Relative effect of C and Mn on strength-toughness of medium Mn steels
Source abstract
Abstract
In order to find an alternative choice for structural load-bearing components, an effort was made to improve the impact toughness of medium Mn steel through inter-critical annealing treatment without significant reduction in strength. Besides, the relative effect of C and Mn contents on microstructure and mechanical properties of medium Mn steels was also studied. Fibrous microstructures with fine, alternate films of ferrite and martensite with retained austenite were obtained. The low-C, high-Mn steel showed a superior combination of yield strength, ductility and impact toughness due to finer microstructure and higher retained austenite fraction, as compared to high-C, low-Mn steel. Thus, the beneficial effect of Mn enrichment in stabilising retained austenite and improving mechanical properties by transformation induced plasticity effect becomes evident.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metallurgical and Materials Engineering, Indian Institute of Technology (I.I.T.), Kharagpur, West Bengal, India
References (39)
Show source-provided references
1. 10.1007/s12540-009-0909-710.1007/s12540-009-0909-7 ↗
2. 10.1016/j.scriptamat.2010.09.04010.1016/j.scriptamat.2010.09.040 ↗
3. 10.1016/j.actamat.2014.10.05210.1016/j.actamat.2014.10.052 ↗
4. 10.1016/S1359-6454(00)00215-910.1016/S1359-6454(00)00215-9 ↗
5. 10.1016/j.scriptamat.2012.11.00310.1016/j.scriptamat.2012.11.003 ↗
6. 10.1007/BF0264766510.1007/BF02647665 ↗
7. 10.1007/s11661-011-0687-y10.1007/s11661-011-0687-y ↗
8. 10.1016/j.msea.2011.05.03910.1016/j.msea.2011.05.039 ↗
9. 10.1016/j.scriptamat.2010.06.02310.1016/j.scriptamat.2010.06.023 ↗
10. 10.1016/j.msea.2016.07.10410.1016/j.msea.2016.07.104 ↗
11. 10.1016/j.actamat.2013.12.03810.1016/j.actamat.2013.12.038 ↗
12. 10.1016/j.scriptamat.2010.12.03710.1016/j.scriptamat.2010.12.037 ↗
13. 10.1016/j.msea.2008.09.02610.1016/j.msea.2008.09.026 ↗
14. 10.1016/j.actamat.2011.08.03010.1016/j.actamat.2011.08.030 ↗
15. 10.1007/s11661-011-0869-710.1007/s11661-011-0869-7 ↗
16. 10.1007/s11661-013-1860-210.1007/s11661-013-1860-2 ↗
17. 10.1016/j.msea.2016.11.04810.1016/j.msea.2016.11.048 ↗
18. Anderson TL. · 1995
19. 10.1016/0001-6160(81)90020-110.1016/0001-6160(81)90020-1 ↗
20. 10.1007/BF0264380910.1007/BF02643809 ↗
21. 10.1179/mst.1994.10.11.96410.1179/mst.1994.10.11.964 ↗
22. 10.1016/j.msea.2010.11.05410.1016/j.msea.2010.11.054 ↗
23. 10.1007/978-94-010-9506-810.1007/978-94-010-9506-8 ↗
24. 10.1007/s11661-017-4099-510.1007/s11661-017-4099-5 ↗
25. 10.2355/isijinternational.45.119410.2355/isijinternational.45.1194 ↗
26. American Society for Testing and Materials (ASTM). Standard test methods for tension testing of metallic materials-vol03.01. Pennsylvania: ASTM; 2005. Standard No.ASTME8/E8M-09.
27. American Society for Testing and Materials (ASTM). Standard test methods for notched bar impact testing of metallic materials-vol 03.01. Pennsylvania: ASTM; 2005. Standard No.ASTME23-05.
28. 10.2355/isijinternational.43.204610.2355/isijinternational.43.2046 ↗
29. European structural steel standard. Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition. UK; 2004. Standard No. EN 10025:2004.
30. 10.1007/s11661-016-3507-610.1007/s11661-016-3507-6 ↗
31. 10.1007/BF0264368610.1007/BF02643686 ↗
32. Monteiro SN, Reed-Hill RE. On the Double-n Behavior of Iron. 1971;2:0–1.10.1007/BF02813280 ↗
33. 10.1007/BF0281422810.1007/BF02814228 ↗
34. 10.1016/j.actamat.2011.03.02510.1016/j.actamat.2011.03.025 ↗
35. 10.1007/BF0264612710.1007/BF02646127 ↗
36. 10.1007/s11661-014-2228-y10.1007/s11661-014-2228-y ↗
37. 10.1007/s10853-009-3392-010.1007/s10853-009-3392-0 ↗
38. 10.1016/0921-5093(94)09594-M10.1016/0921-5093(94)09594-M ↗
39. 10.1007/BF0172986010.1007/BF01729860 ↗