journal article·2018-09

Interface sheet-constrained groove pressing as a modified severe plastic deformation process

A. Shahmirzaloo, G. Faraji, M. Safari, S. Mohammadinejad

Materials Science and Technology· Volume 34· Issue 14
Publisher page

Abstract

In this paper, a new severe plastic deformation (SPD) process entitled interface sheet-constrained groove pressing (ISCGP) as a new variant of conventional CGP has been developed for producing ultrafine-grained metallic materials. In this process, repetitive shear deformation is imposed into the sheet material by utilising symmetrically grooved die along with two interface sheet on both sides. To study the applicability, mild steel sheets were processed by both ISCGP and CGP processes, and mechanical and microstructural properties of the processed samples were investigated. The results show a considerable improvement in mechanical properties including hardness, yield strength, and ultimate tensile strength, though the ductility sacrifice was reduced. Comparing ISCGP and conventional CGP revealed interesting results, which are shown that ISCGP can result in better surface quality and ductility.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran

School of Mechanical Engineering, College of Engineering, Arak University of Technology, Arak, Iran

References (47)

Show source-provided references
1. 10.1016/S0965-9773(98)00026-910.1016/S0965-9773(98)00026-9 ↗
2. 10.1016/j.jmatprotec.2007.04.07610.1016/j.jmatprotec.2007.04.076 ↗
3. 10.1016/0921-5093(95)09705-810.1016/0921-5093(95)09705-8 ↗
4. 10.1016/S0921-5093(99)00800-X10.1016/S0921-5093(99)00800-X ↗
5. 10.1016/j.msea.2010.10.01810.1016/j.msea.2010.10.018 ↗
6. 10.1016/j.msea.2007.12.05510.1016/j.msea.2007.12.055 ↗
7. 10.1016/j.msea.2009.06.00510.1016/j.msea.2009.06.005 ↗
8. 10.2320/matertrans.45.333810.2320/matertrans.45.3338 ↗
9. Kawasaki Y, Neishi K, Miyahara Y, Application of severe torsion straining process for grain refinement of steel. Materials Science Forum: Trans Tech Publ; 2006. p. 943–948.10.4028/0-87849-985-7.943 ↗
10. Miyahara Y, Emi N, Neishi K, Microstructures and mechanical properties of Mg alloy after severe torsion straining process. Materials Science Forum: Trans Tech Publ; 2006. p. 949–954.10.4028/0-87849-985-7.949 ↗
11. Neishi K, Higashino A, Miyahara Y, Grain refinement of commercial Al-Mg alloy using severe torsion straining process. Materials Science Forum: Trans Tech Publ; 2006. p. 955–960.10.4028/0-87849-985-7.955 ↗
12. 10.1016/j.matlet.2017.03.14210.1016/j.matlet.2017.03.142 ↗
13. 10.2320/matertrans.MD20110710.2320/matertrans.MD201107 ↗
14. 10.1016/j.msea.2013.10.03610.1016/j.msea.2013.10.036 ↗
15. 10.1016/S1359-6454(98)00365-610.1016/S1359-6454(98)00365-6 ↗
16. 10.1016/S0921-5093(01)01665-310.1016/S0921-5093(01)01665-3 ↗
17. 10.1016/j.pmatsci.2008.03.00210.1016/j.pmatsci.2008.03.002 ↗
18. 10.1016/j.pmatsci.2006.02.00310.1016/j.pmatsci.2006.02.003 ↗
19. 10.1002/adem.20160087310.1002/adem.201600873 ↗
20. 10.1002/adem.20150008310.1002/adem.201500083 ↗
21. 10.1016/j.scriptamat.2012.08.00810.1016/j.scriptamat.2012.08.008 ↗
22. 10.1016/j.msea.2005.08.10110.1016/j.msea.2005.08.101 ↗
23. 10.1016/j.msea.2008.03.05010.1016/j.msea.2008.03.050 ↗
24. 10.1016/j.matdes.2009.07.03510.1016/j.matdes.2009.07.035 ↗
25. 10.1016/j.msea.2009.03.08110.1016/j.msea.2009.03.081 ↗
26. 10.1016/j.scriptamat.2007.01.04310.1016/j.scriptamat.2007.01.043 ↗
27. 10.1016/j.actamat.2009.07.04910.1016/j.actamat.2009.07.049 ↗
28. 10.1016/j.commatsci.2010.12.01010.1016/j.commatsci.2010.12.010 ↗
29. 10.1016/j.jmatprotec.2010.11.01310.1016/j.jmatprotec.2010.11.013 ↗
30. 10.1016/j.matdes.2011.03.08110.1016/j.matdes.2011.03.081 ↗
31. 10.1016/j.jmatprotec.2012.09.01210.1016/j.jmatprotec.2012.09.012 ↗
32. 10.1016/j.msec.2009.10.00210.1016/j.msec.2009.10.002 ↗
33. 10.1016/j.msea.2010.03.00510.1016/j.msea.2010.03.005 ↗
34. 10.1016/j.matdes.2011.02.03210.1016/j.matdes.2011.02.032 ↗
35. 10.1016/j.msea.2011.03.02410.1016/j.msea.2011.03.024 ↗
36. 10.1016/j.msea.2016.01.00510.1016/j.msea.2016.01.005 ↗
37. 10.1080/02670836.2016.121506410.1080/02670836.2016.1215064 ↗
38. 10.1016/j.matdes.2008.09.03910.1016/j.matdes.2008.09.039 ↗
39. 10.1016/j.msea.2012.11.06510.1016/j.msea.2012.11.065 ↗
40. 10.1016/j.msea.2017.07.08810.1016/j.msea.2017.07.088 ↗
41. 10.1016/j.msea.2007.01.06210.1016/j.msea.2007.01.062 ↗
42. 10.1016/j.ijplas.2016.10.00310.1016/j.ijplas.2016.10.003 ↗
43. 10.1016/S1003-6326(08)60267-810.1016/S1003-6326(08)60267-8 ↗
44. 10.1016/j.msea.2007.01.10510.1016/j.msea.2007.01.105 ↗
45. 10.1016/j.scriptamat.2005.03.00110.1016/j.scriptamat.2005.03.001 ↗
46. 10.1016/j.msea.2011.10.00710.1016/j.msea.2011.10.007 ↗
47. 10.1016/j.msea.2011.05.01410.1016/j.msea.2011.05.014 ↗