journal article·2018-11

Production of tailor-welded blanks by vertical compensation friction stir welding technique

Mohamed Abu–Okail, Moataz H. Ata, Ahmed Abu-oqail, Ghada M. F. Essa, T. S. Mahmoud, Ibrahim Hassab–Allah

Materials Science and Technology· Volume 34· Issue 16
Publisher page

Abstract

An attempt was made for the first time to fabricate tailor-welded blanks (TWBs) through the feasibility of selective alloying in the solid state of vertical compensation friction stir welding (VCFSW) technique. The results revealed that the production of TWBs by VCFSW technique had higher homogeneity without any defects when compared to the production of TWBs by conventional FSW process at constant tool rotational speed 2000 rpm, traverse speed 20 mm min −1 and an inclination angle 2.5°. The maximum mechanical properties of the fabricated TWBs were obtained when the width of compensation strip 1.5 mm was used. The fracture surface of TWB at the width of compensation strip 1.5 mm showed ductile fracture mode.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Department, Faculty of Industrial Education, Sohag University, Sohag, Egypt

Mechanical Department, Faculty of Industrial Education, Beni-Seuf University, Beni-Seuf, Egypt

Housing and Building National Research Center, Cairo, Egypt

Mechanical Engineering Department, Faculty of Engineering at Shoubra, Benha University, Benha, Egypt

Mechanical Engineering Department, Faculty of Engineering, Assiut University, Assiut, Egypt

Funding

Sohag University

References (24)

Show source-provided references
1. 10.1016/j.jmatprotec.2013.08.01510.1016/j.jmatprotec.2013.08.015 ↗
2. Leonard A, Lockyer S. Flaws in friction stir welding. International symposium on friction stir welding. 2003; Published on CD.
3. 10.1016/j.jmatprotec.2012.10.01010.1016/j.jmatprotec.2012.10.010 ↗
4. 10.1016/j.ijmachtools.2008.01.00710.1016/j.ijmachtools.2008.01.007 ↗
5. 10.1115/1.400158110.1115/1.4001581 ↗
6. 10.2514/6.2006-224410.2514/6.2006-2244 ↗
7. 10.1179/174328009X41113610.1179/174328009X411136 ↗
8. 10.1007/s11661-001-1038-110.1007/s11661-001-1038-1 ↗
9. 10.1016/j.engfracmech.2007.01.02610.1016/j.engfracmech.2007.01.026 ↗
10. 10.1016/S1003-6326(08)60313-110.1016/S1003-6326(08)60313-1 ↗
11. Yao J · J Aerosp Mater Technol · 2012 · 1 · 73
12. 10.1016/j.matdes.2014.05.01610.1016/j.matdes.2014.05.016 ↗
13. 10.1016/S0007-8506(07)60416-810.1016/S0007-8506(07)60416-8 ↗
14. 10.1016/j.ijplas.2008.08.00510.1016/j.ijplas.2008.08.005 ↗
15. 10.1016/j.matdes.2008.08.01810.1016/j.matdes.2008.08.018 ↗
16. 10.1016/j.ijsolstr.2009.12.02210.1016/j.ijsolstr.2009.12.022 ↗
17. 10.1007/s11665-009-9589-110.1007/s11665-009-9589-1 ↗
18. 10.1007/s00170-016-9147-610.1007/s00170-016-9147-6 ↗
19. 10.1007/s00170-015-7904-610.1007/s00170-015-7904-6 ↗
20. 10.1016/j.matdes.2014.12.00910.1016/j.matdes.2014.12.009 ↗
21. 10.1016/j.jmatprotec.2015.03.03610.1016/j.jmatprotec.2015.03.036 ↗
22. 10.1016/j.matdes.2007.01.03010.1016/j.matdes.2007.01.030 ↗
23. 10.1016/j.msea.2005.09.07210.1016/j.msea.2005.09.072 ↗
24. 10.1016/S1005-0302(10)60118-110.1016/S1005-0302(10)60118-1 ↗