Microstructural and mechanical features of aluminium semi-solid alloys made by rheocasting technique
Source abstract
Abstract
The rheocasting process applied by Swirled Enthalpy Equilibration Device (SEED) technique relies on rapid extraction of a controlled quantity of heat from the liquid aluminium alloy via mechanical agitation to form the semi-solid slurry that can be formed under pressure. Microstructural characteristics of both conventional and semi-solid A357 castings under T6 heat treatment conditions were examined using optical and scanning electron microscopy. The fatigue and tensile experiments were applied to evaluate the effect of SEED technique on the mechanical properties of T6-A357 semi-solid alloys and conventional castings. The results showed that the rheocasting–SEED technique has proved successful in producing optimum microstructure of Al–Si–Mg semi-solid alloys providing an excellent combination of quality and mechanical performance as compared to conventional technique. This paper is part of a Themed Issue on Aluminium-based materials: processing, microstructure, properties, and recycling.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Applied Sciences, University of Quebec at Chicoutimi, Saguenay, Quebec, Canada
Metallurgical Department, Cairo University, Giza, Egypt
Mechanical Engineering, Process Engineering Laboratory, Laghouat University, Algeria
References (35)
Show source-provided references
1. Rosso M. · AMME13th Gliwice-Wista · 2005 · 547
2. 10.1023/A:102190171557810.1023/A:1021901715578 ↗
3. St John D. · Materials in the automotive industry conference · 1996
4. Spada A. T. · Eng. Cast. Sol. · 2002 · 4 · 28
5. 10.1111/j.1460-2695.1997.tb00281.x10.1111/j.1460-2695.1997.tb00281.x ↗
6. 10.1046/j.8756-758x.2001.00490.x10.1046/j.8756-758x.2001.00490.x ↗
7. 10.1007/BF0264338910.1007/BF02643389 ↗
8. Taylor J. A. · Alum. Trans. · 2001 · 4 · 111
9. 10.1023/A:100480132755610.1023/A:1004801327556 ↗
10. 10.1007/BF0264444110.1007/BF02644441 ↗
11. Morri A. · Metall. Sci. Technol. · 2010 · 28 · 2
12. Doutre D., Langlais J., and Roy S. ‘The seed process for semi-solid forming’, Proceedings of the 8th international conference on semi-solid processing of alloys and composites, Limassol, 2004.
13. 10.1007/s10853-006-0838-510.1007/s10853-006-0838-5 ↗
14. 10.4028/www.scientific.net/SSP.116-117.47210.4028/www.scientific.net/SSP.116-117.472 ↗
15. 10.1016/S0921-5093(00)01248-X10.1016/S0921-5093(00)01248-X ↗
16. 10.1016/j.ijfatigue.2010.01.00110.1016/j.ijfatigue.2010.01.001 ↗
17. 10.1111/j.1460-2695.1990.tb00594.x10.1111/j.1460-2695.1990.tb00594.x ↗
18. 10.1016/S1471-5317(00)00008-010.1016/S1471-5317(00)00008-0 ↗
19. Polmear I. J. · Mater. Forum · 2004 · 28 · 1
20. 10.1007/s11661-001-0069-y10.1007/s11661-001-0069-y ↗
21. Bergsma S. C. · Metall. Sci. Technol. · 2000 · 18 · 21
22. 10.1016/S1471-5317(01)00006-210.1016/S1471-5317(01)00006-2 ↗
23. 10.1080/13640461.2000.1181937510.1080/13640461.2000.11819375 ↗
24. 10.1007/s12540-013-4019-110.1007/s12540-013-4019-1 ↗
25. 10.1179/1743284712Y.000000012410.1179/1743284712Y.0000000124 ↗
26. 10.1007/s11665-015-1602-210.1007/s11665-015-1602-2 ↗
27. Wickberg A. · SAE Trans. · 1984 · 93 · 728
28. Lampman S. R. · Fatigue and fracture · 1996
29. 10.1016/S0921-5093(01)01713-010.1016/S0921-5093(01)01713-0 ↗
30. 10.4028/www.scientific.net/MSF.396-402.135310.4028/www.scientific.net/MSF.396-402.1353 ↗
31. Davidson C. J. · Metall. Sci. Technol. · 2000 · 18 · 27
32. 10.4028/www.scientific.net/SSP.141-143.72510.4028/www.scientific.net/SSP.141-143.725 ↗
33. 10.1111/j.1460-2695.2011.01577.x10.1111/j.1460-2695.2011.01577.x ↗
34. 10.1155/2010/84560910.1155/2010/845609 ↗
35. Drouzy M. · Int. Cast Met. J. · 1980 · 5 · 43