journal article·2024-06Open access

Effect of parameters on quality of IN718 parts using laser additive manufacturing

Aman Dwivedi, M. K. Khurana, Y. G. Bala

Materials Science and Technology· Volume 40· Issue 8

Abstract

The objective of this study is to determine the effect of process parameters such as laser power, scanning speed and layer thickness on the mechanical properties, microstructure and fracture mechanism of Inconel 718 using laser powder bed fusion additive manufacturing process. Full factorial design, regression modelling and response surface methodology are used to optimise the process parameters. The highest tensile strength occurs at 350 W laser power, 1300 mm/s scanning speed and 30 µm layer thickness. The optimal parameters for multi-objective optimisation are identical to those used for single-objective optimisation for tensile strength. The difference between the predicted and actual tensile strength is 0.33%. This work shows a successful methodology using IN718 superalloy for various applications in aerospace industry.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, Uttar Pradesh, India

References (35)

Show source-provided references
1. 10.1016/j.matdes.2021.10964710.1016/j.matdes.2021.109647 ↗
2. 10.1007/s00170-017-0839-310.1007/s00170-017-0839-3 ↗
3. 10.1007/s11665-014-0958-z10.1007/s11665-014-0958-z ↗
4. 10.1016/j.pmatsci.2019.10057810.1016/j.pmatsci.2019.100578 ↗
5. 10.1063/1.499016610.1063/1.4990166 ↗
6. 10.1016/j.actamat.2017.02.02510.1016/j.actamat.2017.02.025 ↗
7. 10.1016/J.ENG.2017.05.01710.1016/J.ENG.2017.05.017 ↗
8. 10.1016/j.promfg.2020.05.11710.1016/j.promfg.2020.05.117 ↗
9. 10.1016/j.matpr.2020.04.69810.1016/j.matpr.2020.04.698 ↗
10. 10.1016/j.matpr.2020.01.57110.1016/j.matpr.2020.01.571 ↗
11. 10.1016/j.msea.2019.03.00710.1016/j.msea.2019.03.007 ↗
12. 10.1016/j.msea.2020.13994110.1016/j.msea.2020.139941 ↗
13. 10.3390/met1111168210.3390/met11111682 ↗
14. 10.3390/cryst1209124310.3390/cryst12091243 ↗
15. 10.1016/j.actamat.2011.12.03210.1016/j.actamat.2011.12.032 ↗
16. 10.1007/s40964-016-0013-810.1007/s40964-016-0013-8 ↗
17. 10.1016/j.msea.2017.02.06210.1016/j.msea.2017.02.062 ↗
18. 10.1016/j.msea.2016.07.06110.1016/j.msea.2016.07.061 ↗
19. 10.1016/j.msea.2015.05.03510.1016/j.msea.2015.05.035 ↗
20. 10.1016/j.jallcom.2008.06.07910.1016/j.jallcom.2008.06.079 ↗
21. 10.1016/j.ijfatigue.2018.12.02110.1016/j.ijfatigue.2018.12.021 ↗
22. 10.1016/j.mtla.2020.10097610.1016/j.mtla.2020.100976 ↗
23. 10.1016/j.ijfatigue.2020.10563710.1016/j.ijfatigue.2020.105637 ↗
24. Montgomery DC. Design and analysis of experiments. 8th ed. New York: John Wiley & Sons, 2012.
25. 10.1016/S0007-8506(07)63153-910.1016/S0007-8506(07)63153-9 ↗
26. 10.1016/j.jmatprotec.2014.07.01710.1016/j.jmatprotec.2014.07.017 ↗
27. Gu H, Gong H, Pal D, et al. Influences of energy density on porosity and microstructure of selective laser melted 17-4PH stainless steel. In: Proceedings of the 24th International SFF Symposium – An Additive Manufacturing Conference, Austin, TX, USA, 12–14 August 2013, pp. 474–489. doi:https://doi.org/10.26153/tsw/15572
28. Demey RJ · 2012
29. 10.1016/j.powtec.2017.01.03010.1016/j.powtec.2017.01.030 ↗
30. 10.1016/j.addma.2020.10143710.1016/j.addma.2020.101437 ↗
31. 10.1016/j.jallcom.2018.06.11210.1016/j.jallcom.2018.06.112 ↗
32. 10.1016/j.msea.2017.06.09810.1016/j.msea.2017.06.098 ↗
33. 10.3390/met1209149410.3390/met12091494 ↗
34. 10.1080/02670836.2021.189345710.1080/02670836.2021.1893457 ↗
35. 10.1016/j.msea.2007.05.07910.1016/j.msea.2007.05.079 ↗