High temperature oxidation and corrosion of gas turbine materials in burner rig exposures
Source abstract
Abstract
With the introduction of novel fuels, which may contain high levels of trace impurities including sulphur and alkali metals, industrial gas turbines are operating with increasingly corrosive combustion environments. To investigate the effect that this, coupled with the higher combustion gas temperatures needed to increase power plant efficiency, has on current state-of-the-art gas turbine component materials, three burner rig exposure tests have been run. The tests evaluated the effects of fly ash, gas moisture and gas temperatures on the alkali sulphate induced hot corrosion of CM247LC, Haynes 230, IN939 and IN728LC. Type I (sulphidation and internal damage), type II (pitting) and mixed mode hot corrosion were observed under different test conditions; however, the presence of fly ash appeared to reduce the levels of hot corrosion. CM247LC, with its high Al content improving oxidation resistance, showed less resistance to hot corrosion than the other, higher Cr content, alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Combustion and Detonation Processes · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centre for Energy and Resource Technology, Building 40, School of Applied Sciences, Cranfield University, Cranfield, Bedfordshire MK43 0AL, UK
References (20)
Show source-provided references
1. Grubb M, Vrolijk C, Brack D: ‘The Kyoto Protocol, a guide and assessment’; 1999, London, Royal Institute of International Affairs.
2. 10.1016/j.pecs.2006.08.00210.1016/j.pecs.2006.08.002 ↗
3. 10.1179/174892408X37350910.1179/174892408X373509 ↗
4. 10.1016/j.energy.2008.08.00110.1016/j.energy.2008.08.001 ↗
5. 10.1016/S0960-8524(98)00007-810.1016/S0960-8524(98)00007-8 ↗
6. 10.3184/096034007X28164010.3184/096034007X281640 ↗
7. 10.1016/S0961-9534(97)00010-X10.1016/S0961-9534(97)00010-X ↗
8. Maurstad O: ‘An overview of coal based integrated gasification combined cycle (IGCC) technology’, Technical publication LFEE 2005-002 WP, September 2005.
9. 10.4028/www.scientific.net/MSF.369-372.83310.4028/www.scientific.net/MSF.369-372.833 ↗
10. H2-IGCC official website: http://www.h2-igcc.eu/default.aspx (accessed 30 June 2011).
11. United States–United Kingdom Collaboration on Fossil Energy R&D official website: http://fossil.energy.gov/international/International_Partners/us-uk_collaboration.html (accessed 30 June 2011).
12. Kulkarni A: ‘Gas turbines fired on syngas and other fuel gases’, Proc.23rd Ann. Conf. on ‘Fossil energy materials’, Pittsburgh, PA, USA, May 2009, US Department of Energy.
13. 10.1016/S0364-5916(02)00036-610.1016/S0364-5916(02)00036-6 ↗
14. Duret-Thual C, Morbioli R, Steinmetz P: ‘A guide to the control of high temperature corrosion and protection of gas turbine materials’, (ed. , Morocutti O, ed); 1986, Belgium, Commission of the European Communities.
15. 10.1016/j.fuel.2009.02.02310.1016/j.fuel.2009.02.023 ↗
16. 10.3184/096034007X26358710.3184/096034007X263587 ↗
17. 10.1016/0010-938X(92)90002-K10.1016/0010-938X(92)90002-K ↗
18. 10.1016/0010-938X(93)90341-D10.1016/0010-938X(93)90341-D ↗
19. 10.1016/0025-5416(87)90395-810.1016/0025-5416(87)90395-8 ↗
20. Dennis RA: ‘FE research direction – thermal barrier coatings and health monitoring techniques’, Proc. Workshop on ‘Advanced coating materials and technology for extreme environments’, State College, PA, USA, September 2006, Pennsylvania State University.