Si 3 N 4 –TiN conductive ceramic composites: topography on EDMed surfaces and precise drilled holes
Source abstract
Abstract
In this study, it is challenging to drill a 5 mm hole in a Si 3 N 4 –TiN conductive ceramic composite, specifically when attempting to identify an association between EDM machining inputs such as current, pulse on-time, pulse off-time, dielectric pressure and spark gap and performance parameters like as Material Removal Rate, Electrode Wear Rate, Average Surface Roughness, and geometrical tolerances such as Cylindricity, Circularity and perpendicularity. The study examines the surface deformations of a composite comprising EDAX report, machined electrode and molybdenum wire following WEDM machining. Current of 5A, Pulse on-time of 9µs, Pulse off-time of 7µs, spark gap of 0.15 mm, dielectric pressure of 21.0 kg/cm 2 , material removal rate of 0.004214 g/min, electrode wear rate of 0.000245 g/min and surface roughness of 0.349 µm were found to be optimal. The experimental findings show that good surface finish may be attained on a copper electrode-machined surface, along with improved machining accuracy, closer geometrical tolerances and lesser anomalies.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Mahendra Institute of Technology (Autonomous), Namakkal District, India
Department of Mechanical Engineering, Mahendra Polytechnic College, Namakkal District, India
References (36)
Show source-provided references
1. 10.1080/2374068X.2021.194530910.1080/2374068X.2021.1945309 ↗
2. 10.1080/10426914.2015.105894710.1080/10426914.2015.1058947 ↗
3. 10.1007/s12633-020-00848-w10.1007/s12633-020-00848-w ↗
4. 10.1080/2374068X.2022.203645010.1080/2374068X.2022.2036450 ↗
5. 10.1016/j.matpr.2019.09.09010.1016/j.matpr.2019.09.090 ↗
6. 10.1080/14484846.2022.203008910.1080/14484846.2022.2030089 ↗
7. 10.1080/2374068X.2020.185539810.1080/2374068X.2020.1855398 ↗
8. 10.1007/s12206-016-1009-510.1007/s12206-016-1009-5 ↗
9. 10.1142/S021968671550017110.1142/S0219686715500171 ↗
10. 10.1007/s11665-021-05677-510.1007/s11665-021-05677-5 ↗
11. 10.1080/10910344.2022.204485510.1080/10910344.2022.2044855 ↗
12. Xu YS, Jin CP, Li P Microstructure and properties of the dispersion-strengthened Cu-ZrO2 composite for application of spot-welding electrode. Adv Mater Res. 2014;887:32–38. Trans Tech Publications Ltd.
13. 10.1016/j.ceramint.2022.11.01110.1016/j.ceramint.2022.11.011 ↗
14. 10.1016/j.jmapro.2021.12.03810.1016/j.jmapro.2021.12.038 ↗
15. 10.1016/j.jmapro.2020.03.01510.1016/j.jmapro.2020.03.015 ↗
16. 10.1016/j.jmatprotec.2006.09.03410.1016/j.jmatprotec.2006.09.034 ↗
17. 10.1007/s00170-021-08040-z10.1007/s00170-021-08040-z ↗
18. 10.1016/j.surfcoat.2018.05.03810.1016/j.surfcoat.2018.05.038 ↗
19. 10.1007/s12666-021-02494-110.1007/s12666-021-02494-1 ↗
20. 10.1016/j.precisioneng.2020.06.00210.1016/j.precisioneng.2020.06.002 ↗
21. 10.1016/j.ceramint.2021.03.30910.1016/j.ceramint.2021.03.309 ↗
22. 10.1016/j.ceramint.2020.01.08210.1016/j.ceramint.2020.01.082 ↗
23. 10.1080/10426914.2020.181389410.1080/10426914.2020.1813894 ↗
24. 10.1007/s40430-021-03243-710.1007/s40430-021-03243-7 ↗
25. 10.1007/s11665-021-06116-110.1007/s11665-021-06116-1 ↗
26. 10.1016/j.matpr.2017.02.21010.1016/j.matpr.2017.02.210 ↗
27. 10.1007/s12633-020-00740-710.1007/s12633-020-00740-7 ↗
28. 10.1080/10910344.2021.197171410.1080/10910344.2021.1971714 ↗
29. 10.1007/s12633-022-02093-910.1007/s12633-022-02093-9 ↗
30. 10.1080/10426914.2021.188571010.1080/10426914.2021.1885710 ↗
31. 10.1007/s00170-021-07313-x10.1007/s00170-021-07313-x ↗
32. 10.1016/j.procir.2018.05.03110.1016/j.procir.2018.05.031 ↗
33. 10.1080/10426914.2014.96204110.1080/10426914.2014.962041 ↗
34. 10.1504/IJCMSSE.2018.09254110.1504/IJCMSSE.2018.092541 ↗
35. 10.1007/978-981-19-7150-1_1610.1007/978-981-19-7150-1_16 ↗
36. 10.1088/1757-899X/525/1/01208310.1088/1757-899X/525/1/012083 ↗