journal article·2017-05Open access

Continuous extrusion of a commercially pure titanium powder via the Conform process

B. M. Thomas, F. Derguti, M. Jackson

Materials Science and Technology· Volume 33· Issue 7

Abstract

It is shown for the first time that cold commercially pure titanium powder can be extruded through a standard Conform machine into fully dense wire with a fine recrystallised microstructure. The grain size has been shown to decrease with increasing wheel speed with an associated increase in tensile strength. The macrostructure of the wire extrudate exhibits a characteristic flow pattern with several regions defined by differences in average grain size and distribution. Finite-element modelling of the process shows the formation of the characteristic macrostructure from powder fed Conform. The process is continuous, utilises standard equipment and does not require powder preheating or inert gas shrouding providing a footing for a true cost reduction in long-section titanium mill product.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, The University of Sheffield, Sir Robert Hadfield Building, Mappin Street, Sheffield S1 3JD, UK

Funding

Engineering and Physical Sciences Research Council

References (23)

Show source-provided references
1. 10.1016/j.msea.2007.08.08410.1016/j.msea.2007.08.084 ↗
2. 10.1016/j.pmatsci.2006.02.00310.1016/j.pmatsci.2006.02.003 ↗
3. Zhu Y. T., Lowe T. C., Valiev R. Z., and Raab G. J. ‘Continuous equal-channel angular pressing’, US Patent 7152448, 2006.
4. Green D. ‘Extrusion’, US Patent 3765216, 1973.
5. 10.1016/0026-0657(91)90550-K10.1016/0026-0657(91)90550-K ↗
6. Childs J. B., and McKenna O. P. ‘Continuous friction-actuated extrusion’, UK Patent Application 2087301 A, 1983.
7. East J., and Maxwell I. ‘Continuous extrusion of metals’, US Patent 4552520, 1985.
8. Sinha U. K., and Adams R. D. ‘Apparatus for conform extrusion of powder feed’, US Patent 5284428, 1994.
9. Pardoe J. A. · Powder Metall. · 1979 · 1 · 1
10. 10.1016/0361-3658(78)90025-510.1016/0361-3658(78)90025-5 ↗
11. 10.1179/03071698480327502510.1179/030716984803275025 ↗
12. 10.1179/mst.1991.7.5.41910.1179/mst.1991.7.5.419 ↗
13. 10.1007/s10853-010-4513-510.1007/s10853-010-4513-5 ↗
14. 10.1179/174329008X29372310.1179/174329008X293723 ↗
15. Kubina T., Dlouhy J., Kövér M., and Hodek J. ‘Preparation and thermal stability of ultra fine grained commercially pure titanium wire’, COMAT 2012, 21–22 November 2012, Plzen, Czech Republic, 1–4.
16. Duchek M. · Mater. Technol. · 2013 · 47 · 515
17. Hodek J., Kubina T., and Dlouhy J. ‘FEM model and experimental production of titanium rods using Conform machine’, ‘Metal 2013’, 15–17 May 2013, Brno, Czech Republic, 1–6.
18. Wilson R. ‘Continuous extrusion of titanium wire from powder feeds’, ‘Int. Titanium Powder Processing, Consolidation and Metallurgy Conf.’, 2–4 December 2013, Hamilton, New Zealand, 2013.
19. Wilson R., Yousuff M., Stone N. A., Ritchie D. J. B., Cantin G. M. D., Gibson M. A., and Thomas I. C. ‘Extrusion of high temperature formable non-ferrous metals’, US Patent 2014/0000332 A1, 2014.
20. 10.1016/j.jmatprotec.2012.10.01610.1016/j.jmatprotec.2012.10.016 ↗
21. ASTM International: ASTM E8/E8M-15a, Standard Test Methods for Tension Testing of Metallic Materials, 2015.
22. Scientific Forming Technologies Corporation: ‘DEFORM-2D/3D v 10.2’, available at www.deform.com.
23. Stadelmann C. ‘Extrusion von Metallpulven durch kontinuierliches Pulverstrangpressen’, PhD thesis, Universität Erlangen - Nürnberg, 2009.