journal article·2018-11

Effects of yttrium on microstructure and properties of reduced activation ferritic-martensitic steel

Guoxing Qiu, Dongping Zhan, Changsheng Li, Min Qi, Zhouhua Jiang, Huishu Zhang

Materials Science and Technology· Volume 34· Issue 16
Publisher page

Abstract

This study investigates the inclusions, microstructure, tensile properties, and impact toughness of reduced activation ferritic/martensitic (RAFM) steels with different Y contents (0.006, 0.034 and 0.071 wt-%). Owing to the pinning of the grain boundary to the Y inclusions (which refines the original austenite grain size) and an existing Fe–Cr–Ta–Y–S–O phase, the tensile strength at both room and high temperatures increased with increasing Y content (below 0.071%). Increasing the Y content to 0.034 wt-% decreased the ductile-to-brittle transition temperature (DBTT). However, when the Y content reached 0.071 wt-%, the DBTT increased as the Y precipitated into blocky yttrium-rich inclusions. The microstructure, tensile properties, and impact toughness of the RAFM steel were optimised at a Y content of approximately 0.034 wt-%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang, People's Republic of China

School of Metallurgy, Northeastern University, Shenyang, People's Republic of China

School of Metallurgy Engineering, Liaoning Institute of Science and Technology, Benxi, People's Republic of China

Funding

National Natural Science Foundation of China · Fundamental Research Funds for the Central Universities

References (31)

Show source-provided references
1. 10.1016/j.fusengdes.2017.04.05810.1016/j.fusengdes.2017.04.058 ↗
2. 10.1016/j.msea.2017.09.03110.1016/j.msea.2017.09.031 ↗
3. 10.1016/S0022-3115(96)00226-710.1016/S0022-3115(96)00226-7 ↗
4. 10.1016/j.fusengdes.2016.02.03210.1016/j.fusengdes.2016.02.032 ↗
5. 10.13182/FST12-A1337910.13182/FST12-A13379 ↗
6. 10.1016/j.msea.2010.04.08410.1016/j.msea.2010.04.084 ↗
7. 10.1016/S0022-3115(98)00140-810.1016/S0022-3115(98)00140-8 ↗
8. 10.1146/annurev.matsci.38.060407.13031510.1146/annurev.matsci.38.060407.130315 ↗
9. 10.1007/s12034-014-0096-010.1007/s12034-014-0096-0 ↗
10. Paul VT · Metall Mater Trans A · 2015 · 46 · 1
11. 10.2355/isijinternational.46.2210.2355/isijinternational.46.22 ↗
12. 10.1007/s11663-999-0055-010.1007/s11663-999-0055-0 ↗
13. 10.2355/isijinternational.46.3310.2355/isijinternational.46.33 ↗
14. Wang LM · Iron Steel · 1985 · 20 · 9
15. Yan W · Chin J Nucl Sci Eng · 2009 · 29 · 50
16. 10.1016/j.jallcom.2014.02.03010.1016/j.jallcom.2014.02.030 ↗
17. 10.1016/S1006-706X(17)30136-X10.1016/S1006-706X(17)30136-X ↗
18. 10.1016/S1006-706X(16)30087-510.1016/S1006-706X(16)30087-5 ↗
19. Yang J · Baosteel Techn Res · 2008 · 2 · 43
20. Gladman T · J Iron Steel Inst · 1967 · 205 · 653
21. 10.1016/j.msea.2003.12.06510.1016/j.msea.2003.12.065 ↗
22. 10.1016/S0022-3115(02)00805-X10.1016/S0022-3115(02)00805-X ↗
23. 10.1016/j.fusengdes.2007.07.04810.1016/j.fusengdes.2007.07.048 ↗
24. 10.4028/www.scientific.net/MSF.475-479.138310.4028/www.scientific.net/MSF.475-479.1383 ↗
25. 10.1016/j.jnucmat.2015.01.00410.1016/j.jnucmat.2015.01.004 ↗
26. Gurland J · Copper Alloys · 1963 · 56 · 442
27. 10.1016/j.matdes.2014.10.07510.1016/j.matdes.2014.10.075 ↗
28. 10.1016/j.actamat.2017.06.04110.1016/j.actamat.2017.06.041 ↗
29. 10.1016/j.msea.2016.08.05110.1016/j.msea.2016.08.051 ↗
30. 10.1016/j.actamat.2018.03.04510.1016/j.actamat.2018.03.045 ↗
31. Huang QY · Chin J Nucl Sci Eng · 2007 · 27 · 41