journal article·2023-07

Aging temperature effects on microstructure and mechanical properties for additively manufactured AlSi10Mg

Liang Yaru, Ma Tiejun, Jin Tounan, Zhang Bo, Yang Le, Yin Wenhang, Fu Hanguang

Materials Science and Technology· Volume 39· Issue 10
Publisher page

Abstract

AlSi10Mg alloy was prepared by laser powder bed fusion (LPBF). The evolution of microstructure and mechanical properties after diverse aging temperatures were systematically studied. The metastable ultra-fine cellular structure was obtained for as-built specimens. Aging at lower temperatures (100–225°C) promotes the formation of a large number of Si-rich precipitates, and the original Si networks can be retained. With the increase in aging temperature, Si network gradually broke apart, and Si-rich particles grew and spheroidised. The hardness increases with temperatures up to 175°C, and decreases thereafter, while the opposite trend was observed for elongation. Excellent comprehensive mechanical properties with a tensile strength of 381 MPa and elongation of 5.2% can be obtained at 225°C for 2 h. Highlights The effect of aging temperatures on microstructure stability and mechanical properties of additive manufacturing AlSi10Mg alloy has been revealed systematically. The Si-rich precipitates and eutectic Si network were responsible for the observed mechanical properties changes. A good combination of strength and ductility is obtained at 225°C for 2 h aging heat treatment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Advanced Functional Materials, Ministry of Education, School of Materials Science and Engineering, Beijing University of Technology, Beijing, People's Republic of China

Gangnuo New Materials Co., Ltd., Handan, People's Republic of China

Funding

Hebei Science and Technology Major Project · R&D Program of Beijing Municipal Education Commission

References (44)

Show source-provided references
1. 10.1016/j.addma.2021.10215510.1016/j.addma.2021.102155 ↗
2. 10.1038/s41598-021-85047-210.1038/s41598-021-85047-2 ↗
3. 10.1080/02670836.2017.139851310.1080/02670836.2017.1398513 ↗
4. 10.1016/j.matdes.2018.05.02610.1016/j.matdes.2018.05.026 ↗
5. Gu D · Science · 2021 · 372
6. 10.1016/j.pmatsci.2019.10057810.1016/j.pmatsci.2019.100578 ↗
7. 10.1080/02670836.2019.158974010.1080/02670836.2019.1589740 ↗
8. 10.1016/j.matchar.2021.11111310.1016/j.matchar.2021.111113 ↗
9. 10.1016/j.jallcom.2019.06.27410.1016/j.jallcom.2019.06.274 ↗
10. 10.1007/s40194-018-0592-810.1007/s40194-018-0592-8 ↗
11. 10.1007/s40195-019-00903-510.1007/s40195-019-00903-5 ↗
12. 10.1016/j.msea.2020.13929610.1016/j.msea.2020.139296 ↗
13. 10.1016/j.jallcom.2018.04.29810.1016/j.jallcom.2018.04.298 ↗
14. 10.1007/s40516-019-00099-710.1007/s40516-019-00099-7 ↗
15. 10.1016/j.msea.2018.05.07410.1016/j.msea.2018.05.074 ↗
16. 10.1557/jmr.2018.8210.1557/jmr.2018.82 ↗
17. 10.1016/j.jallcom.2021.16266510.1016/j.jallcom.2021.162665 ↗
18. 10.1016/j.corsci.2018.11.03810.1016/j.corsci.2018.11.038 ↗
19. 10.1016/j.msea.2017.08.02910.1016/j.msea.2017.08.029 ↗
20. 10.1016/j.matlet.2018.09.10910.1016/j.matlet.2018.09.109 ↗
21. 10.1016/j.addma.2020.10142910.1016/j.addma.2020.101429 ↗
22. 10.1016/j.msea.2021.14161210.1016/j.msea.2021.141612 ↗
23. Rafieazad M · Addit Manuf · 2019 · 28 · 107
24. 10.1016/j.msea.2016.03.08810.1016/j.msea.2016.03.088 ↗
25. 10.1016/j.msea.2016.04.09210.1016/j.msea.2016.04.092 ↗
26. 10.1016/j.msea.2018.10.04710.1016/j.msea.2018.10.047 ↗
27. 10.1016/j.matchar.2017.11.05210.1016/j.matchar.2017.11.052 ↗
28. 10.1016/j.jmst.2021.07.05910.1016/j.jmst.2021.07.059 ↗
29. 10.1016/j.jmrt.2022.04.02310.1016/j.jmrt.2022.04.023 ↗
30. 10.1016/j.addma.2018.07.01410.1016/j.addma.2018.07.014 ↗
31. 10.1016/j.matdes.2017.02.08210.1016/j.matdes.2017.02.082 ↗
32. 10.1007/BF0055054910.1007/BF00550549 ↗
33. 10.1016/j.actamat.2011.03.06210.1016/j.actamat.2011.03.062 ↗
34. 10.1016/j.msea.2018.10.08310.1016/j.msea.2018.10.083 ↗
35. 10.1007/s11661-019-05505-510.1007/s11661-019-05505-5 ↗
36. 10.1007/s11837-014-0968-110.1007/s11837-014-0968-1 ↗
37. 10.1016/j.msea.2018.10.05510.1016/j.msea.2018.10.055 ↗
38. 10.1016/j.jmst.2020.06.05310.1016/j.jmst.2020.06.053 ↗
39. 10.1016/j.scriptamat.2017.07.02510.1016/j.scriptamat.2017.07.025 ↗
40. 10.1016/j.msea.2020.13897610.1016/j.msea.2020.138976 ↗
41. 10.1016/j.matchar.2018.04.02210.1016/j.matchar.2018.04.022 ↗
42. 10.1016/j.msea.2018.07.04810.1016/j.msea.2018.07.048 ↗
43. 10.1016/j.msec.2020.11072810.1016/j.msec.2020.110728 ↗
44. 10.1016/j.msea.2020.14010910.1016/j.msea.2020.140109 ↗