journal article·2008-01

Improvement of grain structure and mechanical properties of a land based gas turbine blade directionally solidified with liquid metal cooling process

A. Kermanpur, M. Mehrara, N. Varahram, P. Davami

Materials Science and Technology· Volume 24· Issue 1
Publisher page

Abstract

The manufacturing process of a directionally solidified (DS) IN738LC turbine blade, produced with the liquid metal cooling (LMC) process was improved based on process modelling. The improvement involved varying the system dimensions in the baffle area and optimising the mould thickness, design and the withdrawal parameters. The grain structure of the DS blades produced exhibits a well defined <001>. texture with a few stray grains near the blade top compared to the previous design. Some blades were given to a two stage heat treatment followed by tension tests at 25 and 650°C as well as creep tests at 152 MPa/982°C and 340 MPa/850°C. The yield and tensile strength of improved DS blades were comparable to conventionally cast (CC) IN738LC blades, while the creep properties and the tensile elongation of the DS blades were significantly improved using the optimised LMC process. The LMC system is under more modifications to produce defect free single crystal turbine blades.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. 10.1179/02670830010150811710.1179/026708300101508117 ↗
2. Cockcroft S. L., Rappaz M., Mitchell A., Fernihough J., and Schmalz A. J.: Proc. Conf. on ‘Materials for advanced power engineer-ing’, (ed.Coutsouradis D. et al), 1145; 1994, Brentford, Middx, Kluwer Academic.
3. Seth B. B.: Proc. Conf. on ‘Superalloy 2000’, (ed.Pollock T. M. et al), 3; 2000, Warrendale, PA, TMS.
4. Lohmueller L., Esser W., Grossmann J., Hoerdler M., Preuhs J., and Singer R. F.: Proc. Conf. on ‘Superalloy 2000’, (ed.Pollock T. M. et al), 181; 2000, Warrendale, PA, TMS.10.7449/2000/Superalloys_2000_181_188 ↗
5. 10.1007/s11661-004-0066-z10.1007/s11661-004-0066-z ↗
6. Konter M., Kats E., and Hofmann N.: Proc. Conf. on ‘Superalloy 2000’, 189; (ed.Pollock T. M. et al), 2000, Warrendale, PA, TMS.10.7449/2000/Superalloys_2000_189_200 ↗
7. 10.1007/BF0265882910.1007/BF02658829 ↗
8. Singer R. F.: Proc. Conf. on ‘Materials for advanced power engineering’, (ed.Coutsouradis D. et al.), 1707; 1994, Brentford, Middx, Kluwer Academic.
9. Shalin R. E. · Metall. Sci Technot · 1992 · 10 · 3
10. Hugo F., Betz U., Ren J., Huang S. C., Bondarenko J. A., and Gerasimov V.: Proc. Int. Symp. on ‘Liquid metal processing and castings’, (ed.Mitchell A.), 16; 1999, Santa Fe, NM, ASM International.
11. 10.1007/s11661-997-0274-410.1007/s11661-997-0274-4 ↗
12. 10.1007/s11663-000-0017-z10.1007/s11663-000-0017-z ↗
13. 10.1007/BF0264449310.1007/BF02644493 ↗
14. Peterson L. G. ‘Directional solidification of land-based gas turbine buckets’, ASME Paper No. 89-GT-332, New York, 1989.10.1115/89-GT-332 ↗
15. Quested P. N., and McLean M.: Proc. COST501 Conf. on ‘High temperature alloys for gas turbines and other applications’, (ed.Betz W.), 697; 1986, Liege, D. Reidel.
16. McLean M., and Schubert F.: Proc. Conf. on ‘High temperature alloys for gas turbines’, (ed.Coutsouradis D.), 423; 1978, London, Applied Science Publishers.