journal article·2017-04

Low-cyclic fatigue behaviour of an Al–Cu–Mg–Ag alloy under T6 and T840 conditions

M. Gazizov, R. Kaibyshev

Materials Science and Technology· Volume 33· Issue 6
Publisher page

Abstract

The low-cyclic fatigue (LCF) behaviour of an AA2139 alloy belonging to the Al–Cu–Mg–Ag system was investigated under T6 and T840 conditions. The T840 treatment involves cold rolling with a 40% reduction prior to ageing, and this was effective in increasing the tensile strength of the alloy. Under cyclic loading at total strain amplitudes ( ε ac ) of ±0.4 to ±1.0%, the mechanical behaviour is defined as the prevalence of elastic over plastic deformation processes under both the T6/T840 conditions. The initial weak hardening during one to two cycles of loading at ε ac > 0.55% and an insignificant softening upon following the cyclic loading to fracture was observed for the T6/T840 conditions. The LCF behaviour of the alloy under the T6/T840 conditions is described by the Basquin–Manson–Coffin relationship. This paper is part of a Themed Issue on Aluminium-based materials: processing, microstructure, properties, and recycling.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory of Mechanical Properties of Nanoscale Materials and Superalloys, Belgorod State University, Pobeda 85, Belgorod 308015, Russia

Funding

Ministry of Education and Science of the Russian Federation

References (32)

Show source-provided references
1. 10.1179/02670839910150659910.1179/026708399101506599 ↗
2. 10.1016/S1359-6454(01)00155-010.1016/S1359-6454(01)00155-0 ↗
3. 10.1016/j.msea.2008.03.01410.1016/j.msea.2008.03.014 ↗
4. 10.1016/S1359-6454(98)00280-810.1016/S1359-6454(98)00280-8 ↗
5. 10.1016/j.msea.2014.11.09410.1016/j.msea.2014.11.094 ↗
6. 10.1007/s11041-008-9055-y10.1007/s11041-008-9055-y ↗
7. 10.1007/BF0267075310.1007/BF02670753 ↗
8. Polmear I. J. ‘Light alloys: from traditional alloys to nanocrystals’, 4nd edn, 1–204; 2006, Oxford, Butterworth-Heinemann (Elsevier).
9. 10.4028/www.scientific.net/MSF.794-796.27810.4028/www.scientific.net/MSF.794-796.278 ↗
10. 10.1017/CBO978051180657510.1017/CBO9780511806575 ↗
11. 10.1016/j.actamat.2013.03.01510.1016/j.actamat.2013.03.015 ↗
12. 10.1016/S1359-6454(98)00188-810.1016/S1359-6454(98)00188-8 ↗
13. 10.1016/j.msea.2013.09.02110.1016/j.msea.2013.09.021 ↗
14. 10.1016/j.msea.2013.12.00510.1016/j.msea.2013.12.005 ↗
15. 10.1016/j.msea.2012.03.01010.1016/j.msea.2012.03.010 ↗
16. 10.1016/j.msea.2014.03.04010.1016/j.msea.2014.03.040 ↗
17. 10.1016/j.matdes.2014.11.01810.1016/j.matdes.2014.11.018 ↗
18. 10.1179/02670830010150800910.1179/026708300101508009 ↗
19. 10.1016/j.matdes.2014.10.07010.1016/j.matdes.2014.10.070 ↗
20. 10.1007/978-0-387-76501-310.1007/978-0-387-76501-3 ↗
21. Gazizov M. · Phys. Met. Metallogr. · 2016 · 117 · 1
22. 10.1016/B978-008044164-1/50006-210.1016/B978-008044164-1/50006-2 ↗
23. 10.1179/174328005X1435710.1179/174328005X14357 ↗
24. 10.1007/s10853-014-8659-410.1007/s10853-014-8659-4 ↗
25. Porter D. A., and Esterling K. E. ‘Phase transformation in metals and alloys’, 2nd edn, 291–317; 2009, London, Chapman & Hall.10.1201/9781439883570 ↗
26. Fairman H. · 2000 · 12 · 1828
27. Hosford W. F. ‘Mechanical behavior of materials’, 1st edn, 279–307; 2005, Cambridge, Cambridge University Press.
28. 10.1007/s11661-015-2880-x10.1007/s11661-015-2880-x ↗
29. 10.1016/j.ijfatigue.2015.11.00810.1016/j.ijfatigue.2015.11.008 ↗
30. 10.1016/j.ijfatigue.2008.01.01210.1016/j.ijfatigue.2008.01.012 ↗
31. 10.1016/j.engfailanal.2014.11.02610.1016/j.engfailanal.2014.11.026 ↗
32. Kerlins V. · 1987 · 12 · 33