.01.015 ↗
40. 10.1179/imr.1998.43.1.110.1179/imr.1998.43.1.1 ↗
41. 10.1002/adem.20170076410.1002/adem.201700764 ↗
42. 10.1155/2018/870189010.1155/2018/8701890 ↗
43. Patterson RA. Welding, brazing and soldiering. USA: ASM Handbook, ASM International; 1993;6:525.
44. Bhanumurthy K Joyson D Jawale SB . Diffusion bonding of nuclear materials. BARC Newsletter. ISSN:0976-2108 2013;19-25.
45. Murray W, , Bampton CC. Welding, brazing and soldiering. USA: ASM Handbook, ASM International; 1993;6:516.
46. 10.2355/isijinternational.30.97810.2355/isijinternational.30.978 ↗
47. 10.1016/j.jnucmat.2003.07.00410.1016/j.jnucmat.2003.07.004 ↗
48. 10.1016/S1044-5803(02)00306-610.1016/S1044-5803(02)00306-6 ↗
49. 10.1016/j.matchar.2004.12.00710.1016/j.matchar.2004.12.007 ↗
50. 10.1016/S0921-5093(03)00298-310.1016/S0921-5093(03)00298-3 ↗
51. 10.1016/j.msea.2004.08.03910.1016/j.msea.2004.08.039 ↗
52. 10.1179/mst.1986.2.4.40510.1179/mst.1986.2.4.405 ↗
53. 10.1007/BF0054001810.1007/BF00540018 ↗
54. 10.1016/j.matlet.2006.07.12310.1016/j.matlet.2006.07.123 ↗
55. 10.1016/j.matdes.2010.12.05210.1016/j.matdes.2010.12.052 ↗
56. 10.1016/S1359-6462(01)01041-710.1016/S1359-6462(01)01041-7 ↗
57. 10.1007/BF0035592510.1007/BF00355925 ↗
58. 10.1016/j.msea.2005.10.04710.1016/j.msea.2005.10.047 ↗
59. Poddar D. Solid-state diffusion bonding of commercially pure titanium and precipitation hardening stainless steel. Int J Rec Trend Eng. 2009;1:93–99.
60. 10.1179/02670830110151111210.1179/026708301101511112 ↗
61. 10.1016/j.matchar.2007.08.00310.1016/j.matchar.2007.08.003 ↗
62. 10.1016/j.matdes.2011.12.02410.1016/j.matdes.2011.12.024 ↗
63. 10.1179/174328408X31110710.1179/174328408X311107 ↗
64. 10.1007/s11661-007-9273-810.1007/s11661-007-9273-8 ↗
65. 10.1007/s11661-012-1553-210.1007/s11661-012-1553-2 ↗
66. 10.1016/j.msea.2005.07.01010.1016/j.msea.2005.07.010 ↗
67. 10.1179/026708309X1259571230587010.1179/026708309X12595712305870 ↗
68. 10.1016/j.matchar.2012.03.01610.1016/j.matchar.2012.03.016 ↗
69. 10.1016/j.matdes.2012.09.05810.1016/j.matdes.2012.09.058 ↗
70. Carl LR. Commercial data sheets for explosion bonded clad metals. Met. Prog. 1944;46:102.
71. 10.1146/annurev.ms.05.080175.00114110.1146/annurev.ms.05.080175.001141 ↗
72. 10.1016/0261-3069(85)90089-510.1016/0261-3069(85)90089-5 ↗
73. 10.1179/imr.1970.15.1.7910.1179/imr.1970.15.1.79 ↗
74. 10.1016/0025-5416(74)90195-510.1016/0025-5416(74)90195-5 ↗
75. Pocalyko A. Explosion clad plate for corrosion service. Mater Pro. 1965;6:10–15.
76. Pocalyko A. Fabrication of explosion-welded titanium-clad composites. Weld J. 1987;25:24–29.
77. 10.1016/j.actamat.2017.06.03810.1016/j.actamat.2017.06.038 ↗
78. 10.2478/amm-2014-019710.2478/amm-2014-0197 ↗
79. 10.1016/j.jmatprotec.2007.09.02810.1016/j.jmatprotec.2007.09.028 ↗
80. 10.1016/j.jmatprotec.2018.05.03110.1016/j.jmatprotec.2018.05.031 ↗
81. 10.1016/j.ijimpeng.2004.03.00310.1016/j.ijimpeng.2004.03.003 ↗
82. 10.1016/j.matdes.2015.12.12010.1016/j.matdes.2015.12.120 ↗
83. 10.1016/j.matdes.2015.08.02110.1016/j.matdes.2015.08.021 ↗
84. 10.1016/j.matdes.2007.06.01010.1016/j.matdes.2007.06.010 ↗
85. 10.1016/j.jmatprotec.2005.06.04510.1016/j.jmatprotec.2005.06.045 ↗
86. 10.1016/j.matdes.2008.06.01610.1016/j.matdes.2008.06.016 ↗
87. 10.4028/www.scientific.net/MSF.566.28510.4028/www.scientific.net/MSF.566.285 ↗
88. 10.2320/matertrans.47.204910.2320/matertrans.47.2049 ↗
89. 10.2355/isijinternational.35.21710.2355/isijinternational.35.217 ↗
90. 10.1179/1362171810Y.000000000110.1179/1362171810Y.0000000001 ↗
91. 10.1016/S1875-5372(17)30120-010.1016/S1875-5372(17)30120-0 ↗
92. 10.1179/1743284712Y.000000009910.1179/1743284712Y.0000000099 ↗
93. 10.1007/s11668-012-9601-110.1007/s11668-012-9601-1 ↗
94. 10.4028/www.scientific.net/MSF.673.12510.4028/www.scientific.net/MSF.673.125 ↗
95. 10.1007/s11661-012-1198-110.1007/s11661-012-1198-1 ↗
96. 10.1016/j.proeng.2014.11.00910.1016/j.proeng.2014.11.009 ↗
97. Banker JG Winsky JP. In Proc. Hydrometallurgical applications of titanium – clad steel. Alta Metallurgical Services ALTA; 1999. p. 99–104.
98. 10.1007/s11661-015-2768-910.1007/s11661-015-2768-9 ↗
99. 10.1016/j.msea.2008.04.03210.1016/j.msea.2008.04.032 ↗
100. 10.1007/s11669-003-0010-810.1007/s11669-003-0010-8 ↗